A polyurethane/Laponite/graphene transparent coating with high surface hardness, obtained by dispersing the Laponite–graphene oxide (Lap-GO) in polyurethane for UV reduction, is reported. Lap-GO improves the hardness of the coating, where Lapon...
Integrating strong mechanical properties and excellent optical properties for self-healing materials is challenging in both academia and industry. Robust self-healing polyurethane elastomers are expected to have superior mechanical properties, transp...
Waterborne polyurethane dispersions can be designed to generate highly functional and environmentally friendly polymer systems. The use of water as the main dispersion medium is very advantageous for the environment and the introduction of linear and...
Whether modified poplar can obtain a qualified or even excellent finishing effect on European and American furniture is worthy of deep study. To evaluate whether the conventional non-transparent coating process is suitable for modified poplar, a mult...
New transparent thermoplastic polyurethane elastomers (TPURs) with the hard-segment content of ≈50 mass % were synthesized by one-step melt polyaddition of 1,1′-methanediylbis(4-isocyanatocyclohexane), 2,2′-methylenebis[(4,1-phenylene)-methylenesulfa...
A polyurethane acrylate-based photosensitive resin system was developed for 405 nm DLP printing. The formulations were prepared by blending commercial urethane acrylate RT75A with TPO-L, BBOT, and one of four reactive diluents (ACMO, IBOMA, TPGDA, or...
Electronic skin (E-skin) is increasingly utilized in modern society, yet current E-skin technology suffers from issues, such as opacity, hardness, and fragility. To address these challenges, a novel E-skin was developed using polyurethane (PU) as the...
A series of CO2-based thermoplastic polyurethanes (TPUs) were prepared using CO2-based poly(polycarbonate) diol (PPCDL), 4,4′-methylenebis (cyclohexyl isocyanate) (HMDI), and polypropylene glycol (PPG and 1,4-butanediol (BDO) as the raw materia...
Carbonate-type macrodiols synthesized by base-catalyzed polycondensation of co-diols and dimethyl carbonate as an environmentally-friendly route were subsequently utilized for the preparation of transparent and self-healable thermoplastic polyurethan...
A europium complex with double bonds was synthesized with crotonic acid as the ligand and a europium ion as the center ion. Then, the obtained europium complex was added to synthesized poly(urethane-acrylate) macromonomers to prepare the bonded polyu...
Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) has the merits of high electrical conductivity and solution processability, and can be dispersed in water. To improve the stretchability of PEDOT:PSS-based transparent electrode film...
Solar roads are transportation infrastructures able both to generate electricity thanks to solar cells placed under a semi-transparent layer and to ensure heavy traffic circulation. In this paper, a novel transparent top layer made of glass aggregate...
Highly transparent polyisocyanurate–polyurethane (PUR–PIR) aerogels were synthesized, and their optical properties were studied in detail. After determining the density and structural parameters of the manufactured materials, we analyzed...
Hollow nano-TiO2 spheres (HNTSs) with shell coating ratios of 28.62%, 29.33%, 30.72%, 36.31%, and 38.17% were prepared by a sol–gel method. The novelty of this work lies in the use of the shell coating ratio as a tunable design parameter to bal...
In this work, polyurethane/fluorinated acrylic co-polymer/silicon dioxide (PU/FAP/SiO2) hybrid superhydrophobic coatings were fabricated on glass substrates via a simple one-step coating process. The effects of each coating component on the coating p...
Thermoplastic polyurethanes (TPUs) are versatile polymers presenting a broad range of properties as a result of their countless combination of raw materials—in essence, isocyanates, polyols, and chain extenders. This study highlights the effect...
Photochromic polymers have been studied as rewritable systems for optical elements with tunable transparency in the visible and refractive index in the NIR. Six diarylethene monomers have been synthesized to give thin films of photochromic polyuretha...
A family of transparent polyisocyanurate-polyurethane (PUR-PIR) aerogels with an interesting combination of physical properties were synthesized. First, their textural properties were analyzed aiming to study catalyst influence on the final porous st...
This paper deals with the influence of dark and light exposure on the colour change of a transparent two-component polyurethane surface finish. The surface finish with polyacrylic and aldehyde resin was applied to the surfaces of untreated and hydrot...
The surface modified hydrophilic zinc sulfide nano powder was prepared by hydrothermal method, and the corresponding zinc sulfide/polyurethane organic-inorganic composite transparent coating via in-situ polymerization. The structure of ZnS Nanopartic...
New segmented poly(thiourethane-urethane)s (SPTURs) were synthesized by the reaction of 1,1′-methanediylbis (4-isocyanatocyclohexane) (Desmodur W®, HMDI) and poly(ε-caprolactone)diol (PCL) and (methanediyldibenzene-4,1-diyl)dimethan...
In this work, we studied the influence of the geometry and degree of filling of glass dispersed particles on the optical and mechanical properties of flexible high-transmission composites, based on thermoplastic polyurethane. Glass spheres, glass fla...
Paper cultural heritages are valuable historical records and also abound in cultural resources. Due to its organic property, paper is susceptible to aging, destruction by environmental pollution and human factors. At present, many countries in the wo...
To develop self-healing polyurethane materials with high transparency and superior mechanical performance, in this work, the poly(thiourethane) elastomers were prepared by incorporating the dynamic thiourethane bonds via thiol–isocyanate click...
Silver nanowires (AgNWs), having excellent electrical conductivity, transparency, and flexibility in polymer composites, are reliable options for developing various sensors. As transparent conductive electrodes (TCEs), AgNWs are applied in optoelectr...
Waterborne polyurethane-acrylate (WPUA) grafted with polyurethane was prepared to improve the film-forming ability of hard-type acrylic latex. To balance the film-formation ability and hardness, the WPUA latex was designed with a hard core (polyacryl...
A flexible polyurethane elastomer (PUE) is studied, and the improved impact-resistant performance is revealed. Compressive stress–strain curves over a wide loading rate range were derived. Under static loading, the rubbery-like characteristics...
The protection and decorative value of raw wood-based boards with various coatings can be enhanced during the service life of furniture using surface treatment techniques. In this study, selected transparent, pigmented polyurethane email finish and t...
High-transparency soluble polyimide with COOH and fluorine functional groups and TiO2-SiO2 composite inorganic nanoparticles with high dielectric constants were synthesized in this study. The polyimide and inorganic composite nanoparticles were furth...
Fluorescent and flame-retardant two-component waterborne polyurethane coatings were synthesized using 1,5-dihydroxy naphthalene, a halogen-free polyphosphate and a hydrophilic curing agent, and their properties were systematically characterized. The...
We hypothesize that plasma treatments that increase the adhesion and penetration of transparent water, and solvent-borne polyurethane coatings into black spruce wood will improve the performance of coated wood exposed to accelerated weathering. We te...
Surface roughness and low surface energy are key elements for the artificial preparation of biomimetic superhydrophobic materials. However, the presence of micro-/nanostructures and the corresponding increase in roughness can increase light scatterin...
At present, the consumption of polyurethane is huge in various industries. As a result, it has become a research hotspot to use environmentally friendly and renewable bio-based raw materials (instead of petroleum-based raw materials) to prepare polyu...
Alkyd resins are among the most common coatings used for exterior wood joinery. In Romania, solvent-borne alkyd coatings are widely used to finish wood. The study aims to compare the performance after 7 years of outdoor exposure of two types of alkyd...
Invisible orthodontic aligners (IOAs) have been introduced in the orthodontic field as an innovative alternative for fixed brackets, in relation to their ability to be easily inserted/removed from the oral cavity without affecting the chewing ability...
This paper presents the formulation, inkjet printing, and vacuum forming of a conductive and stretchable polymer, poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), ink on a stretchable and transparent thermoplastic polyurethane (TPU...
Waterborne polyurethanes (WBPUs) with relatively high biobased content (up to 43.7%) were synthesized, aiming at their use as coatings for metals and woods. The study was performed on self-standing films obtained from anionic polyurethane water dispe...
This work introduces an ultraviolet (UV)-curable elastomer through the co-polymerization of aliphatic polyurethane acrylate and hydroxypropyl acrylate via UV irradiation. The UV-curable elastomer presents superior mechanical properties (elongation at...
Optical plastics possess excellent optical and mechanical properties but are limited by poor surface hardness and scratch resistance. Herein, UV-curable organic–inorganic hybrid coatings were developed to enhance scratch resistance while mainta...
This work evaluates the effects of accelerated aging on the discolouration of surface-treated spruce wood and oak wood coated with solvent-based polyurethane lacquers, and surface-treated spruce wood coated with water-based transparent coating system...
An isocyanate with trimethoxysilane groups at the side chains (IPDI-M) was synthesized via an addition between the mercaptopropyl trimethoxysilane groups (MPTMS) and IPDI tripolymer (IPDI-T). Then, silane grafted isocyanate as the functional hard seg...
The pencil hardness of a two-component polyurethane coating was improved by adding halloysite nanotubes to the recipe at a weight fraction of less than 10%. The pencil hardness was around F for the unfilled coating and increased to around 2H upon fil...
Transparent conductive films (TCFs) have received much research attention in the area of aeronautical canopies. However, bad wear, corrosion resistance and weak erosion performance of TCFs dramatically limit their scalable application in the next-gen...
In recent years, robotic minimally invasive surgery has transformed many types of surgical procedures and improved their outcomes. Implementing effective haptic feedback into a teleoperated robotic surgical system presents a significant challenge due...
Though polyurethanes (PUs) are widely used in people’s daily lives, traditional PUs are generally fabricated from toxic (poly)isocyanates. Furthermore, (poly)isocyanates are commonly industrially prepared from a seriously toxic and injurious ch...
In this work, a thermoset ultraviolet (UV)-cured polyurethane-acrylate resin was doped with different chemically-modified graphene obtained from a commercial graphene oxide (GO): as-received GO, chemically reduced GO (rGO), GO functionalized with vin...
It is well known that ultraviolet (UV) and blue light cause a series of health problems and damages to polymer materials. Therefore, there are increasing demands for UV-blue light-shielding. Herein, a new type of iron-doped titania (Fe-TiO2) nanopart...
Introduction: Transparent orthodontic aligners have revolutionized dentistry and orthodontics since the 1990s, offering advantages over traditional fixed appliances in terms of hygiene, comfort, and aesthetics. With the increasing demand for invisibl...
Calcium carbonate (CaCO3) is a widely used inorganic filling pigment used in coatings, and it is known for its nontoxicity, odorlessness, and environmental friendliness. The application of CaCO3 as a filler can effectively reduce raw material costs,...
This paper deals with the influence of the type of transparent surface finish on the change of colour of the surfaces of native wood, and thermally treated wood, with saturated water vapour. In the experiment, alder, European beech, Paper birch, and...
of 2