It is generally accepted that high temperature superconductors emerge when extra carriers are introduced in the parent state, which looks like a Mott insulator. Competition of the order parameters drives the system into a poorly defined pseudogap sta...
Lattice distortions constitute one of the main features characterizing high entropy alloys. Local lattice distortions have, however, only rarely been investigated in these multi-component alloys. We, therefore, employ a combined theoretical electroni...
Thorium monocarbide (ThC) is interesting as an alternative fertile material to be used in nuclear breeder systems and thorium molten salt reactors because of its high thermal conductivity, good irradiation performance, and wide homogeneous compositio...
Recently, the irradiation behaviors of multi-component alloys have stimulated an increasing interest due to their ability to suppress the growth of irradiation defects, though the mostly studied alloys are limited to face centered cubic (fcc) structu...
Refractory high entropy alloys (HEA), such as BCC NbMoTaW, represent a promising materials class for next-generation high-temperature applications, due to their extraordinary mechanical properties. A characteristic feature of HEAs is the formation of...
Using the ab initio calculations, we study the lattice distortion of HfNbTaTiVC5, HfNbTaTiZrC5 and MoNbTaTiVC5 high-entropy carbide (HEC) ceramics. Results indicate that the Bader atomic radius and charge transfer in HECs is very close to those from...
In the present study, we have revealed that (NiCoFeCr)100−xPdx (x= 1, 3, 5, 20 atom%) high-entropy alloys (HEAs) have both local- and long-range lattice distortions by utilizing X-ray total scattering, X-ray diffraction, and extended X-ray abso...
Medium-entropy alloys (MEAs) have attracted significant attention due to their unique structure–property relationships. In this study, we examine the effects of lattice distortion on the mechanical properties of Nb-Ti-V-Zr MEAs, focusing on two...
The rapid evolution in materials science has resulted in a significant interest in high-entropy alloys (HEAs) for their unique properties. This study focuses on understanding both quaternary and quinary body-centered cubic (BCC) of 12 refractory-base...
Taking Bismuth Titanate (Bi4Ti3O12) as a Aurivillius-type compound with m = 3 for example, the ion (W6+/Cr3+) doping effect on the lattice distortion and interlayer mismatch of Bi4Ti3O12 structure were investigated by stress analysis, based on an ela...
In this paper, with the synergistic effect of C, Co and O elements, and with a one-dimensional carbon nanotube (CNT) as the structure guide agent, a two-dimensional Co3O4 nano-sheet with high catalytic activity was prepared, and its catalytic activit...
It is well demonstrated that the complex chemical fluctuations on high/medium-entropy alloys (H/MEAs) play critical roles in their deformation process, but there are few reports related to the effect of such complex chemical fluctuations on the crack...
Friction and wear properties of hot working die steel at above 800 °C are of particular interest for high temperature applications. Here, novel AlCoCrFeNiWx high-entropy alloy (HEA) coatings have been fabricated on the surface of hot working die stee...
The Laser Powder-Bed Fusion (LPBF) process produces complex part geometry by selectively sintering powder metal layer upon layer. During the LPBF process, parts experience the challenge of residual stress, distortions, and print failures. Lattice-bas...
We investigated the anisotropic thermoelectric properties of the Bi2Te2.85Se0.15Ix (x = 0.0, 0.1, 0.3, 0.5 mol.%) compounds, synthesized by ball-milling and hot-press sintering. The electrical conductivities of the Bi2Te2.85Se0.15Ix were significantl...
This paper concerns finite elasto-plasticity of crystalline materials with micro-structural defects. We revisit the basic concepts: plastic distortion and decomposition of the plastic connection. The body is endowed with a structure of differential m...
In thermoelectrics, entropy engineering as an emerging paradigm-shifting strategy can simultaneously enhance the crystal symmetry, increase the solubility limit of specific elements, and reduce the lattice thermal conductivity. However, the severe la...
We theoretically investigate the stability of double-Q square skyrmion crystals under uniaxial distortion. Using an effective spin model with frustrated exchange interactions and bond-dependent anisotropy in momentum space, we construct the low-tempe...
Cathode materials of energy storage batteries have attracted extensive attention because of the importance in deciding the rate performance and long cycle property of batteries. Herein, we report a simple and environmentally friendly solvothermal met...
Half-Heusler alloys are promising materials for thermoelectric applications, yet the impact of the compositional disorder on their lattice dynamics remains incompletely understood. This study investigates the effect of systematic Zr substitution on t...
Series of ceria-zirconia (CZ)-based nano-materials with a d50 in the range of 0.2 to 1.3 microns were made using the jar milling, Eiger milling, and steam jet milling (SJM) techniques. The effect of the milling conditions on the morphology and textur...
In situ atomic-scale bending tests of twin-structured Ni nanowires were realised using a homemade deformation device. The results showed that the plastic deformation mechanism in twin-structured Ni nanowires depended on the deformation stage. At the...
Two-dimensional (2D) molybdenum telluride (MoTe2) is attracting increasing attention for its potential applications in electronic, optoelectronic, photonic and catalytic fields, owing to the unique band structures of both stable 2H phase and 1T&prime...
In this paper, we report that two newly designed high entropy bulk metallic glasses (HE-BMGs), Ti20Hf20Cu20Ni20Be20 with a critical diameter of 2 mm, and Ti16.7Zr16.7Nb16.7Cu16.7Ni16.7Be16.7 with a critical diameter of 1.5 mm, can be fabricated by co...
Using large-scale atomistic simulations, dislocation mechanics in the presence of linear complexions are investigated in an Fe-Ni alloy, where the complexions appear as nanoparticle arrays along edge dislocation lines. When mechanical shear stress is...
Three-layer iron-rich Fe3+xSi1−x/Ge/Fe3+xSi1−x (0.2 < x < 0.64) heterostructures on a Si(111) surface with Ge thicknesses of 4 nm and 7 nm were grown by molecular beam epitaxy. Systematic studies of the structural and morphological...
The present study was aimed at determining the surface strain/stress state in an Ni-based single-crystal (SC) superalloy that was subjected to two different cooling rates from solid solution temperature through using the X-ray diffraction (XRD) metho...
Lattice distortion and amorphization of carbon-doped SUS304 by variation of the laser output were investigated in terms of phase formation and the bonding state. The laser output was changed by 10% in the range of 60% to 100% after covering the SUS30...
Complex concentrated alloys (CCAs) are structural and functional materials of the future with excellent mechanical, physical, and chemical properties. Due to the equiatomic compositions of these alloys, cost can hinder scalability. Thus, the developm...
MgTi1−x(Mn1/3Nb2/3)xO3 (x = 0–0.30) ceramics were prepared via the solid-state reaction method. The phase composition, microstructure, bond characteristics, and microwave dielectric properties of MgTi1−x(Mn1/3Nb2/3)xO3 (x = 0–...
Highly (0002)-oriented Al1−xScxN thin films with different Sc doping concentrations (x = 0, 0.2, 0.25, 0.3, and 0.43) were prepared via a magnetron sputtering system. The effects of Sc doping on the crystal structure and electrical property of the as...
In this study, first-principles calculations were employed to analyze the effect of Si and O doping on the electronic structure of the Fe/Zn interface, aiming to reveal the mechanism underlying the degradation of its interfacial stability. Through de...
CoCrNi medium-entropy alloys (MEAs) have emerged as a promising class of structural materials due to their exceptional strength–ductility synergy. However, the lack of composition-dependent predictive models severely hinders rational alloy desi...
The cohesive performance and durability of the bonding layer with semiconductor substrates are of paramount importance for realizing the high thermal conductivity capabilities of diamond. Utilizing electron beam evaporation and the room-temperature,...
An Li1.3Al0.3SnxTi1.7−x(PO4)3 (LATP-xSn) ceramic solid electrolyte was prepared by Sn doping via a solid phase method. The results showed that adding an Sn dopant with a larger ionic radius in a concentration of x = 0.35 enabled one to equivale...
CrAlN and CrAlBN coatings were prepared on the surface of high-speed steel and shaper cutter by physical vapor deposition (PVD) technique using arc ion source. In the process of coating preparation, the adhesive layers were deposited by low bias volt...
The stability and mechanical properties of (TiZrHf)1−x(AB)x (AB = NbTa, NbMo, MoTa) refractory high-entropy alloys have been investigated by combining the first-principles with special quasi-random structure (SQS) method. It is found that with...
Solid-state electrolytes are currently receiving increasing interest due to their high mechanical strength and chemical stability for safe battery construction. However, their poor ion conduction and unclear conduction mechanism need further improvem...
Three-dimensional hybrid organic–inorganic lead halide perovskites are promising photovoltaic and light-emitting materials. A key phenomenon relevant for their optoelectronic applications is electron–phonon coupling. Since it can be stron...
TiO2 is an abundant material on Earth, essential for the sustainable and cost-effective development of various technologies, with anatase being the most effective polymorph for photocatalytic and photovoltaic applications. Bulk crystalline anatase Ti...
In this study, high-entropy alloy films, namely, AlCrTaTiZr/AlCrTaTiZr-N, were deposited on the n-type (100) silicon substrate. Then, a copper film was deposited on the high-entropy alloy films. The diffusion barrier performance of AlCrTaTiZr/AlCrTaT...
The conventional rolling of magnesium alloy with a single pass and large reduction will cause severe edge cracking. The sheet without cracks can be achieved by limited width rolling. The microstructure evolution of the sheet with cracks after convent...
A novel negative thermal expansion (NTE) material composed of Sm0.85Sr0.15MnO3-δ was synthesized using the solid-state method. By allowing Sr2+ to partially replace Sm3+ in SmMnO3, the ceramic material Sm0.85Sr0.15MnO3-δ exhibits NTE prop...
The effect of NaCl at extremely high concentrations from 3.5 to 14 wt. % on the crystallization of CaCO3 was investigated in depth. The static test experiment verified that the Ca2+ retention efficiency (η) of NaCl on CaCO3 scale increased from 3...
Spinel-type cobalt oxide is a highly active catalyst for oxidation reactions owing to its remarkable redox properties, although it generally exhibits poor mechanical, textural and structural properties. Supporting this material on a porous alumina ca...
In recent years, high-entropy materials (HEMs) have emerged as a promising multifunctional material system, garnering significant interest in the field of photocatalysis due to their tunable microstructures, diverse compositions, and unique electroni...
We study the coupled charge-lattice dynamics in the commensurate charge density wave (CDW) phase of the layered compound 1T-TaS 2 driven by an ultrashort laser pulse. For describing its electronic structure, we employ a tight-binding model of...
Equiatomic CoCrNi medium-entropy alloys exhibit superior strength and ductility. In this work, a non-equiatomic CoCrNi alloy with low stacking fault energy was designed, and different fractions of V were added to control the stacking fault energy and...
The study is devoted to heavily drawn multicore Cu–18Nb composites of cylindrical and rectangular shapes. The composites were fabricated by the melt-and-deform method, namely, 600 in situ rods of Cu–18%Nb alloy were assembled in a copper...
This letter proposes a novel design for a printed 5G monopole antenna on a vehicle window glass. The proposed antenna consists of a coplanar waveguide (CPW), a monopole radiator, parasitic elements, and a lattice-structure reflector. The parasitic el...
of 10