To explore a highly conductive flexible platform, this study develops PIDF-BT@SWCNT by wrapping single-walled carbon nanotubes (SWCNTs) with a conjugated polymer, PIDF-BT, known for its effective doping properties. By evaluating the doping behaviors...
We have studied the effect of doping on the temperature performance of a split-well (SW) direct-phonon (DP) terahertz (THz) quantum-cascade laser (QCL) scheme supporting a clean three-level system. Achieving a system that is as close as possible to a...
In recent years, ternary organic photovoltaic cells (OPVs) have been dedicated to improving power conversion efficiency (PCE) by broadening optical absorption spectra. Ternary OPVs with different poly[thieno[3,2-b]thiophene-2,5-diyl-alt-4,9-bis(4-(2-...
A novel tunable Erbium-doped fiber ring laser (EDFRL) with a cascaded-chirped long-period fiber grating (C-CLPG) as a wavelength selection filter is proposed from the viewpoint of the sensor use, in which a variable optical attenuator (VOA) is employ...
Energy level interaction and electron concentration are crucial aspects that affect the response performance of quantum cascade detectors (QCDs). In this work, two different-structured array QCDs are prepared, and the detectivity reaches 109 cm&middo...
Mid-infrared (MIR) supercontinuum (SC) sources are critical for spectroscopy, biomedical imaging, and environmental monitoring. However, conventional generation methods based on free-space experiments using optical parametric amplifiers (OPAs) and di...
A stable, single, and dual-wavelength erbium-doped fiber laser (EDFL), based on two Mach–Zehnder interferometers (MZIs), arranged in a cascade configuration, was proposed for experimental purposes. Both MZIs were assembled by splicing a capilla...
An interference filter is designed by cascading two Mach-Zehnder interferometers (MZIs), which is then utilized in the construction of a wavelength interval adjustable dual-wavelength Erbium-doped fiber laser (EDFL). Each MZI consists of two 3 dB opt...
We demonstrated a straightforward approach to generate red and near-infrared laser emissions by a Raman-assisted four wave mixing (FWM) process in a nonlinear Yb-doped fiber amplifier, delivering 342 fs pulses of 241 nJ at 864 nm, 834 fs pulses of 21...
A narrow-linewidth eight-wavelength-switchable erbium-doped fiber laser is proposed, and its performance is demonstrated. A cascaded superimposed high-birefringence fiber Bragg grating is used to determine the lasing wavelengths. The combination of a...
A technique for direct study of the distribution of the applied voltage within a quantum cascade laser (QCL) has been developed. The detailed profile of the potential in the laser claddings and laser core region has been obtained by gradient scanning...
We report an all-solid-state continuous wave (CW) tunable orange laser based on cascaded single-pass sum-frequency generation with fundamental wavelengths at 1545.7 and 975.2 nm using two quasi-phase-matched (QPM) MgO-doped periodically poled lithium...
The precise determination of carrier concentration in doped semiconductor materials and nanostructures is of high importance. Many parameters of an operational device are dependent on the proper carrier concentration or its distribution in both the a...
Fiber laser sources operating near 2300 nm in the atmospheric transparency window are interesting for different applications, such as remote sensing, lidars, and others. The use of Tm-doped fiber lasers based on tellurite fibers is highly promising....
Transition metal-N-doped carbon has been demonstrated to mimic natural enzyme activity; in this study, cobalt–nitrogen co-doped carbon (Co-N-C) nanomaterial was developed, and it could be an oxidase mimic. Firstly, Co-N-C with oxidase-like acti...
In this work, the cascaded second-order spontaneous parametric down-conversion (SPDC) is considered to produce pure state photon triplets in periodically poled lithium niobite (PPLN) doped with 5% MgO. A set of parameters are optimized through calcul...
We report a continuous-wave high-output power and narrow-linewidth all-fiber laser at 1550 nm with the master oscillator power amplifier (MOPA) configuration. An all-fiber distributed feedback seed laser was boosted by three cascaded fiber amplifiers...
Cell pyroptosis has a reciprocal relationship with various cancer treatment modalities such as chemotherapy. However, the tumor microenvironment, characterized by hypoxia, substantially restricts the development and application of tumor therapies tha...
ZnO-based heterostructures are up-and-coming candidates for terahertz (THz) optoelectronic devices, largely owing to their innate material attributes. The significant ZnO LO-phonon energy plays a pivotal role in mitigating thermally induced LO-phonon...
Systematic doping by transition elements Fe, Co and Ni on each site of Ni2MnGa alloy reveal that in bulk material the increase in martensitic transformation temperature is usually accompanied by the decrease in ferromagnetic Curie temperature, and vi...
This work experimentally validates an improved Raman fiber laser, developed through cascade core variation splicing of optical fibers and the integration of fiber Bragg gratings. A continuous-wave Yb-doped fiber laser was used as the pump source, del...
The development of high-power laser sources at 2.3 µm is highly demanded for remote sensing and other applications. However, this wavelength is poorly covered by present-day lasers. To obtain 100 W class high-power radiation at 2.3 μm, we pr...
A high-power narrow-linewidth fiber laser with single-mode beam quality is experimentally demonstrated. By employing a cascaded phase modulation strategy, the stimulated Brillouin scattering (SBS) threshold of the laser is effectively increased from...
We propose and demonstrate a temperature and humidity sensor based on a fluorinated polyimide film and fiber Bragg grating. Moisture-induced film expansion or contraction causes an extra strain, which is transferred to the fiber Bragg grating and lea...
Insulated-gate bipolar transistor (IGBT) power modules suffer efficiency degradation at elevated operating junction temperatures. The thermal sensitivity of the collector–emitter saturation voltage (VCEsat) induces thermal stress imbalance, con...
AlGaAs/GaAs heterostructures are the base of many semiconductor devices. The fabrication of new types of devices demands heterostructures with special features, such as large total thickness (~20 μm), ultrathin layers (~1 nm), high repeatability (...
A single longitudinal mode (SLM) dual-wavelength switchable erbium-doped fiber laser (DW-EDFL) based on polarization-maintaining fiber Bragg grating Fabry–Perot cavity (PMFBG-FP) cascaded multiple sub-ring cavities (MSCs) is proposed. A PMFBG-F...
5-Hydroxymethylfurfural (HMF) is a versatile platform molecule with the potential to replace many fossil fuel derivatives. It can be obtained through the dehydration of carbohydrates. In this study, we present a simple and cost-effective microwave-as...
The limited availability of powerful, tunable, and reliable mid-infrared sources has historically prevented their widespread adoption in spectroscopy applications, even if most greenhouse gases’ fundamental absorption lines are found in this re...
We propose and demonstrate a tunable femtosecond electro-optic optical frequency comb by shaping a continuous-wave seed laser in an all-fiber configuration. The seed laser, operating at 1.5 μm, is first cascade-phase-modulated and subsequently de-...
We propose the use of an n-doped periodic AlN/GaN quantum cascade structure for the optical up-conversion of multiple near-infrared (near-IR) photons into deep-ultraviolet (deep-UV) radiation. Without applying an external bias voltage, the active reg...
Biomineralization consists of a complex cascade of phenomena generating hybrid nano-structured materials based on organic (e.g., polymer) and inorganic (e.g., hydroxyapatite) components. Biomineralization is a biomimetic process useful to produce hig...
Tuning the emission spectrum of both binary hybrids of poly (9,9′-di-n-octylfluorenyl-2,7-diyl) (PFO) with each poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) and poly[2-methoxy-5-(3,7-dimethyl-octyloxy)-1,4-phenylenevinylene] en...
The rapid growth of wireless technology has improved the network’s technology from 4G to 5G, with sub-6 GHz being the centre of attention as the primary communication spectrum band. To effectively benefit this exclusive network, the improvement...
We demonstrate the applications of tunnel junctions (TJs) for new concepts of monolithic nitride-based multicolor light emitting diode (LED) and laser diode (LD) stacks. The presented structures were grown by plasma-assisted molecular beam epitaxy (P...
Fluorides have a wide bandgap and therefore, when doped with the appropriate ions, exhibit emissions in the ultraviolet C (UVC) region. Some of them can emit two photons in the visible region for one excitation photon, having a quantum efficiency gre...
In this paper, a wavelength-selectable erbium-doped fiber (EDF) laser in L-band bandwidth with a simple structure and low cost is described. To obtain stable single-longitudinal-mode (SLM) and narrow laser linewidth, the 2 m unpumped EDF-based satura...
Here we present the cascade converter (CC), which provides real-time imaging of ionizing radiation (IoR) distribution. It was designed and manufactured with the simplest architecture, utilizing liquid crystal display (LCD) technology. Based on two me...
With the increasing challenges facing silicon complementary metal oxide semiconductor (CMOS) technology, emerging non-volatile memory (NVM) has received extensive attention in overcoming the bottleneck. NVM and computing-in-memory (CiM) architecture...
n-type doped Ge quantum wells with SiGe barriers represent a promising heterostructure system for the development of radiation emitters in the terahertz range such as electrically pumped quantum cascade lasers and optically pumped quantum fountain la...
A novel vernier effect filter is designed utilizing two cascaded Mach–Zehnder interferometers (MZIs). Integrating the filter into an erbium-doped fiber laser (EDFL), the tunability of laser wavelength is achieved. Each MZI comprises two sequent...
Here, we report the results of a Mössbauer study on hyperfine electrical and magnetic interactions in quadruple perovskite BiMn7O12 doped with 57Fe probes. Measurements were performed in the temperature range of 10 K < T < 670 K, wherein B...
As a p-type metal oxide, nickel oxide (NiO) has been extensively utilized for providing a favorable hole transport pathway in organic solar cells (OSCs). To obtain higher crystallinity, a post-annealing process at high temperature is required for the...
Chirped pulse amplification (CPA) has been a commonly used methodology to obtain powerful ultrashort laser pulses ever since its first demonstration. However, wavelength-tunable CPA systems are much less common. Wavelength-tunable ultrashort and inte...
A frequency comb generator (FCG) based on dual-cavity Brillouin random fiber lasing oscillation in the 1.5 μm telecon spectral window is established and experimentally demonstrated. In the half-open main cavity of the dual cavity, the stimulated B...
Glioblastoma remains the most lethal form of brain cancer, where hybrid nanomaterials biofunctionalized with polysaccharide peptides offer disruptive strategies relying on passive/active targeting and multimodal therapy for killing cancer cells. Thus...
Perovskite solar cells (PSCs) and dye-sensitized solar cells (DSCs) both represent promising strategies for the sustainable conversion of sunlight into electricity and fuels. However, a few flaws of current devices hinder the large-scale establishmen...