We have performed full-stack research of Pd1−xFex and Pd1-xCox (x = 0.01–0.1) alloys. At the first stage, the occurrence of impurity ferromagnetism in the considered alloys was studied employing the density functional theory (DFT). At the...
The design of efficient and cost-effective electrocatalysts to replace Pt in an oxygen reduction reaction (ORR) is crucial for advancing proton exchange membrane fuel cell (PEMFC) technologies. This study synthesized Pd-Co bimetallic alloy nanopartic...
To realize the benefits of a hydrogen economy, hydrogen must be produced cleanly, efficiently and affordably from renewable resources and, preferentially, close to the end-users. The goal is a sustainable cycle of hydrogen production and use: in the...
In this study, the Pd3Co1 alloy nanocluster from a multiwalled carbon nanotube (MWCTN) catalyst was fabricated in deep eutectic solvents (DESs) (referred to Pd3Co1/CNTs). The catalyst shows a better mass activity towards the formic acid oxidation rea...
The great success of anodic alumina membranes is due to their morphological features coupled to both thermal and chemical stability. The electrochemical fabrication allows accurate control of the porous structure: in fact, the membrane morphological...
This article details the development and characterization of binary palladium alloys synthesized via a hydrothermal process. Palladium alloys, being good redox catalysts, could potentially replace platinum in many applications such as in dye sensitiz...
The microstructure, phase constitution, and corrosion performance of as-solidified Al70Pd25Co5 and Al74Pd12Co14 alloys (element concentrations in at.%) have been investigated in the present work. The alloys were prepared by arc-melting of Al, Pd, and...
The alloying of noble metals with Cu is one of the most effective strategies for improving catalytic performance and reducing cost in electrocatalytic carbon dioxide reduction reactions (CO2RR). Previous works usually focused on the influence of morp...
Quaternary Ni-Ti-Cu-Pd formulations were cast by vacuum induction melting (VIM) with the aim of preparing low-hysteresis shape memory alloys and verifying the applicability of the Co-Factor theory in conventional industrial manufacturing processes. T...
In the present paper, the influence of partial substitution of Mn by Pd on structure, thermomagnetic properties, and phase transitions in the MnCoGe alloys was investigated. The studies of phase constitution revealed an occurrence of the orthorhombic...
Palladium satisfies most of the requirements for an effective hydrogen storage material with two major drawbacks: it has a relatively low gravimetric hydrogen density and is prohibitively expensive for large scale applications. Pd-based alloys should...
The hydrothermal fabrication and characterization of ternary palladium alloys PdNiCo and PdNiCo-rGO, which could be potential replacements to the expensive and corrosion susceptible platinum counter electrode in dye sensitized solar cells is hereby r...
We reveal the Suzuki–Miyaura reaction catalyzed by a Pd–Co nanocatalyst supported by Mg–Fe–CHT (calcined hydrotalcites). A variety of boronic acids and aryl halides were transformed into functionalized biphenyls in excellent y...
Converting carbon dioxide into high-value-added formic acid as a basic raw material for the chemical industry via an electrochemical process under ambient conditions not only alleviates greenhouse gas effects but also contributes to effective carbon...
CoCrFeNiPdMnx (x = 0, 0.2, 0.4, 0.6, 0.8) high entropy alloys (HEAs) were prepared and characterized. With an increase in Mn addition, the microstructures changed from dendrites (CoCrFeNiPd with a single face-centered-cubic (FCC) phase) to divorced e...
Bimetallic catalysts can provide enhanced performance, and Co-based catalysts in particular have been studied in various respects for their activity in the deposition of carbon nanofibers (CNFs). The majority of studies on CNF catalysis use co-precip...
In the present study, we have revealed that (NiCoFeCr)100−xPdx (x= 1, 3, 5, 20 atom%) high-entropy alloys (HEAs) have both local- and long-range lattice distortions by utilizing X-ray total scattering, X-ray diffraction, and extended X-ray abso...
The aim of this work was high-temperature synthesis of PtPdCoNiCu/C nanoparticles with high-entropy alloy (HEA) structure as catalysts for oxygen reduction reaction. The materials were synthesized using a highly dispersed PtPd/C support, which was im...
The development of catalysts for low-temperature methane combustion is crucial in addressing the greenhouse effect. An effective industrial catalyst strategy involves optimizing noble metal utilization and boosting metal–metal interaction. Here...
Membrane technology is recognized as a scientific sector of multidisciplinary interest.[...]
Local structure of Pd1 single sites on the surface of Pd1In1 intermetallic nanoparticles supported on α-Al2O3 was investigated by the combination of CO-DRIFTS spectroscopy and DFT. CO-DRIFTS spectra of PdIn/Al2O3 catalyst exhibit only one asymmetric...
Alloying Pd with Cu is important for catalytic reactions such as denitrification reaction and CO oxidation reaction, but understanding of the catalyst preparation and its correlation with the catalyst’s activity and selectivity remains elusive. Herei...
The recrystallization behavior, grain growth kinetics, and corresponding hardness variation of homogenized and 80% cold-rolled FeCoNiCrPd, FeCoNiCrMn, and their quaternary/ternary FCC-structured high/medium entropy alloys (H/MEAs) annealed under diff...
This review extensively discusses current developments in bimetallic nanoparticle–GO and bimetallic nanoparticle–MOF nanocomposites as potential catalysts for HER, along with their different synthesis methodologies, structural characteris...
The electrochemical carbon dioxide reduction reaction (CO2RR) has emerged as a promising approach to addressing global energy and environmental challenges. Alloys are of particular importance in these applications due to their unique chemical and phy...
The preparation of electrocatalysts with high performance for the ethanol oxidation reaction is vital for the large-scale commercialization of direct ethanol fuel cells. Here, we successfully synthesized a high-performance electrocatalyst of a AuPd a...
Motivated by the prominent catalytic performance and durability of nanoalloy catalysts, the Pd-based bimetallic nanoalloy catalysts were prepared using an aqueous reduction method. The Fe-Pd bimetallic nanoalloy catalyst (nano-Fe/Pd) demonstrated 98....
In order to explore novel light-weight Co-Nb-based superalloys with excellent performance, we studied the effects of alloying elements including Sc, Ti, V, Cr, Mn, Fe, Ni, Y, Zr, Mo, Tc, Ru, Rh, Pd, Hf, Ta, W, Re, Os, Ir and Pt on the structural stab...
Nanoporous Pd (np-Pd) was prepared by co-sputtering Pd-Ni alloy films onto Si substrates, followed by chemical dealloying with sulfuric acid. X-ray diffractometry and chemical analysis were used to track the extent of dealloying. The np-Pd structure...
There has been considerable technological interest in high-entropy alloys (HEAs) since the initial publications on the topic appeared in 2004. However, only several of the alloys investigated are truly single-phase solid solution compositions. These...
The formic acid oxidation reaction (FAOR) represents an important class of small organic molecule oxidation and is central to the practical application of fuel cells. In this study, we report the fabrication of Ir(IV)-doped PdAg alloy nanodendrites w...
Electrocatalytic reduction of carbon dioxide to produce usable products and fuels such as alkanes, alkenes, and alcohols, is a very promising strategy. Recent experiments have witnessed great advances in precisely controlling the synthesis of single...
In this work, AuPd alloy palygorskite based Pal-NH2@AuPd nano-catalysts were prepared and used as catalysts for the reduction of nitroarenes and dyes at room temperature. The surface of palygorskite (Pal) was first modified with 3-aminpropyltriethoxy...
The deterioration of hydrogen charging performances resulting from the surface chemical action of electrophilic gases such as CO2 is one of the prevailing drawbacks of TiMn1.52 materials. In this study, we report the effect of autocatalytic Pd deposi...
Ammonia (NH3) represents a promising zero-emission fuel in hydrogen fuel cells. Membrane reactors for NH3 decomposition based on Pd-alloys have demonstrated high NH3 conversion, high hydrogen diffusivity, and high hydrogen selectivity, which allows f...
Electrochemical CO2 reduction to produce formate ions has studied for the sustainable carbon cycle. Mercury in the liquid state is known to be an active metallic component to selectively convert CO2 to formate ions, but it is not scalable to use as a...
In this article, the behavior of various Pd ensembles on the PdAg(111) surfaces was systematically investigated for oxygen reduction reaction (ORR) intermediates using density functional theory (DFT) simulation. The Pd monomer on the PdAg(111) surfac...
The effect of support on the performance of Pd1Ag10/Al2O3 and Pd1Ag10/CeO2–ZrO2 catalysts in the selective hydrogenation of diphenylacetylene (DPA) was studied. Characterization of the catalyst by DRIFTS-CO and HRTEM revealed the formation of a...
The synergic effects of activated carbon and transition metals on the hydrogenation characteristics of commercial ZK60 magnesium alloy were investigated. Severe plastic deformation was performed using equal-channel angular pressing with an internal d...
The photocatalytic conversion of CO2 to fuels using solar energy presents meaningful potential in the mitigation of global warming, solar energy conversion, and fuel production. Photothermal catalysis is one promising approach to convert chemically i...
Ni/Pd co-modified graphene hydrogen storage materials were successfully prepared by a solvothermal method using NiCl2·6H2O and Pd(OAc)2 and reduced graphene oxide (rGO). By adjusting the hydrothermal temperature, Pd–Ni is successfully al...
When a severe plastic deformation (SPD) process is performed at high temperatures, it becomes more versatile. Designed originally for the bulk nanoconstruction of hard-to-deform alloys, high-speed high-pressure torsion (HSHPT) is an SPD method used i...
Significant improvement of the catalytic activity of palladium-based catalysts toward carbon monoxide (CO) oxidation reaction has been achieved through alloying and using different support materials. This work demonstrates the promoting effects of th...
A laminated Pd-Cu alloy/C/Nafion multilayer was prepared to sense O2 atmosphere in a metal-air structure. As a matrix, palladium was doped with various amounts of copper to conduct a preliminary test with optimum response, and four compositions, Pd,...
The activation and catalytic performance of two representative Zr-containing intermetallic systems, namely Cu-Zr and Pd-Zr, have been comparatively studied operando using methanol steam reforming (MSR) as test reaction. Using an inverse surface scien...
X-ray absorption fine structure (XAFS) spectroscopy, temperature-programmed reduction (TPR), and temperature-programmed hydride decomposition (TPHD) were employed to elucidate the structures of a series of PdRe/Al2O3 bimetallic catalysts for the sele...
The magnetic properties and the atomic scale morphology of bimetallic two-dimensional nanoislands, epitaxially grown on fcc(111) metal surfaces, have been studied by means of Magneto-Optical Kerr Effect and Scanning Tunneling Microscopy. We investiga...
Electrochemical CO2 reduction reactions can lead to high value-added chemical and materials production while helping decrease anthropogenic CO2 emissions. Copper metal clusters can reduce CO2 to more than thirty different hydrocarbons and oxygenates...
Gold–palladium (Au–Pd) bimetallic nanostructures with engineered plasmon-enhanced activity sustainably drive energy-intensive chemical reactions at low temperatures with solar simulated light. A series of alloy and core–shell Au–Pd nanoparticles (NPs...
A combination of analytic tools and electrochemical testing was employed to study the contributions of Palladium (Pd) in a Zr-based AB2 metal hydride alloy (Ti12Zr22.8V10 Cr7.5Mn8.1Co7Ni32.2Al0.4). Pd enters the A-site of both the C14 and C15 Laves p...
of 3