The relative contents of Cu+ and Cu2+ in solutions of anhydrous Nieuwland catalyst and CuCl2-added anhydrous Nieuwland catalyst were detected by X-ray photoelectron spectroscopy (XPS). Results indicated that Cu+ could be transformed into Cu2+ during...
A pellet-forming as-catalyst, CuO/Al2O3, was prepared by the precipitation–tablet molding method and characterized by the Brunner–Emmet–Teller (BET), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and scanning elec...
The hydrogenation of methyl formate to methanol is considered one of the most effective methods for recycling methyl formate products. We recently developed a highly efficient and cost-effective Cu-SiO2 catalyst using the ammonia-evaporation (AE) met...
Heterogeneous catalysts play a dual role in transesterification due to their advantages of being separable and reusable. In recent years, heterogeneous catalysts derived from renewable resources have received more attention. In this paper, the produc...
Cu2Y2O5 perovskite was reduced at different temperatures under H2 atmosphere to prepare two Cu-Y2O3 catalysts. The results of the activity test indicated that the Cu-Y2O3 catalyst after H2-reduction at 500 °C (RCYO-500) exhibited the best perform...
Water can cause the growth and oxidation of Cu nanoparticles on the surface of Cu-based catalysts, leading to their deactivation. However, during methanol synthesis process from syngas on Cu-based catalysts, water is inevitably produced as a by-produ...
The non-oxidative dehydrogenation of ethanol into acetaldehyde is one of the efficient solutions for biomass upgrading. In this work, a series of copper catalysts supported on MgO with different Cu loadings ranging from 2.5% to 20% were prepared by a...
Supported molybdenum carbide (yMo2C/M41) and Cu-promoted molybdenum carbide, using a mechanical mixing and co-impregnation method (xCuyMo2C/M41-M and xCuyMo2C/M41-I) on a mesoporous molecular sieve MCM-41, were prepared by temperature-programmed carb...
Magnetic inducement was applied during metal loading to enhance Cu-Zn catalysts for methanol steam reforming in the temperature range of 200–300 °C. The supports used in this study were the γ-Al2O3 support and CeO2-Al2O3 supports prepared under diffe...
The selective hydrogenation of the biomass platform molecule furfural (FAL) to produce furfuryl alcohol (FA) is of great significance to alleviate the energy crisis. Cu-based catalysts are the most commonly used catalysts, and their catalytic perform...
The activity and recyclability of Cu-MOF-74 as a catalyst was studied for the ligand-free C–O cross-coupling reaction of 4-nitrobenzaldehyde (NB) with phenol (Ph) to form 4-formyldiphenyl ether (FDE). Cu-MOF-74 is characterized by having unsaturated...
The possibility of wastewater treatment and electricity production using a microbial fuel cell with Cu–B alloy as the cathode catalyst is presented in this paper. Our research covered the catalyst preparation; measurements of the electroless po...
γ-Valerolactone (GVL) is a promising bio-based platform molecule with significant potential for energy applications. The production of GVL via biomass-based levulinic acid (LA) is an important reaction. To enhance the conversion and selectivity...
Promoted Cu/ZnO catalyst was synthesized on Al2O3-ZrO2 support. Effects of calcination conditions on the catalytic performance in a CO2 hydrogenation reaction were studied systematically using the response surface methodology (RSM). The application o...
Para-dioxanone, a typical monomer for high-performance biomedical polymers, is generally obtained from the catalytic dehydrogenation of diethylene glycol. In this work, Cu/SiO2 catalysts were prepared by two different methods and applied in diethylen...
In this work, combined experimental and modeling techniques were used to understand the bimetallic catalyst formation of Cu and Fe. The first part of this study aims to address this gap by employing analytical techniques such as X-ray diffraction (XR...
The oxygen reduction reaction (ORR) is a key process for the operation of fuel cells. To accelerate the sluggish kinetics of ORR, a wide range of catalysts have been proposed and tested. In this work, a nano-dispersed copper-impregnated platinum cata...
The preparation of heterogeneous Fenton catalysts with both adsorption and catalytic properties has become an effective strategy for the treatment of refractory organic wastewater. In this work, 4A-Fe@Cu bimetallic Fenton catalysts with a three-dimen...
The complete conversion of NOx to harmless N2 without N2O formation is crucial for the control of air pollution, especially at low temperatures. Cu-based catalysts are promising materials due to their low cost and high activity in NO dissociation, ev...
Carbon dioxide is naturally present in the Earth’s atmosphere and plays a role in regulating and balancing the planet’s temperature. However, due to various human activities, the amount of carbon dioxide is increasing beyond safe limits,...
This paper presents the kinetics of methanol synthesis from carbon dioxide and hydrogen over a Cu/Zn/Zr/Ga catalyst. Kinetic studies were carried out in a continuous-flow fixed-bed reactor in a temperature range from 433 to 513 K, pressures from 3 to...
Cu/ZnO/Al2O3 catalyst with the addition of tri-promoters (Mn/Nb/Zr) was investigated with respect to their catalytic activity and stability in a prolonged reaction duration in methanol synthesis. Spent catalysts were characterized using N2 adsorption...
Cu/ZnO catalysts were synthesized via an impregnation method on an Al2O3-ZrO2 support and modified by the addition of manganese and niobium as promoters. The effect of the selected promoters on the physicochemical properties and performance toward th...
A silica-supported copper (Cu/SiO2) catalyst containing highly dispersed Cu nanoparticles was prepared via a crown-ether-assisted impregnation method. A 12-crown-4-ether-assisted Cu/SiO2 catalyst outperformed several Cu/SiO2 catalysts prepared with v...
Dielectric barrier discharge (DBD) could generate non-thermal plasma (NTP) with the advantage of fast reactivity and high energy under atmosphere pressure and low-temperature. The presented work investigated the selective catalytic reduction (SCR) of...
The catalytic conversion of carbon dioxide to methanol is significantly important both practically and scientifically for the reduction in CO2 emissions. Furthermore, it can partially address the issue of human reliance on non-renewable resources. Th...
The glycerol hydrogenolysis to produce 1,2-propanediol without using externally supplied hydrogen was investigated using methanol present in crude glycerol to provide in situ hydrogen via its steam reforming reaction. This paper focuses on the promot...
The present study pays attention to biogas dry reforming for the purpose of producing H2. It is known that biogas contains approximately 40 vol% CO2, causing a decrease in the efficiency of power generation due to its lower heating value compared to...
Novel Fenton-like catalyst HKUST-1(Cu)/MoS2-3-C with a non-equilibrium-state surface was constructed for selective degradation of phenolic contaminants. Electron-polarized distribution facilitated the formation of σ-Cu-ligand between electron-p...
Production of green chemicals using a biomass derived feedstock is of current interest. Among the processes, the hydrogenolysis of glycerol to 1,2-propanediol (1,2-PD) using externally supplied molecular hydrogen has been studied quite extensively. T...
Several Cu and Ni-based catalysts were synthetized over Ce-based supports, either pure or mixed with different amounts of alumina (1:2 and 1:3 mol/mol). Different metal loadings (10–40 wt%) and preparation methods (wet impregnation, co-precipit...
A method for preparation of a new stable Cu(I) catalyst supported on weakly acidic polyacrylate resin without additional stabilizing ligands is described. A simple and efficient methodology for Ullmann Cu(I) catalyzed C-N cross coupling reactions usi...
Due to the growth of biodiesel production, utilization of the glycerol formed as a by-product is still of considerable importance. This study is devoted to a novel approach for glycerol hydrogenolysis with use of in situ generated Cu-ZnO catalysts. T...
In the present study, a series of monometallic Cu/SiO2-Al2O3 catalysts exhibited immense potential in the hydroprocessing of oleic acid to produce jet-fuel range hydrocarbons. The synergistic effect of Fe on the monometallic Cu/SiO2-Al2O3 catalysts o...
Cu-based catalysts, modified by gallium addition via the stepwise co-precipitation method, were studied for the liquid phase hydrogenation of hydroxypivalaldehyde (HPA) to neopentyl glycol (NPG). Through physico-chemical techniques, the effects of ga...
The steel manufacturing industry is a major source of global air pollution, with sintering processes contributing over 70% of emissions, primarily carbon monoxide (CO), a significant uncontrolled pollutant. This study explores Mn-Cu bimetallic cataly...
Recyclable PdCu single atom alloys supported on Al2O3 were applied to the selective hydrogenation of crotonaldehyde to elucidate the minimum number of Pd atoms required to facilitate the sustainable transformation of an α,β-unsaturated car...
CO2 hydrogenation to methanol was conducted using a set of activated carbon-supported Cu/ZnO/Al2O3 catalysts (CCZA) prepared by an incipient wetness impregnation approach. The effect of the Cu/Al ratio on the physicochemical properties of the catalys...
Cyclohexene esterification–hydrogenation for the efficient production of cyclohexanol will be commercialized for the first time. Cu/MgO/Al2O3 catalysts with layered double hydroxides as precursors were developed, and the effect of altering the...
Higher alcohol synthesis through the Fischer–Tropsch (F–T) process was considered a promising route for the efficient utilization of fossil resources could be achieved. The CuCo catalysts were proven to be efficient candidates and attract...
A group of CuAl catalysts were synthesized with a Cu/Al molar ratio of 1:1 using different preparation methods: coprecipitation, surfactant assisted coprecipitation, polymeric precursor, and self-combustion and then screened for the selective dehydra...
Carbon-doped nanostructured CuMo-based photocatalysts were prepared by solvothermal synthesis. Two thermal treatments—oxidative and inert atmosphere—were used for the synthesis of the catalysts, and the influence of spherical carbon struc...
Cu-containing layered double hydroxides (LDHs) were synthesized by a co-precipitation method at different reaction conditions, such as aging time, pH, precipitation rate and synthesis temperature. The effect of these parameters on the structure and c...
Binary Ni–Cu heterogeneous catalysts are known to demonstrate excellent activity in conventional hydrogenation of phenolic compounds, and Cu addition facilitates hydrodeoxygenation (HDO). In this study, we aimed to show the effect of Cu on the...
Cu–Zn/γ–Al2O3 catalysts were prepared by the impregnation method. Catalytic activity was evaluated for N2O decomposition in a fixed bed reactor. The fresh and used catalysts were characterized by several techniques such as BET surface area, X-ray dif...
The process of thermocatalytic conversion of pine ethanol lignin in supercritical ethanol was studied over NiCu/SiO2 and NiCuMo/SiO2 catalysts bearing 8.8 and 11.7 wt.% of Mo. The structure and composition of ethanol lignin and the products of its th...
In this work, the synthesis of bimetallic Ag and Cu particles on carbon vulcan (AgCu/C) is reported, synthesized by a simple galvanic displacement method using citrate tribasic hydrate as a co-reducing agent and a commercial material based on Cu/C as...
Renewable methanol, obtained from CO2 and hydrogen provided from renewable energy, was proposed to close the CO2 loop. In industry, methanol synthesis using the catalyst CuO/ZnO/Al2O3 occurs at a high pressure. We intend to make certain modification...
Selective catalytic reduction of NOx by CO (CO-SCR) to both N2 and CO2 is a promising way to simultaneously remove two harmful gases, CO and NOx, in automobile and factory exhaust gases. The development of efficient catalysts is the key challenge for...
Unannealed CuNiMoP electrocatalyst was found active in electrochemical oxidation of glycerol, providing over 60% conversion without optimization. Prompted by this result, the same catalyst was investigated for the thermochemical oxidation of glycerol...
of 38