Skip to Content

Materials, Volume 17, Issue 23

2024 December-1 - 347 articles

Cover Story: In this paper, a planar defect in visible-light-activated CoOx-TiO2 inverse opals is implemented through the fabrication of trilayer films incorporating a thin mesoporous interlayer. The formation of “donor”-like states was realized within the photonic band gap that moderated Bragg reflection and doubled the slow photon regions, resulting in markedly improved photocatalytic performance, organics degradation and photocurrent generation. Optical defect engineering in photonic photocatalysts can provide a versatile structural approach to enhance slow photon amplification effects that can be further combined with judicious compositional modifications for visible light photocatalysis. View this paper
  • Issues are regarded as officially published after their release is announced to the table of contents alert mailing list .
  • You may sign up for email alerts to receive table of contents of newly released issues.
  • PDF is the official format for papers published in both, html and pdf forms. To view the papers in pdf format, click on the "PDF Full-text" link, and use the free Adobe Reader to open them.

Articles (347)

  • Article
  • Open Access
2 Citations
1,758 Views
14 Pages

6 December 2024

In this paper, we studied the deposition and characterization of monolithic and silver-doped copper coatings using RF magnetron sputtering. The main objective was to examine the impact of different Ag contents on natural and thermally induced aging w...

(This article belongs to the Special Issue Preparation of Thin Films by PVD/CVD Deposition Techniques)
  • Article
  • Open Access
3 Citations
1,733 Views
17 Pages

6 December 2024

A new model is developed to predict the mechanical behavior of brittle sandstone under triaxial compression. The proposed model aims to determine the normalized critical crack length (Lcr), through which the failure strength (σf) of sandstone can be...

(This article belongs to the Special Issue Advances in Rock and Mineral Materials)
  • Article
  • Open Access
1 Citations
1,726 Views
12 Pages

Comparison of Graphites Intercalated with Fluorine as Slow Neutron Reflectors

  • Batiste Clavier,
  • Valentin Czamler,
  • Marc Dubois,
  • Killian Henry and ,
  • Valery Nesvizhevsky and
  • Elodie Petit
  • + 1 author+ 0 author

6 December 2024

The use of neutron reflectors is an effective method for improving the quality of neutron sources and neutron delivery systems. In this work, we further develop the method based on the Bragg scattering of neutrons in crystals with large interplanar d...

(This article belongs to the Special Issue System Design and Materials for Accelerators and Compact Accelerator-Driven Neutron Sources)
  • Article
  • Open Access
2,520 Views
18 Pages

Experimental Study of Mechanical Wave Propagation in Solidifying Cement-Based Composites

  • Luboš Jakubka,
  • Libor Topolář,
  • Anna Nekorancová,
  • Richard Dvořák and ,
  • Kristýna Hrabová,
  • Felix Černý,
  • Szymon Skibicki and
  • Luboš Pazdera
  • + 3 authors+ 0 author

6 December 2024

In this paper, a new measurement procedure is presented as an experimental study. In this experimental study, a measurement system using the pass-through pulsed ultrasonic method was used. The pilot application of the measurement setup was to monitor...

(This article belongs to the Special Issue Concretes and Cement-Based Composites: Additives/Admixtures, Hydration Process and Durability Research (2nd Edition))
  • Review
  • Open Access
78 Citations
16,851 Views
24 Pages

Topology Optimization: A Review for Structural Designs Under Statics Problems

  • Tianshu Tang,
  • Leijia Wang,
  • Mingqiao Zhu,
  • Huzhi Zhang and ,
  • Jiarui Dong,
  • Wenhui Yue and
  • Hui Xia
  • + 2 authors+ 0 author

6 December 2024

Topology optimization is a powerful structural design method that determines the optimal configuration by distributing materials efficiently within a given design domain while satisfying specified load, performance, and volume constraints. Unlike siz...

  • Article
  • Open Access
5 Citations
2,619 Views
19 Pages

Hybrid Microwave/Solar Energy Harvesting System Using 3D-Printed Metasurfaces

  • Argyri Drymiskianaki,
  • Zacharias Viskadourakis and
  • George Kenanakis

5 December 2024

In this study, a hybrid energy harvesting system based on a conventional solar cell combined with 3D-printed metasurface units is studied. Millimeter-scale metasurface units were fabricated via the stereolithography technique, and then they were cove...

(This article belongs to the Section Energy Materials)
  • Article
  • Open Access
9 Citations
2,466 Views
13 Pages

Study on the Microstructure and Corrosion Behavior of Dissimilar Aluminum Alloy Welded Joints Formed Using Laser Welding

  • Suojun Zhang,
  • Xiaozhen Liu,
  • Shuwan Cui,
  • Hongchen Li and ,
  • Ganli Mo,
  • Hao Li and
  • Hongfeng Cai
  • + 2 authors+ 0 author

5 December 2024

This study investigates the evolution mechanisms and electrochemical corrosion behavior of laser-welded joints (WJs) between 6063 and 6082 dissimilar aluminum alloys under varying welding powers. The analysis focused on the microstructure of the weld...

  • Article
  • Open Access
4 Citations
1,453 Views
9 Pages

5 December 2024

In this work, Mn-Zn-Ni-Mg-Al multi-layer films were annealed in air at different temperatures to form spinel-structured Mn1.6Zn0.2Ni0.6Mg0.2Al0.4O4 high-entropy oxide films. X-ray diffraction results demonstrate that the films possess a polycrystalli...

(This article belongs to the Special Issue New Techniques for Preparing Thin Films: Characteristics and Further Developments)
  • Article
  • Open Access
3 Citations
3,176 Views
38 Pages

Low-Cost Open-Source Melt Flow Index System for Distributed Recycling and Additive Manufacturing

  • Dawei Liu,
  • Aditi Basdeo,
  • Catalina Suescun Gonzalez,
  • Alessia Romani and ,
  • Hakim Boudaoud,
  • Cécile Nouvel,
  • Fabio A. Cruz Sanchez and
  • Joshua M. Pearce
  • + 3 authors+ 0 author

5 December 2024

The increasing adoption of distributed recycling via additive manufacturing (DRAM) has facilitated the revalorization of materials derived from waste streams for additive manufacturing. Recycled materials frequently contain impurities and mixed polym...

(This article belongs to the Section Polymeric Materials)
  • Article
  • Open Access
1 Citations
1,700 Views
20 Pages

A Container for Storing and Transporting Bulk Material Samples

  • Zbigniew Suchorab,
  • Dagmara Olszewska-Pastuszak,
  • Krzysztof Tabiś and
  • Kamil Pluta

5 December 2024

This article presents problems related to the storage of building material samples and discusses the related requirements and standards. Solutions for containers to store material samples were proposed and tests were performed in accordance with the...

(This article belongs to the Section Materials Physics)
  • Article
  • Open Access
1 Citations
1,564 Views
15 Pages

Rectangular Improvement Method for Plan View Pattern of Plates During the Angular Rolling Process

  • Chunyu He,
  • Junyi Luo,
  • Zhipeng Xu,
  • Zhiqiang Wang and ,
  • Zhong Zhao,
  • Zhiqiang Wu and
  • Zhijie Jiao
  • + 2 authors+ 0 author

5 December 2024

The effect of the angular rolling process on the plan view pattern of a plate was studied, and the rectangular influencing factors and improvement methods for this process were proposed in this paper. DEFORM (v11.0) finite element software was used t...

(This article belongs to the Special Issue Progressive Technologies and Materials in Mechanical and Materials Engineering)
  • Article
  • Open Access
16 Citations
3,361 Views
14 Pages

Enhanced Interfacial Properties of Carbon Fiber/Polymerization of Monomers Reactants Method Polyimide Composite by Polyimide Sizing

  • Chengyu Huang,
  • Jinsong Sun,
  • Zhiwei Liu,
  • Bo Li and ,
  • Mingchen Sun,
  • Hansong Liu,
  • Yan Zhao,
  • Peng Zhang and
  • Jianwen Bao
  • + 4 authors+ 0 author

5 December 2024

Carbon fiber (CF)-reinforced polyimide (PI) resin matrix composites have great application potential in areas such as rail transport, medical devices, and aerospace due to their excellent thermal stability, dielectric properties, solvent resistance,...

(This article belongs to the Special Issue Research on Properties of Polymers and Their Engineering Applications)
  • Article
  • Open Access
7 Citations
2,260 Views
16 Pages

5 December 2024

Duplex stainless steels, known for their excellent corrosion resistance, are employed in a variety of chloride solutions—acidic, neutral, and alkaline—due to a stable passive film that forms on their surfaces. This study involved polariza...

(This article belongs to the Special Issue Surface Engineering & Coating Technologies for Corrosion and Tribocorrosion Resistance—3rd Edition)
  • Article
  • Open Access
2 Citations
1,513 Views
21 Pages

5 December 2024

In practical engineering, due to quality inspections of connections between prefabricated components and construction errors, reserved reinforcing bars in the transition layer may be partially insufficient or even completely absent. This defect signi...

(This article belongs to the Section Corrosion)
  • Article
  • Open Access
3 Citations
1,420 Views
21 Pages

5 December 2024

The influence of ball burnishing on friction and wear at elevated temperatures under fretting conditions has not yet been reported. Fretting experiments were conducted using the Optimol SRV5 tester (Optimol Instruments, Munich, Germany) under dry gro...

(This article belongs to the Special Issue Precision and Ultra-Precision Subtractive and Additive Manufacturing Processes of Alloys and Steels, 2nd Edition)
  • Article
  • Open Access
5 Citations
1,969 Views
18 Pages

5 December 2024

In order to disintegrate nuclear fuel rods in the grid connection structure, a 10 kW fiber laser was used to cut a stainless steel simulation component with four layers of 3 mm thick plates and 12 mm gaps. The slit width is regarded as an important i...

(This article belongs to the Special Issue Microstructure, Mechanical Properties, and Deformation Characteristics of Metals and Alloys)
  • Article
  • Open Access
6 Citations
1,711 Views
17 Pages

Impact of SiO2 and TiO2 Nanoparticles on the Elasticity and Aging Resistance of Polyvinyl Acetate (PVAc) Adhesive

  • Gorana Petković,
  • Suzana Pasanec Preprotić,
  • Marina Vukoje and
  • Ivana Bolanča Mirković

5 December 2024

Adhesive modification with nanoparticles affects multiple adhesives properties, making it essential to evaluate and compare changes across all key characteristics—existing positive and limiting properties. This study investigates the impact of...

  • Article
  • Open Access
7 Citations
1,892 Views
15 Pages

Reinforcing Bus Living Space with Recycled Carbon Fibers from Expired Prepreg in the Aircraft Industry

  • Miguel Angel Martínez,
  • Daniel Lavayen-Farfán,
  • Juana Abenojar,
  • María Jesús López-Boada and
  • Daniel García-Pozuelo

5 December 2024

Due to increasing mobility and energy conservation needs, improving bus and coach safety without adding weight is essential. Many crashes with fatal outcomes for vehicle occupants are associated with the rollover of the vehicle, revealing the structu...

(This article belongs to the Special Issue Experimental Testing, Manufacturing and Numerical Modelling of Composite and Sandwich Structures (Second Edition))
  • Article
  • Open Access
5 Citations
2,187 Views
10 Pages

5 December 2024

Amber is a fragile (in Angell’s classification) natural glass that has performed maturation processes over geological time. The terahertz dynamics of Baltic amber that was about 40 million years old were studied by terahertz time-domain spectroscopy...

(This article belongs to the Section Materials Physics)
  • Article
  • Open Access
1 Citations
1,588 Views
18 Pages

5 December 2024

The simulation of additive manufacturing has become a prominent research area in the past decade. Process physics simulations are employed to replicate laser powder bed fusion (L-PBF) manufacturing processes, aiming to predict potential issues throug...

(This article belongs to the Special Issue Research on Laser Welding and Laser Additive Manufacturing)
  • Article
  • Open Access
10 Citations
1,917 Views
14 Pages

The Influence of CLSM Magnification on the Measured Roughness of Differently Prepared Dental Materials

  • Martin Rosentritt,
  • Anne Schmutzler,
  • Sebastian Hahnel and
  • Laura Kurzendorfer-Brose

5 December 2024

This in vitro study investigated how varying magnifications (5×, 10×, 20×, and 50×) using a confocal laser scanning microscope (CLSM) influence the measured surface roughness parameters, Ra/Sa and Rz/Sz, of various materials w...

(This article belongs to the Section Biomaterials)
  • Article
  • Open Access
2 Citations
2,267 Views
15 Pages

Water Absorption of Underwater Products by Additive Manufacturing

  • Andrea Pino,
  • Iván Ibáñez-Felip and
  • Rosario Vidal

5 December 2024

Rapid prototyping techniques offer significant advantages in terms of fabrication speed, accessibility, and low cost. This study explores the use of low-cost stereolithographic resins to produce prototypes intended for underwater conditions. The obje...

  • Article
  • Open Access
4 Citations
2,046 Views
13 Pages

5 December 2024

Tunnel oxide passivating contact cells have become the mainstream form of high-performance photovoltaic cells; however, the key factor restricting the further improvement of tunnel oxide passivating contact cell performance lies in the deposition pro...

(This article belongs to the Section Thin Films and Interfaces)
  • Article
  • Open Access
28 Citations
3,544 Views
21 Pages

5 December 2024

Despite Fused Deposition Modeling (FDM) being an economical 3D printing method known for its material versatility and ease of use, the mechanical performance of FDM-produced components is significantly influenced by process parameter settings. This s...

(This article belongs to the Special Issue Design and Application of Additive Manufacturing: 3rd Edition)
  • Article
  • Open Access
9 Citations
2,622 Views
21 Pages

Microwave Heating and Self-Healing Performance of Asphalt Mixtures Containing Metallic Fibres from Recycled Tyres

  • Jose Norambuena-Contreras,
  • Jose L. Concha,
  • María J. Varela,
  • Laura Trigos and ,
  • Lily Poulikakos,
  • Alvaro González and
  • Martín Arraigada
  • + 2 authors+ 0 author

5 December 2024

This study investigates how recycled metal fibres from End-of-Life Tyres (ELTs) affect both microwave heating efficiency and crack healing properties in dense asphalt mixtures. The aim is to improve tyre recyclability by using their fibres in asphalt...

(This article belongs to the Section Construction and Building Materials)
  • Systematic Review
  • Open Access
7 Citations
4,780 Views
17 Pages

5 December 2024

Purpose: This meta-analysis evaluates the evolution, applications, and recent advancements in the materials and treatments used in ophthalmic lenses, focusing on their effectiveness, comfort, and safety, while also considering sustainability as a key...

  • Article
  • Open Access
11 Citations
2,470 Views
10 Pages

5 December 2024

This study presents the synthesis of a transparent, flexible gel polymer electrolyte (GPE) based on the protic ionic liquid BMImHSO4 and on polyvinyl alcohol (PVA) through solution casting and electrochemical evaluation in a 2.5 V symmetrical C/C ele...

  • Article
  • Open Access
3 Citations
2,242 Views
16 Pages

Design and Analysis of Fluorine-Free Mold Fluxes for Continuous Casting of Peritectic Steels

  • Márcia Maria da Silva Monteiro Pereira,
  • Hervé Tavernier,
  • Tiago dos Santos Junior and
  • Fernando Vernilli

4 December 2024

Fluorine-based mold fluxes are critical for continuous casting of peritectic steels, controlling heat transfer and preventing cracks. However, environmental and health concerns associated with fluorine have spurred the search for alternative flux com...

(This article belongs to the Special Issue Microstructure, Mechanical Properties and Additive Manufacturing of Steels)
  • Article
  • Open Access
1,666 Views
17 Pages

Effect of Dispersed ZrO2 Particles on Microstructure Evolution and Superconducting Properties of Nb-Ti Alloy

  • Rafał Idczak,
  • Robert Konieczny,
  • Wojciech Nowak,
  • Wojciech Bartz and
  • Michał Babij

4 December 2024

The influence of dispersed ZrO2 particles on the microstructure evolution and the superconducting properties of a Nb-Ti alloy was investigated. The studied materials were prepared by different methods including mechanical alloying (MA) and arc-meltin...

  • Article
  • Open Access
2 Citations
1,522 Views
17 Pages

4 December 2024

This study investigates the compressive behavior of aluminum honeycombs partially filled with expanded polystyrene (EPS) foam, emphasizing the effects of filler area fractions and vertex contact locations on energy absorption and crush characteristic...

(This article belongs to the Special Issue On the Residual Strength and Damage Identification of Damaged Composite Structure)
  • Article
  • Open Access
5 Citations
2,089 Views
20 Pages

Evaluation of Shade Integration of a Novel Universal-Shade Flowable Bulk-Filling Resin Composite

  • Hirofumi Kaneko,
  • Chiharu Kawamoto,
  • Yu Toida,
  • Ryotaro Yago and ,
  • Di Wu,
  • Yuan Yuan,
  • Fei Chen,
  • Monica Yamauti,
  • Hidehiko Sano and
  • Atsushi Tomokiyo
  • + 5 authors+ 0 author

4 December 2024

Background: This study aimed to evaluate the color-matching and light transmission properties of a newly developed aesthetic flowable resin composite, OCFB-001. Methods: Rubber molds containing cylindrical cavities were filled with Estelite Sigma Qui...

(This article belongs to the Special Issue Recent Research in Restorative Dental Materials)
  • Article
  • Open Access
4 Citations
1,689 Views
15 Pages

Finite Element and Theoretical Analysis of High-Strength Steel-Strand Mesh Reinforced ECCs Under Flexural Load

  • Lei Cao,
  • Ziyuan Li,
  • Yuxuan Li,
  • Ke Li and ,
  • Denghu Jing,
  • Ya Qi and
  • Yaohui Geng
  • + 2 authors+ 0 author

4 December 2024

This research investigates the flexural performance of slabs reinforced with high-strength steel-strand mesh (HSSM) and engineered cementitious composites (ECCs). By employing finite element analysis (FEA) and theoretical modeling, this study aims to...

(This article belongs to the Section Materials Simulation and Design)
  • Article
  • Open Access
4 Citations
2,217 Views
19 Pages

Experimental Study on the Size Effect of Compression-Shear Fracture Characteristics of Rock-like Materials Containing Open Cracks

  • Zixuan Li,
  • Shiyuan Huang,
  • Chuan Lv,
  • Cheng Liao and ,
  • Xudong Li and
  • Hongbo Du
  • + 1 author+ 0 author

4 December 2024

Understanding fracture mechanics in rock-like materials under compression-shear condition is critical for predicting failure mechanisms in various engineering applications, such as mining and civil infrastructure. This study conducted uniaxial compre...

(This article belongs to the Topic Sustainable Building Materials)
  • Article
  • Open Access
3 Citations
2,765 Views
23 Pages

Prediction of the Stability of the Casting Process by the HPDC Method on the Basis of Knowledge Obtained by Data Mining Techniques

  • Marcin Brzeziński,
  • Jakub Wiśniowski,
  • Mariusz Łucarz,
  • Karolina Kaczmarska and ,
  • Alena Pribulová and
  • Peter Futáš
  • + 1 author+ 0 author

4 December 2024

High-pressure die casting (HPDC) of aluminum alloys is one of the most efficient manufacturing methods, offering high repeatability and the ability to produce highly complex castings. The cast parts are characterized by good surface quality, high dim...

(This article belongs to the Special Issue Research on Metal Cutting, Casting, Forming, and Heat Treatment)
  • Article
  • Open Access
9 Citations
1,648 Views
18 Pages

4 December 2024

The issue of slope stability in earthquakes has become increasingly prominent with the construction of many infrastructure projects such as highways, bridges, and tunnels. To explore the dynamic response characteristics of bedding rock slopes in an e...

  • Article
  • Open Access
6 Citations
1,777 Views
11 Pages

Research on Natural Fiber Microstructure Detection Method Based on CA-DeepLabv3+

  • Shuaishuai Lv,
  • Xiaoyuan Li,
  • Hitoshi Takagi,
  • Zhengjie Hou and ,
  • Yifei Zhai,
  • Linfei Chen and
  • Hongjun Ni
  • + 2 authors+ 0 author

4 December 2024

Natural fibers exhibit noticeable variations in their cross-sections, and measurements assuming a circular cross-section can lead to errors in the values of their properties. Providing more accurate geometric information of fiber cross-sections is a...

(This article belongs to the Section Polymeric Materials)
  • Article
  • Open Access
10 Citations
2,157 Views
20 Pages

4 December 2024

To improve the performance of AlCoCrFeNi2.1 eutectic high-entropy alloys (EHEA) to meet industrial application requirements, ZrxAlCoCrFeNi2.1 high-entropy alloys (x = 0, 0.01, 0.05, 0.1) were synthesized through vacuum induction melting. Their micros...

  • Article
  • Open Access
15 Citations
2,488 Views
25 Pages

The Effect of μ-Limestone Additions on the Mechano-Chemical and Microstructural Properties of Slag and Binary Slag/Ground Fly Ash Alkaline-Activated Binders

  • Francisco Javier Vázquez-Rodríguez,
  • Lucio Guillermo López-Yépez,
  • Nora Elizondo-Villarreal,
  • Ana María Guzmán-Hernández and ,
  • Lauren Yolanda Gómez-Zamorano and
  • Edén Amaral Rodríguez-Castellanos
  • + 1 author+ 0 author

4 December 2024

An alternative approach to reducing the clinker factor, i.e., worldwide CO2 emissions resulting from the production of composite cement, is to replace these materials with supplementary aluminosilicate-based materials that promote the formation of al...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
1 Citations
1,831 Views
30 Pages

4 December 2024

Additive manufacturing (AM) methods like powder bed fusion–laser beam (PBF-LB) enable complex geometry production. However, understanding and predicting the microstructural properties of AM parts remain challenging due to the inherent non-homog...

(This article belongs to the Section Materials Simulation and Design)
  • Review
  • Open Access
16 Citations
4,269 Views
48 Pages

4 December 2024

Coatings based on refractory metals and compounds have been used in various industries since the last century due to their high thermal and heat resistance, as well as their excellent mechanical and tribological properties. Advances have made it poss...

(This article belongs to the Special Issue Processing–Structure–Properties Relationships of Advanced Materials)
  • Article
  • Open Access
6 Citations
1,539 Views
13 Pages

Microstructure of the Working Layer of X46Cr13 Steel in a Bimetal System with Gray Cast Iron

  • Natalia Przyszlak,
  • Tomasz Wróbel,
  • Agnieszka Dulska,
  • Paweł M. Nuckowski and ,
  • Dariusz Łukowiec and
  • Marcin Stawarz
  • + 1 author+ 0 author

4 December 2024

The research conducted in this study aimed to determine whether the production of a layered casting in the material system of X46Cr13 steel (working part) and gray cast iron (base part) can be integrated with the hardening process of this steel withi...

(This article belongs to the Special Issue Achievements in Foundry Materials and Technologies)
  • Article
  • Open Access
2 Citations
1,514 Views
15 Pages

4 December 2024

This study examines the preservation challenges of archaeological iron, bone, and glass within shared environments focusing on material-specific degradation mechanisms. The relative humidity (RH) requirements for these materials can vary significantl...

(This article belongs to the Special Issue Advances in Materials Science and Engineering—in Celebration of 55th Anniversary of the Faculty of Technical Sciences, Warmia and Mazury University in Olsztyn, Poland)
  • Article
  • Open Access
24 Citations
2,375 Views
14 Pages

Nanoscale Indentation-Induced Crystal Plasticity in CrCoNi Medium-Entropy Alloys Containing Short-Range Order

  • Meijing Ren,
  • Fengbo Han,
  • Xu Zhu,
  • Yue Peng and ,
  • Yanqing Zu,
  • Peitao Liu and
  • Ailing Feng
  • + 2 authors+ 0 author

4 December 2024

CrCoNi medium-entropy alloys (MEAs), characterised by their high configurational entropies, have become a research hotspot in materials science. Recent studies have indicated that MEAs exhibit short-range order (SRO), which affects their deformation...

  • Article
  • Open Access
5 Citations
2,515 Views
25 Pages

4 December 2024

This study presents a comprehensive assessment of the fresh state, rheological, and mechanical properties of alkali-activated mortars (AAMs) developed by incorporating magnesium oxide (MgO) and nanomaterials. A total of 24 AAM mixes with varying cont...

(This article belongs to the Special Issue Preparation and Properties of New Cementitious Materials (2nd Edition))
  • Article
  • Open Access
3 Citations
1,808 Views
13 Pages

Anion-Doped Perovskite Oxygen-Permeable Membranes Fabricated via an Improved One-Step Thermal Processing Approach

  • Yongqiang Niu,
  • Wanglin Zhou,
  • Shuyang Ni,
  • Zhengkun Liu and ,
  • Guangru Zhang and
  • Wanqin Jin
  • + 1 author+ 0 author

4 December 2024

Anion-doped perovskite membranes with a hollow fiber geometry have excellent oxygen separation performance. However, during the fabrication process of hollow fiber membranes, soaking the precursor in deionized water leads to elemental dissolution, es...

(This article belongs to the Section Thin Films and Interfaces)
  • Article
  • Open Access
5 Citations
1,688 Views
16 Pages

4 December 2024

Using a pilot-scale chamber with an interior capacity of 340 L, European aspen (Populus tremula) wood boards were thermally modified (TM) under pressure in nitrogen at a maximum temperature of 160–170 °C, for 60–180 min, and with an i...

(This article belongs to the Special Issue Bio-Based Materials from Wood and Other Lignocellulosic Materials: Development, Properties and Design)
  • Article
  • Open Access
6 Citations
2,304 Views
16 Pages

4 December 2024

A hot isostatically pressed specimen of the A357 alloy in T6 condition has been tested for fatigue performance in situ. During testing, multiple small cracks were observed during the first cycle, both in proximity to and far from the stress concentra...

(This article belongs to the Special Issue Fatigue Crack Growth in Metallic Materials (Volume II))
  • Article
  • Open Access
11 Citations
2,792 Views
11 Pages

Magnetic Performance and Anticorrosion Coating Stability of Thermally Demagnetized Nd-Fe-B Permanent Magnets for Reuse Applications

  • Tomaž Tomše,
  • Pierre Kubelka,
  • Rosario Moreno López,
  • Peter Fleissner and ,
  • Laura Grau,
  • Matej Zaplotnik and
  • Carlo Burkhardt
  • + 2 authors+ 0 author

4 December 2024

Nd-Fe-B-type permanent magnets, containing approximately 30% critical rare-earth elements by weight, are essential components in renewable energy systems (e.g., wind turbines, hydroelectric generators) and electric vehicles. They are also critical fo...

(This article belongs to the Special Issue Research on Hard Magnetic Materials: Synthesis, Properties, and Applications)
  • Article
  • Open Access
4 Citations
1,570 Views
18 Pages

Deep Learning-Assisted Analysis of GO-Reinforcing Effects on the Interfacial Transition Zone of CWRB

  • Jiajian Yu,
  • Zhiwei Chen,
  • Xiaoli Xu,
  • Xinjie Su and ,
  • Shuai Liang,
  • Yanchao Wang,
  • Junqing Hong and
  • Shaofeng Zhang
  • + 3 authors+ 0 author

4 December 2024

Understanding the enhancing mechanisms of graphene oxide (GO) on the pore structure characteristics in the interfacial transition zone (ITZ) plays a crucial role in cemented waste rock backfill (CWRB) nanoreinforcement. In the present work, an innova...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
1,431 Views
14 Pages

3 December 2024

The ductile properties of irradiated materials are among of the important indicators related to their structural integrity. These properties are generally determined by performing tensile tests on irradiated materials in the irradiation environment....

(This article belongs to the Section Advanced Nanomaterials and Nanotechnology)

of 7

XFacebookLinkedIn
Materials - ISSN 1996-1944