In response to the high stiffness and hardness levels of alumina ceramic materials, the traditional SHPB (split Hopkinson pressure bar) experimental setup has been modified. This study analyzes the propagation patterns of stress waves in the SHPB sys...
This work analyzes phase transformations in quaternary mixtures (clay–glass–hematite–waste activated sludge (WAS)), processed at 800–1000 °C under conditions of oxygen deficiency. The results of the study showed that, depe...
High-purity Zr3AlC2 samples (>92 wt%) were synthesized and irradiated at room temperature using 100 keV He+ ions at fluences of 2 × 1016 and 1 × 1017 ions/cm2. As a Zr-based MAX phase, Zr3AlC2 is a promising candidate for accident-tole...
Longquan celadon represents the pinnacle of Chinese celadon, and there are many kilns in southern China that imitate Longquan celadon. During the Ming Dynasty, Jianyang Bowl Kiln was the representative kiln in Fujian Province for imitating Longquan c...
The selective removal of radioactive cesium-137 and strontium-90 from high-salinity radioactive wastewater remains a critical challenge, as competing ions reduce adsorption efficiency and selectivity. In this study, high-performance granulated adsorb...
Dielectric capacitors, characterized by ultra-fast charge/discharge speeds and high power densities, are widely used in modern electronic power systems. However, their low energy density and poor thermal stability limit applications. In this study, S...
Valorizing construction and demolition waste (CDW) via alkaline activation enables low-carbon binders. This study assesses binary geopolymers formulated with recycled brick powder (PLR) and recycled concrete powder (PCR) in seven precursor ratios (0&...
As the operational demands on piezoelectric devices grow increasingly stringent, there is an urgent need for materials capable of delivering stable performance at elevated temperatures. BiFeO3 (BF), a lead-free piezoelectric oxide with high-temperatu...
The ceramics industry has long embraced the principles of the circular economy, with a strong focus on the reuse and recovery of raw materials essential to the production cycle. This approach reduces costs by reintroducing secondary raw materials&mda...
In additive manufacturing technologies, the use of pastes and inks based on materials such as clay to create three-dimensional objects layer by layer has opened new possibilities in fields such as engineering and biomedicine. This review article aims...
Bismuth layer-structured ferroelectrics (BLSFs) are core candidates for high-temperature piezoelectric applications owing to their excellent thermal stability and fatigue resistance, yet traditional Bi4Ti3O12 (BiT)-based ceramics suffer from limited...
Alumina ceramics used in semiconductor plasma environments require high densification, microstructural homogeneity, and stable performance under increasingly aggressive processing conditions. However, systematic studies linking slurry processing para...
Archaeological research on Santiago Island (Cape Verde) offers a strategic framework for investigating ceramic material culture shaped by Iberian and African interactions during the early modern period. This study presents first-stage results from a...
Digital Light Processing (DLP), which operates through a layer-by-layer deposition, has proven to be a promising technique for obtaining complex and customized architectures. However, there are still numerous unresolved challenges in ceramics additiv...
Boro-antimonite glasses doped with Eu3+ and having the general composition (90-x) Sb2O3–xB2O3–10Li2O-0.5Eu2O3 (x = 0 to 60 in 10 mol. % increment) were prepared using the melt quenching method. The influence of B2O3/Sb2O3 substitution on...
How does zirconia processing affect the degree of tetragonal to monoclinic phase transformation (t ⟶ m) and the development and wettability of the surface? One hundred and twenty-four samples made of sintered zirconium were divided into four g...
This study systematically examines the fluidity, setting time, mechanical properties, and microstructural evolution of metakaolin-based geopolymer grouting materials with a relatively high water-to-solid (W/S) ratio window. A four-factor, three-level...
Canal wall down mastoidectomy (CWD) effectively eradicates cholesteatoma and chronic otitis media but frequently results in a problematic open mastoid cavity. Mastoid obliteration aims to reduce cavity-related morbidity. Bioceramic materials, includi...
Sluggish oxygen reduction reaction (ORR) remains a critical barrier to advancing intermediate-temperature electrochemical energy devices. Here, we demonstrate that strain engineering in two platforms, epitaxial thin films and freestanding membranes,...
This study focuses on preparing mullite grogs derived from selected waste materials and kaolin treated with advanced technologies to achieve high thermal resistance and low thermal expansion. The investigated waste materials include dust removal RON,...
The development of lithium-ion batteries necessitates cathode materials that possess excellent mechanical and thermal properties in addition to electrochemical performance. As a prominent functional ceramic, the properties of spinel LiMn2O4 are gover...
This manuscript describes the development of a nano-sized synthetic smectic clay hydrogel (LAP) that enables controlled oxygen delivery, making it a promising candidate for treating skin wound infections and promoting healing. LAP is an ingredient in...
This in vitro investigation evaluated the marginal fit of three pressable glass-ceramic onlay materials: a conventional monolithic lithium disilicate (IPS e.max Press, EM, ivoclar vivadent AG, Schaan, Liechtenstein) and two zirconia-reinforced glass-...
Highly filled (78 wt.%) alumina filaments with various (0.05, 0.10, 0.25 vol.%) graphene oxide concentration for Fused Filament Fabrication (FFF) were obtained. In order to evaluate the effect of graphene oxide on density, microstructure, and hardnes...
Three processes for the production of ceramics close to stoichiometric MgAl2O4 are benchmarked against each other. The traditional ceramic route is based on mostly crystalline starting powder, which is converted into ceramic via shaping and heat trea...
This work highlights the feasible fabrication of translucent ceramics from un-doped and Nd3+-doped BaLaLiWO6 (BLLW) and BaLaNaWO6 (BLNW) cubic tungstates using the Spark Plasma Sintering (SPS) method. Ceramics were sintered using pure-phase, homogene...
The growing energy demand in the residential sector, driven by the extensive use of air conditioning systems, poses serious environmental and economic challenges. A sustainable alternative is the use of efficient insulating materials derived from was...
The development of the ceramic industry requires the creation of new innovative products with improved properties. Given the growing demand for high-quality finishing materials and the limited availability of traditional raw materials, the search for...
Environmentally friendly materials with superior structural, physical, optical, and shielding capabilities are of great technological importance and are continually being investigated. In this work, novel multicomponent borate glasses with the compos...
The transition toward a circular economy is one of the most pressing challenges and opportunities of our time, requiring fundamental shifts in how we produce, consume, and manage materials [...]
The electrochemical production of silicon from SiO2 in molten salts can reduce energy consumption and mitigate carbon emissions associated with the conventional carbothermic process. In this study, we compare the anodic behaviour of platinum, graphit...
This research constitutes a novel experimental approach to valorizing an industrial by-product: the ‘brick’. Studies put emphasis on the importance of detailed structural characterization of brickminerals and their chemical evolution upon...
Additive manufacturing (AM) with clay and ceramic-based materials is gaining momentum as a sustainable alternative in construction, yet its advancement depends on bridging experimental practice with predictive modeling. This review synthesizes advanc...
In this study, SiHfCN ceramics were synthesized from a single-source precursor obtained by reacting Durazane 1800 with tetrakis(dimethylamido)hafnium(IV) (TDMAH). In a separate preparation, Ti3C2 MXene was incorporated into this precursor to produce...
Aluminum scandium nitride (Al1−xScxN) is a promising ferroelectric material for non-volatile random-access memory devices and electromechanical sensors. However, adverse effects on polarization from electrical leakage are a significant concern...
The crystallization behavior of the bioactive silicate glass “1d” was analyzed using non-isothermal conditions through differential scanning calorimetry (DSC). The plots carried out at different heating rates showed only one crystallizati...
Using spark plasma sintering technology, SiC-TiB2-TiC ceramic composites with various graphene oxide content (0.15, 0.25, 0.5 vol.%) were manufactured, and their microstructure as well as physico-mechanical and tribological properties were studied. C...
Numerous studies aimed to validate new shielding materials with the transition of medical radiation-shielding tools toward eco-friendly materials. In this study, we assessed the feasibility of ceramic composites, recently adopted in aerospace for int...
This work employs moiré interferometry to investigate the influence of sintering temperature and sandblasting on the optical and mechanical properties of magnesium aluminate spinel (MgAl2O4). S25CRX14 Spinel pellets were fabricated via Spark P...
Engineered cementitious composites (ECCs) are fiber-reinforced materials with enhanced tensile strength, ultra-high ductility, crack resistance, and long-term durability. This review aims to explore the latest developments when combining ECC and 3D p...
This study investigates a comprehensive study on the mechanical and microstructural behavior of cementitious mortars modified with a combination of internal carbonation (via solid CO2), calcined clay as a ceramic pozzolanic additive, and bio-based sh...
This study comparatively investigates the effects of vacuum sintering and traditional sintering on the structure and electrical properties of lead zirconate titanate (PZT) 5H (PZT-5H) piezoelectric ceramics. The density of the vacuum-sintered ceramic...
Implant-associated infections remain a major clinical challenge, often leading to implant failure, revision surgery, and increased healthcare burden. Systemic antibiotic administration is limited by poor local bioavailability and systemic side effect...
High-entropy materials have emerged as promising candidates for high-temperature structural, magnetic, and electrochemical applications due to their unique combination of compositional complexity, thermal stability, and tailored functionality. In thi...
Despite significant interest in their functional properties, the mechanical behavior of high-entropy oxides (HEOs) is not well studied, particularly at elevated temperatures. Bulk (Co,Cu,Mg,Ni,Zn)O (transition metal (TM)-HEO) samples were deformed un...
Transparent CAD/CAM monolithic ceramics are increasingly used in dentistry due to their combination of high strength, esthetics, and durability, achieved through high yttria content and multilayered systems. This study evaluates the mechanical behavi...
The utilisation of magnesium oxide-based binders (M) as an alternative to hydrated calcium silicate materials is a promising avenue for binding methodologies. However, the efficacy of using silica fume (S) as a co-binder with magnesium oxide in sulph...
Sulfate soil stabilisation, while offering technical benefits for infrastructure, is a challenging process, complicated by the nucleation of ettringite, an expansive mineral that can cause soil deterioration. This study was undertaken to elucidate th...
Garnet-type Li7La3Zr2O12 (LLZO) is a solid electrolyte candidate for ASSLBs, owing to its wide electrochemical window and intrinsic safety. Yet phase-pure LLZO remains difficult because secondary phases form, and the transition towards the tetragonal...
The great city of Mayapan has experienced a technological change in pottery making, and our results confirm a shift in the raw materials and possibly the potters’ knowledge about them. The dynamics of change during the Postclassic period in the...
Get Alerted
Add your email address to receive forthcoming issues of this journal.
