The results of modeling the dynamic recrystallization of steels during hot deformation on the basis of information on their static recrystallization kinetics are presented. The results of predicting the amount of deformation accumulated in the metal...
Interrupted and continuous hot compression tests were performed for eutectoid steel over the temperature range of 850 to 1050 °C and while using strain rates of 0.001, 0.01, 0.1, and 1 s−1. The interrupted tests were carried out to characte...
Control of the material microstructure in terms of the grain size is a key component in tailoring material properties of metals and alloys and in creating functionally graded materials. To exert this control, reliable and efficient modeling and simul...
Fine-grained (average gain size 3.8 μm) and coarse-grained (average gain size 24.9 μm) Al-Zn-Mg-Cu alloys were subjected to isothermal compression at 10−3 s−1 and temperature ranges from 300 °C to 450 °C. The grain structure...
Ammonium perrhenate is widely used in alloy manufacturing, powder processing, the catalytic industry, and other fields. Recrystallization can improve the specific surface area of ammonium perrhenate, reduce its particle size, and improve its particle...
This paper considers the influence of subgrain coalescence at initial high-angle boundaries on the initiation and growth of recrystallization nuclei (subgrains) under thermomechanical treatment. With certain processing regimes, adjacent subgrains in...
The interest in the crystallography of structural transformations is driven by emerging capabilities in texture control and by the resulting anisotropy of the physical-mechanical properties of functional materials and products. The recrystallization...
This study systematically investigated the static recrystallization behavior and microstructural evolution of cold-rolled Ti-2Al-2.5Zr alloy tubes subjected to isothermal annealing at 650–800 °C. Electron backscatter diffraction (EBSD), opt...
Over the past few decades, there has been much research on additive manufacturing in both the academic and the industrial spheres to overcome the limitations of conventional manufacturing methods, thereby enabling the production of complex designs fo...
Matrix microstructure and texture controlling is an important way to optimize Goss ({110}<001>) abnormal grain growth (AGG) in high magnetic induction grain-oriented silicon (Hi-B) steel during primary recrystallization. In the present work, a...
Static recrystallization is a method of tailoring the microstructure and mechanical properties of steels, which is important for microalloyed forging steels as the hot deformation process significantly affects their mechanical properties. In this pap...
The evolution of microstructures during the hot working of metallic materials determines their workability and properties. Recrystallization is an important softening mechanism in material forming that has been extensively researched in recent decade...
Recrystallization kinetics and two critical temperatures—the non-recrystallization temperature TNR and the static recrystallization critical temperature TSRCT—of five Nb, Ti, and V microalloyed steel grades are evaluated. The experimental...
As Ti-70 is a new type of marine titanium alloy, research on the recrystallization process of its sheet is necessary. This article studies the effects of different temperatures and times of annealing on the recrystallization process of 5.0 mm thick T...
Two ensemble configurations were designed to investigate the intrinsic effect of a pulsed current on the recrystallization of rolled AZ31 alloy. The samples with a total reduction of about 60% were crystallized at 473K for 5 min when treated with the...
Thermomechanical processes, such as forging, are important steps during manufacturing of superalloy components. The microstructural development during processing, which controls the final component properties, is complex and depends on e.g., applied...
Dynamic recrystallization is one of the main phenomena responsible for microstructure evolution during hot forming. Consequently, obtaining a better understanding of dynamic recrystallization mechanisms and being able to predict them is crucial. This...
Revealing the recrystallization behavior and mechanism of this new alloy is of great significance to subsequent research. In this study, the Ni-36.6W-15Co ternary medium heavy alloy was solution-treated at 1100–1200 °C for different lengths...
The flow stress and dynamic recrystallization behavior of A356 aluminum alloy was studied, with a strain rate ranging from 0.001 s−1 to 1 s−1 and temperature ranging from 300 to 500 °C. Both the true stress–strain curves and mic...
High-temperature compression and electron backscatter diffraction (EBSD) techniques were used in a systematic investigation of the dynamic recrystallization (DRX) behavior and texture evolution of the Inconel625 alloy. The true stress–true strain cur...
Thermal barrier coatings (TBCs) are widely used to protect high-temperature components against harsh environments, such as extremely high temperatures. In this work, a second generation Ni-based single crystal superalloy (DD6) was treated in two ways...
The tensile deformation behavior of double-forged (DF-W) and recrystallized (RX-W) commercial-grade tungsten was investigated at 700 °C. With increasing strain rate, the dominant dynamic recrystallization (DRX) mechanism changes from continuous d...
Li2CO3 with high purity is an important raw material for the fabrication of lithium rechargeable batteries. This paper reports a facile recrystallization way to produce Li2CO3 with high purity from commercial Li2CO3 containing 0.8 wt % of SO42− by th...
The Silicon on Dust Substrate (SDS) is a gas-to-wafer process that produces multicrystalline silicon ribbons directly from gaseous feedstock (silane), avoiding the standard industry steps of polysilicon deposition, crystal growth, and wafering. The S...
The microstructure of and damage to the upper divertor components in EAST were characterized by using metallography, EBSD, and SEM. Under the synergistic effect of heat load and plasma irradiation, cracking, recrystallization, and interface debonding...
In order to study the metadynamic recrystallization behavior of 34CrNi3MoV steel, a double-pass isothermal compression experiment and a single-pass thermal interval experiment were designed and conducted to obtain the stress–strain curves under...
Three-dimensional metal waveguide components are key components in the next generation of radio telescopes. Ultrasonic additive manufacturing technology combining ultrasonic welding and micro electrical discharge machining (micro-EDM) provides a new...
An original mean field model for the nucleation and the growth of new recrystallized grains during annealing treatments of deformed, low-carbon ferritic steels is proposed in this paper. The model was calibrated on two steels extensively studied in t...
Sub-solvus dynamic recrystallization (DRX) mechanisms in an advanced γ-γ’ nickel-based superalloy GH4151 were investigated by isothermal compression experiments at 1040 °C with a strain rate of 0.1 s−1 and various true str...
An isothermal hot compression test of GH3230 was carried out under deformation conditions with deformation temperatures ranging from 1020 to 1110 °C and strain rates ranging from 1 to 0.001 s−1. On this basis, the corresponding constitutive...
The control of recrystallization in submillimeter-gauge electromagnetic pure iron strips is critical for developing high-sensitivity electromagnetic devices, yet the microstructure–property relationship during annealing remains poorly understoo...
The melting and recrystallization behaviors of poly(butylene terephthalate) (PBT) were investigated using temperature-modulated scanning calorimetry in both fast- and conventional slow-scan modes. With this method, the response of multiple transition...
Recrystallization is an important diagenetic process that widely occurs in carbonate rocks as a result of increasing temperature and pressure during burial. Exploration has revealed that carbonate rocks affected by recrystallization vary in their res...
The global drive toward decarbonization has spurred industry interest in the compact steel production (CSP) process for manufacturing automotive steel sheets. Understanding the hot deformation behavior, particularly the metadynamic softening mechanis...
The superplastic deformation of a hot-extruded GH4151 billet was investigated by means of tensile tests with the strain rates of 10−4 s−1, 5 × 10−4 s−1 and 10−3 s−1 and at temperatures at 1060 °C, 1080 &d...
Multiple hot-compression tests were carried out on the 6082 aluminum (Al) alloy using a Gleeble-1500 thermal simulation testing machine. Data on flow stresses of the 6082 Al alloy at deformation temperatures of 623 to 773 K and strain rates from 0.01...
This paper investigates softening phenomena within the post-dynamic recrystallization (PDRX) process in 300M high-strength steel specimens with different initial dynamically recrystallized volume fractions. Isothermal, interrupted compression experim...
Single-crystalline VO2 microtube arrays on V2O5 substrate were fabricated through a thermal oxidation route based on resistive heating V foil in air. Four sheets of as-fabricated single-crystalline VO2 microtube arrays on V2O5 substrate were then, re...
In this paper, the dependence of dynamic recrystallization (DRX) and post-dynamic recrystallization (PDRX) of TC18 alloy on strain rate within the range of 0.001 s−1~1 s−1 was investigated through isothermal compression and subsequent ann...
This manuscript studied the effect of counterion on the glass transition and recrystallization behavior of amorphous salts of prazosin. Three amorphous salts of prazosin, namely, prazosin hydrochloride, prazosin mesylate and prazosin tosylate were pr...
Ferritic alloys are important for nuclear reactor applications due to their microstructural stability, corrosion resistance, and favorable mechanical properties. Nanostructured ferritic alloys having a high density of Y-Ti-O rich nano-oxides (NOs <...
Physical mechanism for dynamic recrystallization of NiTi shape memory alloy subjected to local canning compression at various temperatures, 600, 700 and 800 °C, was investigated via electron backscattered diffraction experiments and transmission elec...
Microstructure evolution within the post-dynamic regime following hot deformation was investigated in Inconel 718 samples with different dynamically recrystallized volume fractions and under conditions such that no δ-phase particles were present. In...
Austenitic Stainless Steels and High-Strength Low-Alloy (HSLA) steels show significant dynamic recovery and dynamic recrystallization (DRX) during hot forming. In order to design optimal and safe hot-formed products, a good understanding and constitu...
In recent years, ultrafine-grained steel has been gaining increasing attention as a high-performance material. Accordingly, it is necessary to develop an efficient production method for ultrafine-grained steel. Severe plastic deformation is a critica...
The recrystallization (RX) kinetics of commercially pure Al alloy is studied under the scope of annealing temperature, time, and degree of deformation. To examine the distribution of recrystallization, Johnson–Mehl–Avrami–Kolmogorov...
In this study, 48 hot-rolling processing conditions were designed to investigate the influences of thermomechanical processing parameters on the recrystallization behavior and texture development. The hot-rolling experiments were conducted using the...
There is increasing usage of high strength Beta Ti alloy in aerospace components. However, one of the major challenges is to obtain homogeneous refined microstructures via the thermo-mechanical processing. To overcome this issue, an understanding of...
The “electron wind effect” has long been cited as a potential catalyst of solid-state transformations in metals, particularly when high current densities are involved. However, the literature exploring similar effects at lower current den...
The dynamic recrystallization behavior of ultra-high strength boron-microalloyed steels optionally alloyed with niobium and molybdenum is analyzed in this paper. Multipass torsion tests were performed to simulate plate rolling conditions followed by...
of 54