Metal-organic frameworks (MOFs) have attracted extensive attention as precursors for the preparation of carbon-based materials due to their highly controllable composition, structure, and pore size distribution. However, there are few reports of MOFs...
With the popularization of nuclear energy in the field of energy application, the effective removal of radioactive iodine isotopes is crucial for the long-term development of nuclear energy. In this paper, bimetallic MOFs with different Cu/Bi ratios...
The eutrophication of natural water is a severe environmental risk faced by coastal marine ecosystems, and the excess nitrogen and phosphorus in aquaculture effluent are one of the main sources of environmental pollution. Effectively reducing as well...
Metal–organic framework (MOF) materials possess a large specific surface area, high porosity, and atomically dispersed metal active sites, which confer excellent catalytic performance as peroxide (peroxodisulfate (PDS), peroxomonosulfate (PMS),...
The development of supercapacitors with ultrahigh power density, high energy density, and compatible integration for wearable microelectronic devices is significant but challenging. Herein, a bimetallic metal–organic framework (Ni/Co-MOF) with...
The synthesis of CoZn-MOF was accomplished via a simple hydrothermal method. The characterization of the synthesized materials was performed using X-ray diffraction (XRD), providing a thorough understanding of their structure and content. Subsequentl...
Lignin is an attractive renewable source of aromatics with a low effective hydrogen to carbon ratio (H/Ceff). The catalytic hydrodeoxygenation (HDO) of lignin-derived model compounds is a key strategy for lignin upgrading. In this work, the HDO of gu...
A series of MOF-derived ZrO2-supported Pd-Ni bimetallic catalysts (PdNi/UiO-67-CTAB(n)-A500) were prepared by co-impregnation and pyrolysis at 500 °C under air atmosphere using UiO-67-CTAB(n) (CTAB: cetyltrimethylammonium bromide; n: the concentr...
Metal synergy can enhance the catalytic performance, and a prefabricated solid precursor can guide the ordered embedding, of secondary metal source ions for the rapid synthesis of bimetallic organic frameworks (MM’-MOFs) with a stoichiometric r...
A novel metal organic framework (MOF)-derived porous copper/zinc bimetallic oxide catalyst was developed for the photoreduction of CO2 to methanol at a very fast rate of 3.71 mmol gcat−1 h−1. This kind of photocatalyst with high activity,...
Fe–Ce-MOFs with a rice-grain-like morphology were successfully obtained via hydrothermal synthesis, where ferric chloride (FeCl3) and cerium nitrate [Ce(NO3)3] served as the metal precursors and terephthalic acid (PTA) acted as the organic coor...
Exploring high-efficiency, low-cost, and long-life bifunctional self-supporting electrocatalysts is of great significance for the practical application of advanced rechargeable Zn-air batteries (ZABs), especially flexible solid-state ZABs. Herein, ul...
In this work, a novel mixed-component bimetallic metal–organic framework (MOF) composite material was synthesized via a solvothermal approach, and its structural and textural properties were systematically characterized using X-ray diffraction...
In this work, the combination of high surface area diatomite with Fe and Cu bimetallic MOF material catalysts (Fe0.25Cu0.75(BDC)@DE) were synthesized by traditional solvothermal method, and exhibited efficient degradation performance to tetracycline...
The systematic design of ruthenium-based electrocatalysts for the hydrogen evolution reaction (HER) is crucial for sustainable hydrogen production via electrocatalytic water splitting in an alkaline medium. However, the mismatch between water dissoci...
Cu-BTC (HKUST-1) metal–organic framework (MOF) is widely recognized for its carbon capture capability due to its unsaturated copper sites, high surface area, and well-defined porous structure. This study developed mixed matrix membranes (MMMs)...
Electrocatalytic reduction of CO2 to valuable chemicals can alleviate the energy crisis, and solve the greenhouse effect. The key is to develop non-noble metal electrocatalysts with high activity, selectivity, and stability. Herein, bimetallic metal...
Bimetallic MOFs have recently emerged as promising materials for wastewater treatment based on advanced oxidation processes. Herein, a new bimetallic MOF (FeCu-MOF) was fabricated by hydrothermal process. The structural, morphological, compositional...
Paraquat (PQ) has high acute toxicity, even at low concentrations. For most people, the main pathway of exposure to PQ is through the diet. Therefore, the development of simple and efficient methods for PQ testing is critical for ensuring food safety...
Removing arsenic from industrial wastewater remains a crucial task. To protect public health and safety and address environmental pollution, there is an urgent need for a material that can efficiently remove arsenic from wastewater. In this study, a...
Polydimethylsiloxane (PDMS) is commonly used in gas-separation studies because of its high CO2 permeability and stable mechanical properties. In this work, mixed matrix membranes (MMMs) were prepared by incorporating the bimetallic MOFs Ni-Cu-MOF-74,...
The development of highly efficient catalysts for the hydrogenation of dicyclopentadiene (DCPD) remains a critical challenge. In this study, we designed a series of bimetallic Ce–Ni metal–organic framework (MOF)-derived nanocatalysts by p...
Developing efficient electrocatalysts for urea oxidation reaction (UOR) can be a promising alternative strategy to substitute the sluggish oxygen evolution reaction (OER), thereby producing hydrogen at a lower cell-voltage. Herein, we synthesized a b...
Herein, a three-dimensional flower-like cobalt-nickel bimetallic metal-organic framework (CoNi-MOF) coupled with two-dimensional graphene oxide (GO) nanocomposites was successfully synthesized for the selective and simultaneous electrochemical determ...
In this study, the bimetallic Ni-Zr MOF-derived nickel-zirconium oxide (Ni-Zr-O)-impregnated silicotungstic acid (HSiW) nanocomposite catalyst (HSiW@Ni-Zr-O) was prepared via a hydrothermal procedure followed by a pyrolysis treatment, and its structu...
Constructing high-performance glucose sensors is of great significance for the prevention and diagnosis of diabetes, and the key is to develop new sensitive materials. In this paper, a series of Ni2Co1-L MOFs (L = H2BPDC: 4,4′-biphenyldicarboxy...
Silver-containing wound dressings have shown attractive advantages in the treatment of wound infection due to their excellent antibacterial activity. However, the introduction of silver ions or AgNPs directly into the wound can cause deposition in th...
The binary metal organic framework (MOF) is composed of two heterometallic ions bonded to an organic ligand. Compared with monometallic MOFs, bimetallic MOFs have greatly improved in terms of structure, porosity, active site, adsorption, selectivity,...
Bimetallic solutions play a vital role in the growth and functionality of copper trimesate (Cu-BTC) metal–organic frameworks (MOFs). The effect of Ag+, Ca2+, Mn2+, Co2+, and Zn2+ on the growth of Cu-BTC was studied by fabricating M-Cu-BTC MOFs...
Chloramphenicol antibiotics (CAPs) are broad-spectrum antibiotics, and excessive consumption has led to increasingly dangerous residues in the environment. The accumulation of these highly toxic and difficult-to-biodegrade CAPs and their long-term ex...
A metal–organic framework (MOF) is a highly porous material with abundant redox capacitive sites for intercalation/de-intercalation of charges and, hence, is considered promising for electrode materials in supercapacitors. In addition, dopants...
Microwave-assisted processing has shown tremendous promise in accelerating chemical reactions and reducing energy consumption through targeted dielectric heating. This study develops MOF-derived Mn-Co and Ce-Co oxide catalysts for energy-efficient be...
A novel sodium-promoted Fe-Co/NC catalyst prepared by incipient-wet-impregnation method using ZIF-67 as a support was employed to convert CO2 to light olefins through hydrogenation reaction. Properties of the synthesized catalysts calcinated at vario...
Photoelectrochemical (PEC) water splitting is a promising strategy to improve the efficiency of oxygen evolution reactions (OERs). However, the efficient adsorption of visible light as well as long-term stability of light-harvesting electrocatalysis...
Water electrolysis for hydrogen production has garnered significant attention in the context of increasing global energy demands and the “dual-carbon” strategy. However, practical implementation is hindered by challenges such as high over...
Co-doped Fe-MOF bimetallic organic framework materials at different ratios were synthesized based on the solvothermal method, and we evaluated their morphological characteristics by modern analytical methods such as SEM, XRD, FT-IR, and isotherm of n...
Dry reforming of methane (DRM) involves the conversion of CO2 and CH4, the most important greenhouse gases, into syngas, a stoichiometric mixture of H2 and CO that can be further processed via Fischer–Tropsch chemistry into a wide variety of pr...
The efficient synthesis of nanosheets containing two metal ions is currently a formidable challenge. Here, we attempted to dope lanthanide-based bimetals into porphyrin-based metal-organic skeleton materials (MOFs) by microwave-assisted heating. The...
Herein, the development of a niobium-based metal–organic framework (Nb-MOF) designed to serve as a catalytic support for the production of hydrogen (H2) from sodium borohydride (NaBH4) is reported. The Nb-MOF was synthesized via a solvothermal...
Developing cost-effective and high-efficiency catalysts for electrocatalytic oxygen evolution reaction (OER) is crucial for energy conversions. Herein, a series of bimetallic NiFe metal–organic frameworks (NiFe-BDC) were prepared by a simple so...
Metal–organic frameworks (MOFs) are used in catalysis due to their high specific surface area and porous structure. The dispersed active sites and limited reaction space that render MOFs have the potential for highly selective electrocatalytic...
Nitrogen oxides released from the combustion of fossil fuels are one of the main air pollutants. Selective catalytic reduction technology is the most widely used nitrogen oxide removal technology in the industry. With the development of nanomaterials...
This review extensively discusses current developments in bimetallic nanoparticle–GO and bimetallic nanoparticle–MOF nanocomposites as potential catalysts for HER, along with their different synthesis methodologies, structural characteris...
Metal–organic frameworks (MOFs) have characteristics such as a large specific surface area, distinct functional sites, and an adjustable pore size. However, the inherent low conductivity of MOFs significantly affects the charge transfer efficie...
Metal organic frameworks (MOFs) have been rapidly developed in the application of electrode materials due to their controllable morphology and ultra-high porosity. In this research, flower-like layered nickel-based bimetallic MOFs microspheres with d...
The global energy demand and environmental pollution are the two major challenges of the present scenario. Recently, researchers focused on the preparation and investigation of catalysts for their capacitive properties for energy storage devices. Thu...
The thermocatalytic hydrogenation of carbon dioxide (CO2) to methanol is considered as a potential route for green hydrogen storage as well as a mean for utilizing captured CO2, owing to the many established applications of methanol. Copper–zin...
Metal-organic frameworks (MOFs) have been investigated with regard to the oxygen evolution reaction (OER) due to their structure diversity, high specific surface area, adjustable pore size, and abundant active sites. However, the poor conductivity of...
Metal-organic framework (MOF)-based materials with abundant pore structure, large specific surface area, and atomically dispersed metal centers are considered as potential electrocatalysts for oxygen-evolution reaction (OER), while their ligand-satur...
Toluene is extensively used in many industrial products, which needs to be effectively detected by sensitive gas sensors even at low-ppm-level concentrations. Here, NiFe2O4 nano-octahedrons were calcinated from NiFe-bimetallic metal-organic framework...
of 2