In this study, we simulated the electric field distribution of side-by-side electrospinning by using the finite element method (FEM), and studied the effects of spinneret wall thickness, spinning voltage and receiving distance on the distribution of...
This article provides an overview on manufacturing composite carbon nanofiber-based aerogels through freeze casting technology. As known, freeze casting is a relatively new manufacturing technique for generating highly porous structures. During the p...
Molybdenum carbide was supported on three types of carbon support—activated carbon; multi-walled carbon nanotubes; and carbon nanofibers—using ammonium molybdate and molybdic acid as Mo precursors. The use of activated carbon as support afforded an X...
Recently, the nanofiber materials derived from natural polymers instead of petroleum-based polymers by electrospinning have aroused a great deal of interests. The lignocellulosic biomass could not be electrospun into nanofiber directly due to its poo...
Magnetic nanofibers can be fabricated by adding nanoparticles in polymer solution using electrospinning method. The advantages of such nanofibers include a large surface-to-volume ratio and high porosity, which makes them promising for sensing applic...
Polyacrylonitrile (PAN) nanofiber mats are typical precursors for carbon nanofibers. They can be fixed or even elongated during stabilization and subsequent carbonization to gain straight, mechanically robust carbon nanofibers. These processes necess...
Polyacrylonitrile (PAN) is one of the materials most often used for carbonization. PAN nanofiber mats, created by electrospinning, are an especially interesting source to gain carbon nanofibers. A well-known problem in this process is fixing the PAN...
Porous carbon materials are used for many electrochemical applications due to their outstanding properties. However, research on controlling the pore structure and analyzing the carbon structures is still necessary to achieve enhanced electrochemical...
Carbon nanofibers are produced from dielectric polymer precursors such as polyacrylonitrile (PAN). Carbonized nanofiber nonwovens show high surface area and good electrical conductivity, rendering these fiber materials interesting for application as...
This research describes the adsorption of Cu2+ onto a helical ribbon carbon nanofiber. The characterization of carbon nanofiber by zeta potential showed an isoelectronic pH of 1.9. The influence of different adsorption factors, such as stirring speed...
Coaxial electrospinning has been considered a straightforward and convenient method for producing hollow nanofibers. Therefore, the objective of this study was to develop hollow activated carbon nanofibers (HACNFs) for CO2 capture in order to reduce...
Carbon nanofiber mats can be applied for diverse energy applications. Usually, they should be freestanding and show sufficient structural stability. Poly(acrylonitrile) (PAN) is often used as the base material for electrospinning due to its high carb...
Entangled networks of carbon nanofibers are characterized both mechanically and electrically. Results for both tensile and compressive loadings of the entangled networks are presented for various densities. Mechanically, the nanofiber ensembles follo...
Electrospinning techniques have become an efficient way to produce continuous and porous carbon nanofibers. In view of CO2 capture as one of the important works for alleviating global warming, this study intended to synthesize polyacrylonitrile (PAN)...
This work aimed to identify and address the main challenges associated with fabricating large samples of carbon foams composed of interwoven networks of carbon nanofibers. Solutions to two difficulties related with the process of fabricating carbon f...
The zeolitic imidazolate framework (ZIF−8)@polyacrylonitrile (PAN) nanofiber membrane was prepared and carbonized for heavy metal cadmium ion (Cd2+) adsorption in aqueous medium. Zinc oxide (ZnO) was first sputtered onto the surface of the PAN...
Electrospinning enables simple and cost-effective production of magnetic nanofibers by adding nanoparticles to a polymer solution. In order to increase the electrical conductivity of such nanofibers, the carbonization process is crucial. In this stud...
Carbon nanofibers decorated with various metal oxide nanoparticles were fabricated by combining an electrospinning technique of bicomponent polymer mixture and a sol-gel reaction and subsequent carbonization process. Electrospun polymer nanofibers co...
Carbon nanofibers are used for a broad range of applications, from nano-composites to energy storage devices. They are typically produced from electrospun poly(acrylonitrile) nanofibers by thermal stabilization and carbonization. The nanofiber mats a...
In recent years, ecological issues have led to the search for new green materials from biomass as precursors for producing carbon materials (CNFs). Such green materials are more attractive than traditional petroleum-based materials, which are environ...
Polyacrylonitrile (PAN) nanofibers, prepared by electrospinning, are often used as a precursor for carbon nanofibers. The thermal carbonization process necessitates a preceding oxidative stabilization, which is usually performed thermally, i.e., by c...
Polyacrylonitrile (PAN)-derived carbon nanofiber mats were fabricated using electrospinning and further carbonization. Scanning electron microscopy (SEM), X-ray diffraction (XRD) and electrochemical characterization were used to investigate the effec...
Room-temperature gas sensors based on granulated carbon nanofiber material were investigated for the detection of NO2. The granulated material consisting of intertwined carbon nanofibers was synthesized by the decomposition of CH4 over the Ni/Al2O3 c...
The formula describing the relationship between the dielectric constant of a composite and the dielectric constants or volume rates of its components is called a dielectric model. The establishment of a cement concrete dielectric model is the basic a...
Lithium metal is regarded as ideal anode material due to its high theoretical specific capacity and low electrode potential. However, the uncontrollable growth of lithium dendrites seriously hinders the practical application of lithium-metal batterie...
Electrospun porous carbon nanofiber mats have excellent properties, such as a large surface area, tunable porosity, and excellent electrical conductivity, and have attracted great attention in energy storage and power generation applications. Moreove...
Sol-gel electrospinning process was used to prepare electrospun carbon nanofibers (ECNFs) from polyacrylonitrile and graphite nanoplatelets. The nanofibers of as-electrospun carbon were calcinated in argon from room temperature to 500 °C for 1h....
The article describes obtaining polyacrylonitrile (PAN) nanofibers by electrospinning on a setup developed at the Mendeleev University of Chemical Technology of Russia (MUCTR). A technique for producing PAN-based carbon nanofibers (CNFs) and PAN-base...
The use of electrospun carbon nanofibers (ECNs) has been the focus of considerable interest due to their potential implementation in sensing. These ECNs have unique structural and morphological features such as high surface area-to-volume ratio, cros...
In recent years, carbon nanofibers have been investigated as a suitable reinforcement for cementitious composites to yield novel multifunctional materials with improved mechanical, electrical, magnetic, and self-sensing behavior. Despite several stud...
Electrospun fibers with different concentrations of polyacrylonitrile (PAN) were synthesized and the results are reported in this study. The aim was to obtain carbon nanofibers for manufacturing gas diffusion layers for proton exchange membrane (PEM)...
Thermally stabilized and subsequently carbonized nanofibers are a promising material for many technical applications in fields such as tissue engineering or energy storage. They can be obtained from a variety of different polymer precursors via elect...
Nanofiber mats with a high surface-to-volume ratio can be prepared by electrospinning. The Porosity is sometimes reported to be tunable by blending different materials, e.g., water-soluble poly(ethylene oxide) (PEO) with not water-soluble poly(acrylo...
In order to overcome the poor electrical conductivity of titania (TiO2) and silica (SiO2) anode materials for lithium ion batteries (LIBs), we herein report a facile preparation of integrated titania–silica–carbon (TSC) nanofibers via ele...
Porous carbon nanofibers are widely used as supercapacitor electrode materials due to their excellent physical adsorption/desorption operation and smooth transport of ions. The acid/base activation method is commonly used to generate micropores on th...
In this paper, a new synthesis of carbon nanofibers (CNFs)/carbon nanowalls (CNWs) was performed to improve the characteristics of anode materials of lithium-ion batteries by using the advantages offered by CNWs and CNFs. Among the carbon-based nanom...
In this study, carbon nanofiber-supported Pd nanoparticles were used in the hydrogenation of cinnamaldehyde and in the dehydrogenation of cinnamyl alcohol. The different graphitisation of the surface of the nanofibers and the amount of oxygen functio...
The main aim of this study is to investigate the effect of fragmentation of electrospun carbon nanofibers (eCNFs) obtained at different temperatures, i.e., at 750 °C, 1000 °C, 1500 °C, 1750 °C and 2000 °C on the cellular response...
The development of smart negative electrode materials with high capacitance for the uses in supercapacitors remains challenging. Although several types of electrode materials with high capacitance in energy storage have been reported, carbon-based ma...
MXenes consisting of thin layers of transition metal carbides or nitrides are good candidates for electrode materials due to their excellent electrical conductivity and fast ion transfer. Electrospun carbon nanofibers are highly porous and electrical...
Three types of carbon nanofibers (pyrolytically stripped carbon nanofibers (PS), low-temperature heat treated carbon nanofibers (LHT), and high-temperature heat treated carbon nanofibers (HHT)) with different graphitization degrees and surface chemis...
Carbon nanofibers (CNFs) are usually prepared by the carbonization of cellulose aerogels obtained from freeze-drying. However, cellulose with low concentration (below 1 wt%) is required to maintain the good porosity of the aerogels due to the strong...
The study compared the biosensing properties of laccase biosensors based on carbon nanofibers (CNFs) and copper/carbon composite nanofibers (Cu/CNFs). The two kinds of nanofibers were prepared by electrospinning and carbonization under the same condi...
Phosphorylated carbons have been reported to be effective catalysts in dehydration reactions for biomass valorization. The amount and the nature of P groups are a key parameter affecting the catalytic performances of functionalized materials. Herein,...
Carbon nanofibers (CNFs) are the most basic structure of one-dimensional nanometer-scale sp2 carbon. The CNF’s structure provides fast current transfer and a large surface area and it is widely used as an energy storage material and as a sensor...
Recently, electrocatalysts for oxygen reduction reaction (ORR) as well as oxygen evolution reaction (OER) hinged on electrospun nanofiber composites have attracted wide research attention. Transition metal elements and heteroatomic doping are importa...
The demand for multifunctional requirements in aerospace, military, automobile, sports, and energy applications has encouraged the investigation of new composite materials. This study focuses on the development of multiwall carbon nanotube (MWCNT) fi...
The morphology and chemical composition of carbon nanofibers in situ grown on a large carbon-fiber woven fabric are studied using SEM measurements, X-ray Diffraction, X-ray Flourescence, and X-ray Photoelectron Spectroscopy. Results show that nanofib...
Owing to their high electrical conductivity, high surface area, low density, high thermal stability, and chemical stability, carbon nanofibers have been used in many fields, including energy storage, electromagnetic shielding, filtering, composites,...
Organic carbon extracted from direct coal liquefaction residue (DLCR) is an ideal precursor for the preparation of carbon materials. However, investigations into the utilization of the extraction residue (ER) are rarely reported. In this work, ER fro...
of 18