The large-scale coke oven is a developing trend in coking technology, and the influence of the industrial coke oven size on the quality of metallurgical coke needs to be revealed. Under the same raw coals and blending ratios, metallurgical cokes were...
Coke oven gas (COG), as a by-product of the coking process and a mixture with a high hydrogen content, is an important potential component of the sustainable economy of the coking industry. Ongoing studies and analyses are looking at many opportuniti...
This study conducted a Life Cycle Assessment (LCA) of alternative (electric and hydrogen) and conventional diesel buses in a large metropolitan area. The primary focus was on hydrogen derived from coke oven gas, a byproduct of the coking process, whi...
To investigate the combustion process and reduce Nitric Oxide (NO) emissions in the vertical heating flue of air-staged coke ovens, a three-dimensional computational fluid dynamics method was applied to simulate the combustion process. The model inte...
The main objective of the article is to develop the concept of flock fragmentation and the averaging method for the application of electrocoagulation in the process of treating wastewater from coke ovens. The designed solution was part of an innovati...
A large amount of COG (coke oven gas) is produced from coking plants every year, which contains 55–60% H2. In this work, the breakthrough separation of H2 from COG with ZIF-8/ethylene glycol-water slurry was studied. Following the investigation...
Coke production is still of great economic importance due to its crucial role in the steel production process. The reliability of the operation of coke oven batteries depends on the maintenance of good technical condition of their ceramic massif, whi...
The ultra-deep removal of thiophene is essential for the conversion of coke oven gas to methane and metal modified Y zeolite has excellent thiophene adsorption capacity. The effects of temperature on chemisorption between metal modified Y zeolite and...
10 March 2020
Coke production was classified as carcinogenic to humans by the International Agency for Research on Cancer. Besides polycyclic aromatic hydrocarbons, coke oven workers may be exposed to benzene and other volatile organic compounds (VOCs). The aim of...
China possesses a substantial capacity for coke production, resulting in the annual generation of over 100 billion standard cubic meters of the by-product coke oven gas. The comprehensive utilization of this gas has emerged as a matter of significant...
Coke oven gas (COG) injection from the dome in a COREX melter gasifier is a good method to not only reduce the amount of solid fuel used for gasification, but also to adjust the freeboard temperature that should be maintained within a certain range....
Methanol and ammonia are important chemical materials in the chemical industry. During the production of methanol and ammonia, a large amount of waste heat is released. The waste heat can be used to save energy and reduce CO2 emissions. In this study...
Driven by the urgent reduction in industrial energy consumption and nitrogen oxide (NOx) emissions, numerical simulation becomes a significant tool to understand the internal working process and optimize the structure of the combustion chamber in cok...
A heat recovery coke oven (HRCO) is one of important approaches to achieving a carbon peak and carbon neutrality in China. However, the steady operation of an HRCO is significantly influenced by the internal working conditions and the quality of lini...
This paper focuses on the best way to produce methanol by Coke Oven Gas (COG) conversion and by carbon dioxide capture. The COG, produced in steelworks and coking plants, is an interesting source of hydrogen that can be used to hydrogenate carbon dio...
A novel low-NOx burner was proposed in this study to achieve the stable and clean combustion of low- and medium-calorific-value gas and promote energy sustainability, and the influence of the gas pipe structure on the burner’s characteristics w...
Turbulences in energy prices have a major effect on the energy industry. These disturbances should allow more efficient operation and the optimisation of technologies, leading to more versatile operation with model-based methods. In our study, a coke...
In this study, uncertainties related to NH3 concentration, emission factor, and emission factor estimation in the exhaust gas of the steel sintering furnace using COG (coke oven gas) among the by-product gas generated in steel production was estimate...
This study presents a sustainable upcycling strategy to convert “Pit,” a carbon-rich coke oven by-product from steel manufacturing, into high-purity graphite for use as an anode material in lithium-ion batteries. Despite its high carbon c...
This study discusses the oxidation induration and swelling behavior of chromium-bearing vanadium titanomagnetite pellets (CVTP) with Co2O3 additions. The reduction swelling index (RSI) and compressive strength of reduced CVTP (CSRC) were investigated...
In the manufacture of steel and foundry coke, there are a series of circumstances inherent to the process which can affect the life of the refractory material with which the ovens of the batteries are built. This article will deal with the impact of...
Research is being actively conducted to improve the carbon deposition and sintering resistance of Ni-based catalysts. Among them, the Al2O3-supported Ni catalyst has been broadly studied for the dry reforming reaction due to its high CH4 activity at...
Although the time for operating mines and coking plants in many countries is coming to an end due to climate change, we must still ensure that the pollution generated by this source of the economy is minimized. Despite the several stages of treatment...
The aim of this paper is to quantify the amounts of volatile organic compounds (VOCs) emitted from a coke oven in a steel plant in Taiwan and estimate the emission factors of VOCs using an innovative sampling technique. The identification of VOCs emi...
It is important to convert alkane-rich gases, such as coke oven gas, to value-added chemicals rather than direct emission or combustion. Abundant nitrogen/oxygen substances are present in the actual alkane-rich gases. However, the research about how...
A coding ruler is a device that marks position information in the fordigital signals, and a code reader is a device that decodes the signals on the coding ruler and converts them into digital signals. The code reader and encoder ruler are key devices...
This article highlights the need to reduce carbon dioxide emissions by reducing energy consumption. Of course, this can be achieved in various ways, but inter alia, through the practical implementation of the assumptions contained in the CSR programs...
The steel industry is among the highest carbon-emitting industrial sectors. Since the steel production process is already exhaustively optimized, alternative routes are sought in order to increase carbon efficiency and reduce these emissions. During...
Removal of hydrogen sulfide (H2S) from coke oven gas has attracted increasing attention due to economic and environmental concerns. In this study, tannin extract (TE) absorption combined with binuclear sulfonated phthalocyanine cobalt organic polymer...
In order to realize the resource utilization of coal gasification slag (CGS) and to effectively control the emission of nitrogen oxides (NOx) in coke oven gas, the effect of the reaction conditions and vanadium loading over the CGS catalysts was carr...
Coking with low moisture coal is an important link of energy conservation and coke quality improvement in the coking industry. Aiming at the problems of dust emission and bad accumulation in the coking chamber during coal charging, a new system of co...
Coke-making technology utilises two systems for charging the coke oven chambers with coal—a stamp-charged system (stamp-charging) and a gravity charged system (top charging). The presented study examines the impact of selected coal properties o...
Off-gas is one of the by-products of the steelmaking process. Its potential energy can be transformed into heat and electricity by means of cogeneration. A case study using a coke oven and Linz–Donawitz converter gas is presented. This work add...
This work aimed to investigate the carbonaceous deposits on the surface of the coking chamber. Scanning electron microscopy (SEM), X-ray fluorescence spectrum (XRF), Fourier transform infrared spectrometer (FTIR), Raman spectroscopy, X-ray diffractio...
Gas injection structures were designed for a vertical oven to improve the gas–solid flow countercurrent structure. This work measured the wall temperature distribution of the vertical oven to reflect gas velocity distribution, and simulated the...
Fossil fuels are being progressively substituted by a cleaner and more environmentally friendly form of energy, where hydrogen fuel cells stand out. However, the implementation of a competitive hydrogen economy still presents several challenges relat...
In this study, a series of experiments were conducted on a testing facility and a real-scale furnace, for analyzing the nitric oxide (NO) emission reduction. The effects of the temperature, oxygen concentration, and amount of secondary combustion air...
Carbon solution loss reaction of coke gasification is one of the most important reasons for coke deterioration and degradation in a blast furnace. It also affects the permeability of gas and fluids, as well as stable working conditions. In this paper...
The resource endowment structure of being coal-rich and oil-poor makes China’s production of coal-based ammonia and urea, with a low production cost and a good market, a competitive advantage. However, the process suffers from high CO2 emission...
The coalification rank of the coal blend components and their caking properties initially impact the coke’s quality. In part, the quality of coke depends on the technological parameters of the coke production technology, such as the method of b...
The phenomenon of coking pressure is crucial for cokemaking both in respect of a safe coke oven battery operation and a proper quality of the produced coke. In spite of that, the mechanism of this phenomenon has not been clearly explained yet. The ai...
A series of experimental coal pyrolysis studies were conducted to define the parameters of a kinetic model to enable complete mass and energy balances by identifying basic process products. The developed model determines the chemical enthalpy of pyro...
In Japan, mechanical plastic recycling has been widely practiced. In recent years, the chemical recycling method has been gaining interest, especially due to its high-quality products similar to virgin materials. Understanding the environmental impac...
The prospects of processing blast furnace and steelmaking sludge using the Waelz process in a laboratory rotary kiln, is shown. The influence of different processing temperatures, furnace atmosphere and the type of reducing agents on the level of zin...
22 June 2022
Polycyclic aromatic hydrocarbons (PAHs) are considered to be endocrine disruptors. In this study, the evidence on the association between PAHs and diabetes was systematically reviewed. PubMed, EMBASE, and ISI Web of Science were systematically search...
25 March 2020
A follow-up study of a cohort of workers from a coke plant compared with a control group from the same industrial area was conducted in 2019. The recruitment and environmental and biomarker measurements were performed during 1993/1994. The environmen...
China is the largest producer and exporter of coke globally, which means that it is very important to understand the characteristics of air pollutants and carbon emissions from China’s independent coking industry. This study was the first to es...
Notwithstanding the enforcement of ATEX EU Directives (94/9/EC of 23 March 1994) and safety management system application, explosions in the coal sector still claim lives and cause huge economic losses. Even a consolidated activity like coke dry dist...
The iron and steel industry is a major CO2 emitter and an important subject for the implementation of carbon emission reduction goals and tasks. Due to the complex ore composition and low iron grade, vanadium–bearing titanomagnetite smelting in...
29 May 2015
Petroleum coke, or petcoke, is a granular coal-like industrial by-product that is separated during the refinement of heavy crude oil. Recently, the processing of material from Canadian oil sands in U.S. refineries has led to the appearance of large p...
of 2