- Article
The Mg–Gd–Y–Zn–Zr alloy containing a long period stacking ordered (LPSO) phase was subjected to multi-pass deformation by means of a multi-directional forging process, and the microstructure evolution and the influence of the...
The Mg–Gd–Y–Zn–Zr alloy containing a long period stacking ordered (LPSO) phase was subjected to multi-pass deformation by means of a multi-directional forging process, and the microstructure evolution and the influence of the...
The effects of (Zn + Mg) total content (9.6–11.7 wt.%) combined with multi-directional forging (MDF) on the microstructure and properties of high-strength Al–Zn–Mg–Cu alloys were systematically investigated. Our results demons...
Magnesium (Mg) and its alloys are currently the lightest structural metals in engineering applications, widely used in aerospace, defense technology, transportation and electronic 3C fields. Plastic deformation is a commonly used method to improve th...
As the lightest metallic structural material, magnesium alloys face a fundamental trade-off between strength and ductility, limiting their broader application. This study investigates a processing approach to overcome this limitation by systematicall...
In this study, a biodegradable Mg-Zn-Nd-Gd alloy was processed via multi-directional forging (MDF) to evaluate its microstructural evolution, mechanical performance, and corrosion behavior. Electron backscattered diffraction (EBSD) analysis was condu...
In current research, the effect of the multi-directional forging (MDF) process on the microstructure, texture, mechanical and electrical properties of AA-6063 under different heat treatment conditions at various MDF temperatures was studied. The anne...
This study systematically investigated the influence of multi-directional forging (MDF) on the microstructural evolution, hot deformation behavior, and tensile properties of a β-solidifying TiAl alloy. The initial lamellar microstructure of an as-cas...
In this paper, in order to improve the microstructure uniformity of an ultra-high strength martensitic steel with a strength greater than 2500 Mpa developed by multi-directional forging in the laboratory, a single-pass hot compression experiment with...
The hot deformation behavior and microstructure evolution of a 7.5 vol.% TiBw/near α-Ti composite with fine matrix microstructure were investigated under the deformation conditions in a temperature range of 800–950 °C and strain rate...
To further improve the mechanical properties of the as-cast 7.5 vol.% TiBw/Ti–6Al–2.5Sn–4Zr–0.7Mo–0.3Si composite, multi-directional forging (MDF) and subsequent heat treatments were carried out to adjust TiB whiskers (T...
Multidirectional isothermal forging (MDIF) was used on a Ti-44Al-4Nb-1.5Cr-0.5Mo-0.2B (at. %) alloy to obtain a crack-free pancake. The microstructural evolution, such as dynamic recovery and recrystallization behavior, were investigated using electr...
The study of powder metallurgy processing methods for titanium represents a promising avenue that can respond to a growing demand. This work reports the feasibility of direct powder forging (DPF) as a method to process large spherical Ti-6Al-4V powde...
This study investigates three processes of multidirectional forging (MDF), namely, closed MDF (CMDF), single-open MDF, and double-open MDF, by using a constitutive equation and a dynamic recrystallization model of hot deformation of the GH4169 supera...
In this study, the continuous evolution of the second-phase particles across as-cast, homogenization, multi-directional forging (MDF), and solution-aging treatment and their effect on tensile fracture behavior of 2219 aluminum alloys with different C...
The current work systematically investigated the microstructure, texture evolution, and mechanical properties of MDFed Mg-13Gd-4Y-2Zn-0.5Zr (wt%) alloy (GWZ) on the condition of high and low temperature cycle deformation. The high and low temperature...
This study refers to an analysis of the durability of forging tools applied in the second operation of producing a valve forging from the chromium–nickel steel, NC3015. Due to the extreme working conditions of the tools, caused by cyclic thermo...
The effect of isothermal multidirectional forging (IMF) on the microstructure evolution of a conventional Al–Mg-based alloy was studied in the strain range of 1.5 to 6.0, and in the temperature range of 200 to 500 °C. A mean grain size in t...
This research is devoted to the microstructure evolution and deformation behavior of the Al-1.2Mg-0.7Si-1.0Cu-0.1Sc-0.2Zr alloy during the isothermal multidirectional forging (MDF) in a large cumulative strain and temperature range. The structure inv...
The hollow axle is the key basic component of high-speed trains. How to realize its production with short process and high-quality precision plastic forming is the frontier of current research and a major problem to be solved. On the basis of analyzi...
The study aims to investigate the influence of fraction of coarse undeformed particles on the microstructure evolution and mechanical properties of alloys processed by isothermal multidirectional forging (MDF). For this purpose, Al-Mg-Ni-Sc-Zr-based...
A novel continuous process of severe plastic deformation (SPD) named continuous close die forging (CCDF) is presented. The CCDF process combines all favorite advances of multidirectional forging and other SPD methods, and it can be easily scaled up f...
Aluminum and its alloy magnetron sputtering targets, owing to their superior electrical/thermal conductivity and robust substrate adhesion, serve as critical materials in advanced electronics and information technologies. It is known that the microst...
The Fe-rich intermetallic phases have a broadly detrimental effect on the mechanical properties of Al–Cu alloy. In this paper, the continuous evolution of Fe-rich intermetallics and their effects on mechanical properties, especially the tensile...
Two Venetian types of swords coming from the “Luigi Marzoli” Arms Museum in Brescia were characterized in this study, to understand their manufacturing process and to gather information about their provenance. Both the blades and the hilts components...
Laser-directed energy deposition technology (LDED), a method for repairing worn agricultural machinery parts, is valued for its flexibility, efficiency, and economy. To improve the comprehensive quality of the parts repair layer and reduce the proces...
In this study, we fabricated Fe-25Ni-15Cr alloy rods via vacuum induction melting, electroslag remelting, forging, hot rolling, and annealing. We systemically investigated the influence of varying cold-drawing deformation levels (10–60%) on mic...
To explore room-temperature strengthening and high-temperature ductility, a lightweight novel Mg-1.85Gd-0.64Al-0.62Zn alloy was fabricated by innovative multidirectional forging and a hot-rolling technique. Microstructures and mechanical properties w...
Online handwritten signature verification is a crucial direction of research in the field of biometric recognition. Recently, many studies concerning online signature verification have attempted to improve performance using multi-feature fusion. Howe...
The large diameter metal shell component (LDMSC) is an important part of gas insulated (metal-enclosed) switchgear (GIS). The LDMSC with multi branches is filled with gas under certain pressure. The plastic forming process is an efficient approach to...
To accurately characterize the warm deformation behavior and workability of the 5A06 aluminum alloy, this study presents an innovative workflow that develops and systematically validates machine learning-assisted Johnson–Cook (ML-JC) frameworks...