Skip to Content

192 Results Found

  • Review
  • Open Access
44 Citations
8,460 Views
24 Pages

The Joining of Copper to Stainless Steel by Solid-State Welding Processes: A Review

  • Gaurang R. Joshi,
  • Vishvesh J. Badheka,
  • Raghavendra S. Darji,
  • Ankit D. Oza and ,
  • Vivek J. Pathak,
  • Dumitru Doru Burduhos-Nergis,
  • Diana Petronela Burduhos-Nergis,
  • Gautam Narwade and
  • Gopinath Thirunavukarasu
  • + 4 authors+ 0 author

17 October 2022

Joining immiscible materials such as copper and stainless steel together is a significant concern due to distinct mechanical and metallurgical properties across the joint line, such as melting points, the coefficient of linear thermal expansion, and...

(This article belongs to the Special Issue Manufacturing and Mechanics of Materials)
  • Article
  • Open Access
11 Citations
3,448 Views
15 Pages

Solid State Joining of a Cold Rolled Zr-Based Bulk Metallic Glass to a Wrought Aluminum Alloy by Power Ultrasonics

  • Michael Becker,
  • Alexander Kuball,
  • Amirhossein Ghavimi,
  • Bastian Adam and ,
  • Ralf Busch,
  • Isabella Gallino and
  • Frank Balle
  • + 2 authors+ 0 author

1 November 2022

Ultrasonic metal welding (UMW) enables joining in the solid state at relative low temperatures with short cycle times. This technique is of particular interest for joining metallic glasses to each other or to other materials, because crystallization...

(This article belongs to the Collection Welding and Joining Processes of Materials)
  • Review
  • Open Access
18 Citations
6,796 Views
55 Pages

Current Trends and Emerging Strategies in Friction Stir Spot Welding for Lightweight Structures: Innovations in Tool Design, Robotics, and Composite Reinforcement—A Review

  • Suresh Subramanian,
  • Elango Natarajan,
  • Ali Khalfallah,
  • Gopal Pudhupalayam Muthukutti and ,
  • Reza Beygi,
  • Borhen Louhichi,
  • Ramesh Sengottuvel and
  • Chun Kit Ang
  • + 3 authors+ 0 author

11 June 2025

Friction stir spot welding (FSSW) is a solid-state joining technique increasingly favored in industries requiring high-quality, defect-free welds in lightweight and durable structures, such as the automotive, aerospace, and marine industries. This re...

(This article belongs to the Special Issue Welding and Joining of Metallic Materials: Microstructure and Mechanical Properties, 2nd Edition)
  • Article
  • Open Access
11 Citations
4,783 Views
29 Pages

27 May 2022

Joining dissimilar materials is always a challenging and interesting topic for researchers and industries. Friction drill joining, as a solid-state process, is a novel approach to connecting similar and dissimilar materials. Dissimilar metals, especi...

  • Article
  • Open Access
14 Citations
3,912 Views
23 Pages

Welding of Low Carbon Steel Tubes Using Magnetically Impelled Arc Butt Welding: Experimental Investigation and Characterization

  • Mukti Chaturvedi,
  • Arungalai Vendan Subbiah,
  • Mohammed Y. Tharwan,
  • Sharaf Al Sofyani and ,
  • Vladimir Kachinskiy,
  • Sharanabasavaraj Radder,
  • Ashraff Ali Kaveripakkam Suban,
  • Essmat Showman,
  • M. Fattouh and
  • Ammar H. Elsheikh
  • + 5 authors+ 0 author

17 November 2022

Magnetically impelled arc butt (MIAB) welding is a solid-state technique of welding that utilizes the heating effect of a high-speed rotating arc for the formation of the weld. The process exhibits lower time and power consumption compared to convent...

(This article belongs to the Special Issue Advanced Welding Technology in Metals II)
  • Feature Paper
  • Article
  • Open Access
6 Citations
5,218 Views
18 Pages

Process Technology for Diffusion Welding with Cyclically Pulsative Joining Forces

  • Björn John,
  • Holger Letsch,
  • Johannes Wölck,
  • Marcel Hess and
  • Jonas Hensel

8 March 2023

Diffusion welding is a solid-state welding process and is characterised by the process parameters temperature, compression force and process time. Usually, the process force is applied as static load, and high demands with respect to specimen surface...

(This article belongs to the Section Welding and Joining)
  • Article
  • Open Access
1 Citations
3,129 Views
18 Pages

29 March 2023

This paper presents experimental investigations on the solid-state joint of 3 mm sheets of AlMg3 alloy with X2CrNiMo17-12-2 stainless steel. The study presents a dissimilar joint that was made in a solid state using a modified milling cutter. The stu...

(This article belongs to the Special Issue Advances in Welding Process and Materials)
  • Feature Paper
  • Review
  • Open Access
73 Citations
22,022 Views
27 Pages

Roll Bonding Processes: State-of-the-Art and Future Perspectives

  • Haris Ali Khan,
  • Kamran Asim,
  • Farooq Akram,
  • Asad Hameed and ,
  • Abdullah Khan and
  • Bilal Mansoor
  • + 1 author+ 0 author

25 August 2021

Roll bonding (RB) describes solid-state manufacturing processes where cold or hot rolling of plates or sheet metal is carried out for joining similar and dissimilar materials through the principle of severe plastic deformation. This review covers the...

(This article belongs to the Special Issue Design, Development and Characterization of Advanced Metallic Materials)
  • Article
  • Open Access
3 Citations
837 Views
23 Pages

Microstructure Evolution-Induced Mechanical Response in Welded Joints of 7075-T6 Aluminium Alloy Thin Sheets Subjected to Different Friction Stir Paths

  • Jiajia Yang,
  • Feifan Lv,
  • Jie Liu,
  • Xiaoping Xie and ,
  • Qing Xu,
  • Pengju Xu,
  • Zenglei Ni,
  • Yong Huang and
  • Liang Huang
  • + 4 authors+ 0 author

2 February 2026

As a solid-state joining technology, friction stir welding (FSW) exhibits significant advantages for joining aluminium alloys, including low heat input and minimal formation of intermetallic compounds, thereby enhancing joint quality and mitigating d...

(This article belongs to the Special Issue Advances in Alloy Surface Mechanics: The Effects of Coating Technologies on Performance)
  • Article
  • Open Access
872 Views
29 Pages

Effect of Lower Sheet Hole on Joint Strength in Pre-Holed Hot Clinching of Al-Si-Coated 22MnB5 Steel Sheets

  • Jarupong Charoensuk,
  • Takuma Iwai,
  • Taiga Hongo,
  • Tomoyoshi Maeno and
  • Surasak Suranuntchai

12 May 2026

This study introduced a pre-holed hot clinching process for hot stamping patchwork blanks, using the lower sheet pre-hole as a forming cavity to facilitate material flow and minimize deformation resistance. Evaluated through mechanical testing and fi...

(This article belongs to the Special Issue Advances in Welding Processes of Metallic Materials—2nd Edition)
  • Article
  • Open Access
3 Citations
2,566 Views
14 Pages

28 October 2024

Wedge wire bonding is a solid-state joining process that uses ultrasonic vibrations in combination with compression of the materials to establish an electrical connection. In the battery industry, this process is used to interconnect cylindrical batt...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
4 Citations
3,221 Views
20 Pages

Additive manufacturing of metal components is predominantly based on fusion-welding processes involving melting and solidification. However, processing high-strength aluminium alloys presents challenges, including reduced mechanical properties and in...

  • Article
  • Open Access
29 Citations
4,859 Views
20 Pages

28 December 2022

Despite the remarkable capabilities of friction stir welding (FSW) in joining dissimilar materials, the numerical simulation of FSW is predominantly limited to the joining of similar materials. The material mixing and defects’ prediction in FSW...

(This article belongs to the Section Materials Simulation and Design)
  • Article
  • Open Access
5 Citations
2,688 Views
12 Pages

Friction Welding of Polycarbonate Plate and Aluminum Foam Fabricated by Precursor Foaming Process

  • Yoshihiko Hangai,
  • Yuta Yamamoto,
  • Yu Goto,
  • Kenji Okada and
  • Nobuhiro Yoshikawa

29 July 2023

Aluminum foam is expected to be one of the candidates for lightweight materials for structural components as it is lightweight and has excellent shock absorption and sound absorption properties. However, aluminum foam has low tensile and flexural str...

(This article belongs to the Special Issue Feature Papers in Welding & Joining)
  • Article
  • Open Access
12 Citations
4,459 Views
20 Pages

Unique friction-based self-piercing riveting (F-SPR) was employed to join high-strength, low-ductility aluminum alloy 7055 for lightweight vehicle applications. This study aimed to maximize the joint strength of the AA7055 F-SPR joint while avoiding...

(This article belongs to the Special Issue Advanced Welding Processes, Additive Manufacturing and Numerical Models)
  • Article
  • Open Access
36 Citations
5,339 Views
25 Pages

Joining of Dissimilar Alloys Ti-6Al-4V and Ti-6Al-2Sn-4Zr-2Mo-0.1Si Using Linear Friction Welding

  • Sidharth Rajan,
  • Priti Wanjara,
  • Javad Gholipour and
  • Abu Syed Kabir

19 August 2020

Dissimilar joints between Ti-6Al-4V (Ti-64) and Ti-6Al-2Sn-4Zr-2Mo-0.1Si (Ti-6242) were manufactured using linear friction welding. The weld quality, in terms of the microstructure and mechanical properties, was investigated after stress relief annea...

(This article belongs to the Special Issue Structure and Mechanical Properties of Alloys)
  • Article
  • Open Access
28 Citations
2,802 Views
20 Pages

30 September 2022

Aluminum alloys have been successfully used in the railroad and automotive industries because of their potential to significantly reduce component weights, and their good mechanical and anti-corrosion properties. Problems with joining aluminum alloys...

(This article belongs to the Special Issue Welding and Fatigue of Railway Metallic Materials)
  • Article
  • Open Access
302 Views
16 Pages

23 September 2026

The evolution of microstructure and mechanical properties in electrolytic tough-pitch (ETP) copper subjected to hybrid friction welding (HFW) was investigated. The effect of introducing a programmable brake on the flywheel’s rotation while main...

(This article belongs to the Special Issue Advances in the Experimentation and Numerical Modeling of Material Joining Processes (Third Edition))
  • Article
  • Open Access
429 Views
25 Pages

30 September 2026

Ultrasound–assisted additive manufacturing forms bonds through rapid interfacial events that are difficult to observe in situ, particularly because the deposition tool moves continuously. This study presents an energy–based acoustic frame...

(This article belongs to the Special Issue Feature Papers in Physical Sensors 2026)
  • Article
  • Open Access
1 Citations
1,412 Views
32 Pages

28 March 2026

Ultra-high-strength steel sheets were joined by forge joining during hot stamping. This study investigated the influence of punch cross-sectional shape and punch tip inclination shape on joint strength through experiments and finite element simulatio...

(This article belongs to the Special Issue Advances in Welding Processes of Metallic Materials—2nd Edition)
  • Article
  • Open Access
30 Citations
6,040 Views
17 Pages

22 March 2018

Friction stir welding (FSW) was carried out for the butt joining of dissimilar AA2024-T3 and AA7050-T7651 aluminium alloys with 2-mm thicknesses. A comparison between the position and orientation of different materials was performed by varying the we...

(This article belongs to the Special Issue Friction Stir Welding and Processing in Alloy Manufacturing)
  • Review
  • Open Access
59 Citations
12,679 Views
33 Pages

Welding and Joining of Titanium Aluminides

  • Jian Cao,
  • Junlei Qi,
  • Xiaoguo Song and
  • Jicai Feng

25 June 2014

Welding and joining of titanium aluminides is the key to making them more attractive in industrial fields. The purpose of this review is to provide a comprehensive overview of recent progress in welding and joining of titanium aluminides, as well as...

(This article belongs to the Special Issue Light Alloys and Their Applications)
  • Review
  • Open Access
23 Citations
8,378 Views
31 Pages

Evaluation of Tungsten—Steel Solid-State Bonding: Options and the Role of CALPHAD to Screen Diffusion Bonding Interlayers

  • Ishtiaque Karim Robin,
  • Tim Gräning,
  • Ying Yang,
  • Syeda Bushra Haider and ,
  • Eric Andrew Lass,
  • Yutai Katoh and
  • Steven John Zinkle
  • + 2 authors+ 0 author

10 August 2023

Critical aspects of innovative design in engineering disciplines like infrastructure, transportation, and medical applications require the joining of dissimilar materials. This study investigates the literature on solid-state bonding techniques, with...

(This article belongs to the Section Welding and Joining)
  • Review
  • Open Access
1,480 Views
37 Pages

17 July 2026

Aluminum/magnesium (Al/Mg) hybrid structures are promising candidates for lightweight engineering, but reliable joining is still limited by brittle intermetallic compounds (IMCs), oxide films, pores, cracks, and corrosion-related degradation. This re...

  • Article
  • Open Access
8 Citations
4,531 Views
13 Pages

The Effect of Processing Variables on Powder Interlayer Bonding in Nickel-Based Superalloys

  • Olivia Stanners,
  • Sean John,
  • Helen M. Davies,
  • Ieuan Watkins and
  • Silvia Marchisio

29 January 2020

Powder Interlayer Bonding (PIB) has been considered as a lower-energy joining technology for nickel-based superalloys compared to conventional methods; such as friction welding. Typically; nickel-based superalloys exhibit high energy requirements for...

(This article belongs to the Special Issue Advances in Structural Metallic Systems for Gas Turbines)
  • Feature Paper
  • Article
  • Open Access
30 Citations
6,059 Views
26 Pages

14 March 2019

AddJoining is an emerging technique that combines the principles of the joining method and additive manufacturing. This technology is an alternative method to produce metal–polymer (composite) structures. Its viability was demonstrated for the...

(This article belongs to the Special Issue Metal-Polymer Multi-Material Structures and Manufacturing Techniques in Transportation)
  • Correction
  • Open Access
2,521 Views
2 Pages
  • Review
  • Open Access
12 Citations
4,680 Views
33 Pages

Critical Review on Magnetically Impelled Arc Butt Welding: Challenges, Perspectives and Industrial Applications

  • Mukti Chaturvedi,
  • Arungalai Vendan Subbiah,
  • George Simion,
  • Carmen Catalina Rusu and
  • Elena Scutelnicu

6 November 2023

Magnetically Impelled Arc Butt (MIAB) welding is a cutting-edge joining method that replaces the conventional welding procedures such as resistance, friction, flash and butt welding. It is a solid-state process that uses a rotating arc to heat up the...

(This article belongs to the Special Issue Recent Advances and Perspectives in Welding and Joining Process and Technology)
  • Editorial
  • Open Access
9 Citations
2,507 Views
2 Pages

2 January 2020

Rotary, linear, and friction stir welding of metal alloys are solid-state joining processes in which a joint between two metals can be formed by a combination of frictional heating and applied force [...]

(This article belongs to the Special Issue Recent Achievements in Rotary, Linear and Friction Stir Welding of Metals Alloys)
  • Review
  • Open Access
6 Citations
3,170 Views
109 Pages

30 December 2025

Joining technologies play a decisive role in the sustainability, circularity, and end-of-life performance of metal structures. Despite the increasing emphasis on low-impact manufacturing and Extended Producer Responsibility (EPR), the connection betw...

(This article belongs to the Section Welding and Joining)
  • Feature Paper
  • Article
  • Open Access
32 Citations
5,092 Views
14 Pages

17 March 2019

The development of lightweight hybrid metal–polymer structures has recently attracted interest from the transportation industry. Nevertheless, the possibility of joining metals and polymers or composites is still a great challenge. Friction Spo...

(This article belongs to the Special Issue Metal-Polymer Multi-Material Structures and Manufacturing Techniques in Transportation)
  • Article
  • Open Access
26 Citations
4,892 Views
13 Pages

Friction Stir Spot Welding-Brazing of Al and Hot-Dip Aluminized Ti Alloy with Zn Interlayer

  • Xingwen Zhou,
  • Yuhua Chen,
  • Shuhan Li,
  • Yongde Huang and ,
  • Kun Hao and
  • Peng Peng
  • + 1 author+ 0 author

8 November 2018

Friction stir spot welding (FSSW) of Al to Ti alloys has broad applications in the aerospace and automobile industries, while its narrow joining area limits the improvement of mechanical properties of the joint. In the current study, an Al-coating wa...

(This article belongs to the Special Issue Dissimilar Metal Welding)
  • Article
  • Open Access
16 Citations
4,898 Views
18 Pages

Fundamentals of Force-Controlled Friction Riveting: Part II—Joint Global Mechanical Performance and Energy Efficiency

  • Gonçalo Pina Cipriano,
  • Lucian A. Blaga,
  • Jorge F. Dos Santos,
  • Pedro Vilaça and
  • Sergio T. Amancio-Filho

7 December 2018

The present work investigates the correlation between energy efficiency and global mechanical performance of hybrid aluminum alloy AA2024 (polyetherimide joints), produced by force-controlled friction riveting. The combinations of parameters followed...

(This article belongs to the Special Issue Metal-Polymer Multi-Material Structures and Manufacturing Techniques in Transportation)
  • Review
  • Open Access
44 Citations
11,097 Views
20 Pages

New Approaches to Friction Stir Welding of Aluminum Light-Alloys

  • Marcello Cabibbo,
  • Archimede Forcellese,
  • Eleonora Santecchia,
  • Chiara Paoletti and ,
  • Stefano Spigarelli and
  • Michela Simoncini
  • + 1 author+ 0 author

9 February 2020

Friction stir welding (FSW) is the most widely used solid-state joining technique for light-weight plate and sheet products. This new joining technique is considered an energy-saving, environment friendly, and relatively versatile technology. FSW has...

(This article belongs to the Special Issue Friction Stir Welding Prospective on Light-Alloys Joints)
  • Review
  • Open Access
2 Citations
1,119 Views
86 Pages

Friction stir welding (FSW) began as a fairly specialized joining method, but over the past three decades it has evolved into something considerably more versatile, a manufacturing platform that now handles complex multi-material assemblies and solid...

(This article belongs to the Special Issue Recent Advances in Welding and Joining Metallic Materials)
  • Article
  • Open Access
13 Citations
5,042 Views
13 Pages

In recent decades, beam welding processes have been set up as a key technology for joining applications in automotive engineering and particularly in gearbox manufacturing. Due to their high beam quality, energy efficiency, reliability as well as fle...

  • Article
  • Open Access
2 Citations
3,700 Views
17 Pages

Solid-State Welding of the Nanostructured Ferritic Alloy 14YWT Using a Capacitive Discharge Resistance Welding Technique

  • Calvin Robert Lear,
  • Jonathan Gregory Gigax,
  • Matthew M. Schneider,
  • Todd Edward Steckley and ,
  • Thomas J. Lienert,
  • Stuart Andrew Maloy and
  • Benjamin Paul Eftink
  • + 2 authors+ 0 author

23 December 2021

Joining nanostructured ferritic alloys (NFAs) has proved challenging, as the nano-oxides that provide superior strength, creep resistance, and radiation tolerance at high temperatures tend to agglomerate, redistribute, and coarsen during conventional...

  • Article
  • Open Access
4 Citations
4,762 Views
8 Pages

23 September 2021

Joining heat conducting alloys, such as copper and its alloys, to heat resistant nickel-based superalloys has vast applications in nuclear power plants (including future fusion reactors) and liquid propellant launch vehicles. On the other hand, fusio...

(This article belongs to the Section Welding and Joining)
  • Review
  • Open Access
182 Citations
20,818 Views
28 Pages

Review of Aluminum-To-Steel Welding Technologies for Car-Body Applications

  • Alessio Gullino,
  • Paolo Matteis and
  • Fabio D’Aiuto

11 March 2019

Hybrid car bodies fabricated by joining parts made with steel and aluminum alloys are becoming increasingly common. This provides an affordable mean to decrease the car weight by using lighter or more advanced materials only where they can achieve th...

(This article belongs to the Special Issue Joining of Advanced High Strength Steels for the Automotive Industry)
  • Article
  • Open Access
14 Citations
7,358 Views
22 Pages

Fundamentals of Force-Controlled Friction Riveting: Part I—Joint Formation and Heat Development

  • Gonçalo Pina Cipriano,
  • Lucian A. Blaga,
  • Jorge F. dos Santos,
  • Pedro Vilaça and
  • Sergio T. Amancio-Filho

15 November 2018

This work presents a systematic study on the correlations between process parameters and rivet plastic deformation, produced by force-controlled friction riveting. The 5 mm diameter AA2024 rivets were joined to 13 mm, nominal thickness, polyetherimid...

(This article belongs to the Special Issue Metal-Polymer Multi-Material Structures and Manufacturing Techniques in Transportation)
  • Article
  • Open Access
20 Citations
5,811 Views
17 Pages

Tensile Strength and Microstructure of Rotary Friction-Welded Carbon Steel and Stainless Steel Joints

  • Hudiyo Firmanto,
  • Susila Candra,
  • Mochammad Arbi Hadiyat,
  • Yesa Priscilla Triastomo and
  • Ivan Wirawan

Due to the different properties of the materials, the fusion welding of dissimilar metals may be difficult. Structural irregularities may form as a result of various phase transformations during welding. Solid-state welding, as opposed to fusion weld...

  • Article
  • Open Access
11 Citations
3,471 Views
11 Pages

23 December 2022

AddJoining technique has been recently introduced to produce metal–polymer composite hybrid layered structures. The methodology combines the principles of joining and polymeric additive manufacturing. This paper presents three AddJoining proces...

(This article belongs to the Special Issue Hybrid Metal-Polymer Joints)
  • Abstract
  • Open Access
2 Citations
2,261 Views
3 Pages

Copper/Stainless Steel Friction Stir Spot Welds—Feasibility and Microstructural Analysis

  • Diogo Taborda,
  • Rui M. Leal,
  • Teresa Morgado,
  • Carlos Leitão and
  • Ivan Galvão

The possibility of using solid-state joining technologies, such as friction stir welding (FSW) and its variants, to perform dissimilar joints is one of the well know advantages of this class of processes, namely because they are impossible to be prod...

(This article belongs to the Proceedings of MATERIAIS 2022)
  • Article
  • Open Access
8 Citations
3,937 Views
16 Pages

13 October 2023

Ultrasonic spot welding (USW) represents one of the unique solid-state joining methods for lightweight materials such as magnesium alloy and aluminum alloy. However, the sonotrode vibration may have a detrimental impact on the sheet material and the...

(This article belongs to the Special Issue Feature Papers in Welding & Joining)
  • Article
  • Open Access
6 Citations
5,848 Views
18 Pages

4 March 2019

This work aims at investigating the influence of pre-set clamping pressure on the joint formation and mechanical strength of overlapping direct-friction-riveted joints. A pneumatic fixture device was developed for this work, with clamping pressure va...

(This article belongs to the Special Issue Metal-Polymer Multi-Material Structures and Manufacturing Techniques in Transportation)
  • Article
  • Open Access
33 Citations
6,430 Views
14 Pages

Microstructural Characterization and Mechanical Behavior of NiTi Shape Memory Alloys Ultrasonic Joints Using Cu Interlayer

  • Wei Zhang,
  • Sansan Ao,
  • Joao Pedro Oliveira,
  • Zhi Zeng and ,
  • Yifei Huang and
  • Zhen Luo
  • + 1 author+ 0 author

26 September 2018

NiTi shape memory alloys (SMAs) are a class of functional materials which can be significantly deformed and recover their original shape via a reversible martensitic phase transformation. Developing effective joining techniques can expand the applica...

(This article belongs to the Special Issue Welding, Joining and Coating of Metallic Materials)
  • Article
  • Open Access
9 Citations
2,688 Views
11 Pages

Friction Stir Welding of Thick Plates of 4Y3Gd Mg Alloy: An Investigation of Microstructure and Mechanical Properties

  • Khaja Moiduddin,
  • Arshad Noor Siddiquee,
  • Mustufa Haider Abidi,
  • Syed Hammad Mian and
  • Muneer Khan Mohammed

16 November 2021

Applications of non-ferrous light metal alloys are especially popular in the field of aerospace. Hence it is important to investigate their properties in joining processes such as welding. Solid state joining process such as friction stir welding (FS...

  • Article
  • Open Access
2 Citations
2,430 Views
19 Pages

Microscale Damage Evolution and Failure Behavior of Metal–Composite Friction Spot Joints: Modelling and Experimental Analyses

  • Natalia M. André,
  • Renan Pereira Alessio,
  • Jorge F. dos Santos and
  • Sergio T. Amancio-Filho

4 December 2022

This study aimed to understand the damage evolution at the interface of AA2024-T3/CF-PPS friction spot joints. For this purpose, the finite element method was applied and the bonding zones of the joints were discretized based on a traction–sepa...

(This article belongs to the Special Issue Hybrid Metal-Polymer Joints)
  • Article
  • Open Access
26 Citations
9,660 Views
16 Pages

Microstructure and Mechanical Properties of Thixowelded AISI D2 Tool Steel

  • M. N. Mohammed,
  • M. Z. Omar,
  • Salah Al-Zubaidi,
  • K. S. Alhawari and
  • M. A. Abdelgnei

4 May 2018

Rigid perpetual joining of materials is one of the main demands in most of the manufacturing and assembling industries. AISI D2 cold work tool steels is commonly known as non-weldable metal that a high quality joint of this kind of material can be ha...

(This article belongs to the Special Issue Semi-Solid Processing of Alloys and Composites)
  • Feature Paper
  • Article
  • Open Access
9 Citations
3,939 Views
17 Pages

Process-Related Changes in Polyetherimide Joined by Friction-Based Injection Clinching Joining (F-ICJ)

  • André B. Abibe,
  • Marilia Sônego,
  • Leonardo B. Canto,
  • Jorge F. dos Santos and
  • Sergio T. Amancio-Filho

25 February 2020

This work presents a comprehensive study on the effects of the Friction-based Injection Clinching Joining (F-ICJ) process on the microstructure and local properties of the stake head. The manuscript evaluates the consequences on the quasi-static mech...

(This article belongs to the Special Issue Metal-Polymer Multi-Material Structures and Manufacturing Techniques in Transportation)

of 4