We describe a method to enhance power conversion efficiency (PCE) of MAPbI3 perovskite solar cell by inserting a FAPbX3 perovskite quantum dots (QD-FAPbX3) layer. The MAPbI3 and QD-FAPbX3 layers were prepared using a simple, rapid spin-coating method...
The power conversion efficiency (PCE) of an Ag/spiro-OMeTAD/CH3NH3PbI3 (MAPbI3)/PCBM/mesoporous TiO2/compact TiO2/FTO planar solar cell with different annealing temperatures of PbI2 and MAPbI3 films was investigated in this study. The morphology cont...
One of the most amazing photovoltaic technologies for the future is the organic–inorganic lead halide perovskite solar cell, which exhibits excellent power conversion efficiency (PCE) and can be produced using a straightforward solution technique. To...
In this study, various factors affecting the efficiency of the MAPbI3 perovskite solar cell (PSC) were analyzed using the SCAPS-1D simulation program. The basic device analyzed in this study had a structure of ITO/TiO2/MAPbI3/Cu2O/Au. The thickness o...
Low-temperature, solution-processed, highly efficient hybrid organic/inorganic perovskite planar heterojunction solar cells were fabricated by incorporating reactive crystalline titania (h-TAc) into MAPbI3 layers. The h-TAc was prepared by the sol-ge...
A systematic SCAPS-1D simulation was performed to evaluate the effects of charge-transport-layer selection, MAPbI3 crystal phase, TiO2 modification, and key device parameters on the photovoltaic performance of MAPbI3-based perovskite solar cells. Twe...
This study determines the effects of annealing treatment on the structure and the optical and electronic behaviors of the mixed (FAPbI3)1−x(MAPbBr3)x perovskite system. The experimental results reveal that (FAPbI3)1−x(MAPbBr3)x (x ~ 0.2) is an effect...
In this study, four kinds of structures—[6,6]-phenyl-C61-butyric acid methyl ester (PCBM), PCBM/fullerene (C60), C60/bathocuproine (BCP), and PCBM/C60/BCP—were used as electron transport layers, and the structure, and optical and electronic behaviors...
In order to promote power conversion efficiency and reduce energy loss, we propose a perovskite solar cell based on cylindrical MAPbI3 microstructure composed of a MAPbI3 perovskite layer and a hole transport layer (HTL) composed of PEDOT:PSS. Accord...
We have investigated the effects of the methylammonium bromide (MABr) content of the precursor solution on the properties of wide-bandgap methylammonium lead tribromide (MAPbBr3) perovskite solar cells (PSCs). In addition, the anti-solvent process fo...
In this work, a MAPbBr3 quantum dot (QD-MAPbBr3) layer was prepared by a simple and rapid method. Octylammonium bromide (OABr) gives the MAPbBr3 better exciton binding energy, good surface morphology, and stability. To form a nanocrystalline thin fil...
This study investigates fully printed methylamine vapour-treated methylammonium lead iodide (MAPbI3) hole transport layer (HTL)-free perovskite solar cells (PSCs) with a carbon electrode. We describe a method that can be used to deposit MAPbI3 films...
In this work, guanidinium (GA+) was doped into methylammonium lead triiodide (MAPbI3) perovskite film to fabricate perovskite solar cells (PSCs). To determine the optimal formulation of the resulting guanidinium-doped MAPbI3 ((GA)x(MA)1−xPbI3)...
Perovskite thin films directly impact solar cell properties, making defect reduction crucial in perovskite solar cell research. In our study, we used perovskite quantum dots in the anti-solvent to act as nucleation centers in MAPbI3 thin films. These...
Perovskite solar cells (PSC) are currently exhibiting reproducible high efficiency, low-cost manufacturing, and scalable electron transport layers (ETL), which are becoming increasingly important. The application of photonic crystals (PC) on solar ce...
We demonstrate a method to enhance the power conversion efficiency (PCE) of MAPbI3 perovskite solar cells through localized surface plasmon (LSP) coupling with gold nanoparticles:CsPbBr3 hybrid perovskite quantum dots (AuNPs:QD-CsPbBr3). The plasmoni...
Materials retracts the article, “Bi and Sn Doping Improved the Structural, Optical and Photovoltaic Properties of MAPbI3-Based Perovskite Solar Cells” [...]
Methylammonium lead triiodide (CH3NH3PbI3/MAPbI3) is the most intensively explored perovskite light-absorbing material for hybrid organic–inorganic perovskite photovoltaics due to its unique optoelectronic properties and advantages. This includes tun...
A competitive new technology, organic metallic halide perovskite solar cells feature a wide working area, low manufacturing costs, a long lifespan, and a significant amount of large efficacy of power conversion (PCE). The spin-coating technique was u...
Thermal evaporation is a very successful and widely adopted coating technique for the deposition of organic and inorganic materials on rough and textured surfaces and over large areas. Indeed, this technique is extensively used in the semiconductor i...
Mixed halide perovskites can be tuned for bandgap, but they are prone to thermal defect deterioration that is difficult to evaluate throughout the whole stoichiometry range. Here, we investigate the relationship between Br composition, trap density,...
This work presents mixed (FAPbI3)1−x(MAPbBr3)x perovskite films with various composition ratios, x (x = 0–1), which are formed using the spin coating method. The structural, optical, and electronic behaviors of the mixed (FAPbI3)1−x(MAPbBr3)x perovsk...
We prepared 1% Bi- and (0, 0.5%, 1% and 1.5%) Sb- co-doped MAPbBr3 films by a sol-gel spin coating technique. For the first time, the detailed structural properties including grain size, dislocation line density, d-spacing, lattice parameters, and vo...
Perovskite solar cells have attracted great attention in recent years, due to their high conversion efficiency and solution-processable fabrication. However, most of the solar cells with high efficiency in the literature are prepared employing TiO2 a...
Blending perovskite with different cations has been successful in improving performance of perovskite solar cells, but the complex pathway of perovskite crystal formation remains a mystery, hindering its further development. In this paper, the detail...
Although perovskite solar cells have achieved excellent photoelectric conversion efficiencies, there are still some shortcomings, such as defects inside and at the interface as well as energy level dislocation, which may lead to non-radiative recombi...
The Coatings Editorial Office retracts the article entitled “Improving the Structural, Optical and Photovoltaic Properties of Sb- and Bi- Co-Doped MAPbBr3 Perovskite Solar Cell” [...]
The majority of high-performance perovskite and polymer solar cells consist of a TiO2 electron transport layer (ETL) processed at a high temperature (>450 °C). Here, we demonstrate that low-temperature (80 °C) ETL thin film of TiOx:Zn1&min...
The passivation engineering of the hole transport layer in perovskite solar cells (PSCs) has significantly decreased carrier accumulation and open circuit voltage (Voc) loss, as well as energy band mismatching, thus achieving the goal of high-power c...
Sn-based perovskites offer lower lead content but face a major challenge: Sn2+ oxidizes readily, which has led most research groups to use gloveboxes and chemical additives during processing. Here, we investigate whether precursor molarity alone can...
Three dimensional (3D) perovskite solar cells (PSCs) are a promising candidate for third-generation photovoltaics (PV) technology, which aims to produce efficient photon conversion devices to electricity using low-cost fabrication processes. Hybrid o...
Highly reproducible mesoscopic perovskite solar cells (PSCs) can be fabricated using two-step sequential deposition of organo-lead halide (perovskite) active layer. However, differences in the processing conditions of individual layers which are subs...
This study improved quality of CH3NH3PbI3 (MAPbI3) perovskite films by delaying thermal annealing in the spin coating process and introducing KI and I2 to prepare MAPbI3 films that were low in defects for high-efficiency perovskite solar cells. The i...
Halide perovskites-based solar cells are drawing significant attention due to their high efficiency, versatility, and affordable processing. Hence, halide perovskite solar cells have great potential to be commercialized. However, the halide perovskit...
Halide perovskite based solar cells (PSC’s) have shown tremendous potential based on its facile fabrication technique, and the low cost of perovskite thin film formation with efficiency passing through an unmatched growth in recent years. High...
The commercialization of perovskite solar cells is hindered by the poor thermal stability of organic–inorganic hybrid perovskite materials. Herein, we demonstrate that crystalline thermoplastic polymer additives, such as a mixture of polyethyle...
Many attempts have been made to stabilize α-phase formamidinium lead iodide (α-FAPbI3) using mixed cations or anions with MA+, FA+, Br− and I−. A representative method is to stably produce α-FAPbI3 by adding methylammonium lead (MAPbBr3) to the light...
Fabrication and characterization based on experimental results for methylammonium lead iodide (MAPbI3) perovskite solar cells using chemical-substituted metal phthalocyanines (MPc) and naphthalocyanines (MNc) as hole-transport materials have been per...
Since perovskite materials are currently mostly used in the active layer of solar cells, how to maximize the conversion efficiency of the active layer is the most urgent problem at present. In this regard, the extremely low voltage loss and tunable e...
A Pb-free FASnI3 perovskite solar cell improved by using Cu2O/ZnO as two-dimensional-based hole/electron transport nanolayers has been proposed and studied by using a SCAPS-1D solar simulator. To calibrate our study, at first, an FTO/ZnO/MAPbI3/Cu2O/...
Organic–inorganic halide perovskite solar cells (PSCs) have excellent chemical, electronic, and optical properties, making them attractive next-generation thin-film solar cells. Typical PSCs were fabricated with a perovskite absorber layer betw...
Different perovskite materials, such as methylammonium lead triiodide MAPbI3, exhibit many outstanding and desirable properties in solar energy harvesting. In this paper, the enhancement of perovskite solar cells’ both optical and electrical ch...
Perovskite solar cells have exhibited astonishing photoelectric conversion efficiency and have shown a promising future owing to the tunable content and outstanding optoelectrical property of hybrid perovskite. However, the devices with planar archit...
Carbon-based hole transport material (HTM)-free perovskite solar cells have exhibited a promising commercialization prospect, attributed to their outstanding stability and low manufacturing cost. However, the serious charge recombination at the inter...
The morphology control of CH3NH3PbI3 (MAPbI3) thin-film is crucial for the high-efficiency perovskite solar cells, especially for their planar structure devices. Here, a feasible and effective post-treatment method is presented to improve the quality...
Perovskite solar cells (PSCs) have immense potential for high power conversion efficiency with an ease of fabrication procedure. The fundamental understanding of interfacial kinetics in PSCs is crucial for further improving of their photovoltaic perf...
Perovskite solar cells are attracting more and more attention due to their higher absorption and low cost. However, fabricating the perovskite film with high crystallinity and ideal morphology, which presents large-size and uniform particles with few...
Perovskite solar cells have become more and more attractive and competitive. However, their toxicity induced by the presence of lead and their rather low stability hinders their potential and future commercialization. Reducing lead content while impr...
Methylammonium lead iodide (MAPbI3) perovskite quantum dots (QDs) have become one of the most promising materials for optoelectronics. Understanding the dynamics of the charge transfer from MAPbI3 QDs to the charge transport layer (CTL) is critical f...
Solution methods remain the most popular means for the fabrication of hybrid halide perovskites. However, the solubility of hybrid perovskites has not yet been quantitively investigated. In this study, we present accurate solubility data for MAPbI3,...
of 3