The R23Cu7Mg4 (R = Ca, Eu) intermetallics, studied by single-crystal X-ray diffraction, were found to be isostructural with the Yb23Cu7Mg4 prototype (hP68, k4h2fca, space group P63/mmc), forming a small group inside the bigger 23:7:4 family, otherwis...
Several ternary rare-earth metals containing titanium aluminum intermetallics in the RE2TiAl3 series (RE = Y, Gd–Lu) have been synthesized from the elements using arc-melting techniques. All compounds crystallize in the trigonal crystal system...
This review discusses the properties of candidate compounds for semi-hard and hard magnetic applications. Their general formula is R1−sT5+2s with R = rare earth, T = transition metal and 0≤s≤0.5 and among them, the focus will be on the Th...
This study explores the structural, magnetic, and magnetocaloric properties of Ce2(Fe, Co)17 (x = 0, 0.5, 0.6, and 0.7) compounds synthesized via arc melting under high temperatures exceeding 2300 K. The as-cast ingots are subsequently sealed and sub...
Rare-earth intermetallic compounds are characterised by the presence of a long-range magnetic order due to the interaction of local magnetic moments periodically located within the crystal lattice. This paper considers the possibility of forming an o...
The present study was performed on A356 alloy [Al-7 wt %Si 0.0.35 wt %Mg]. To that La and Ce were added individually or combined up to 1.5 wt % each. The results show that these rare earth elements affect only the alloy melting temperature with no ma...
Aimed at improving the tensile strength and creep resistance of a rare earth-modified A356 alloy, this study adjusted the Mg and Mn concentration in the alloy, specifically aiming to transform the harmful Al5FeSi and Al9FeSi3Mg5 phase into Al15(Fe,Mn...
We study the structural, magnetic, and magneto-thermal properties of the GdRhIn compound. The room-temperature X-ray diffraction measurements show a hexagonal crystal structure. Temperature and field dependence of magnetization suggest two magnetic t...
The effects of adding different Ce contents (0–0.32 wt.%) on the microstructure, mechanical properties, and fracture morphology of industrial A357 cast alloy in as-cast and T6 heat treatment were studied. The main purpose of this study is to im...
Ni3Sn4 intermetallic compound (IMC) is a critical material in modern electronic packaging and soldering technology. Although Ni3Sn4 enhances the strength of solder joints, its brittleness and anisotropy make it prone to crack formation under mechanic...
By computational high-throughput screening, the spontaneous magnetization M s , uniaxial magnetocrystalline anisotropy constant K 1 , anisotropy field H a , and maximum energy product ( B H ) max are estimated for ferro...
In this study, we investigate the crystal structure, magnetic, and magnetocaloric effect properties in the intermetallic compounds SmNi3−xFex using a phenomenological model based on Landau mean-field theory and Maxwell relation (conventional me...
The present paper is devoted to the study of the processes of the mechanism of electrochemical coreduction of Dy3+ and Nd3+ ions with Ni2+, Co2+, and Fe3+ ions in the equimolar NaCl-KCl melt at 973 K and characterization of the synthesized samples. T...
In recent years, significant effort was made to make the 3D printing of fully dense rare-earth permanent magnets a reality. Since suitable Nd2Fe14B-based initial powder material became available, additive manufacturing implementation spread widely, w...
Magnetic nanocomposites SmCo5/α-Fe were synthesized mechanically by high-energy ball milling (HEBM) from SmCo5 and 5%wt. of α-Fe powders. The X-ray diffraction analysis reveals the hexagonal 1:5 phase as the main one accompanied by the cubic α-Fe pha...
In this work the magnetocaloric effect in the TbCo2-H system in the region of the Curie temperature was studied both by direct and indirect methods in external magnetic fields up to ~1.4 and 14 T, respectively. We have paid special attention to the m...
We demonstrate the peculiarities of the magnetization process in the ferrimagnetic intermetallic compound (Nd0.5Dy0.5)2Fe14B, which has been studied theoretically and experimentally using ultrahigh magnetic fields. We observe phase transition induced...
Liquid phase segregation of immiscible alloys has been investigated for decades. In this work, rare-earth Ce was studied as an additive for Al-Bi immiscible alloys. The addition of Ce restrained liquid phase segregation to obtain a uniformly dispersi...
A series of GdCu 2 nanoparticles with controlled sizes ranging from 7 nm to 40 nm has been produced via high-energy inert-gas ball milling. Rietveld refinements on the X-ray diffraction measurements ensure that the bulk crystalline I m m...
Low-temperature crystal structure of the ErxDy1−xAl2 alloys with x = 0.45, 0.67, 0.90 was examined using temperature-dependent powder X-ray diffraction. The Er-rich sample, Er0.9Dy0.1Al2, exhibits a rhombohedral distortion associated with the m...
The current study focusses on the phase composition, solidification path, and microstructure evaluation of gravity cast Al-4Mg-0.5Si-xLa aluminum alloy, where x = 0, 0.1, 0.25, 0.5, 0.75, and 1 wt.% La. A computational CalPhaD approach implemented in...
The structural, magnetic, and magnetocaloric properties of Er6Fe23−xAlx (x = 0 and 3) intermetallic compounds have been studied systematically. Samples were prepared using the arc furnace by annealing at 1073 K for one week. Rietveld analysis of XRD...
The electrochemical reduction of pelleted heterophase powder Pd-Nd2O3-CeO2 mixtures was studied in molten LiCl-Li2O (1–1.5 wt%) at 650 °C. The influence of the composition of the mixture, as well as electrochemical factors—i.e., the a...
Volumetric cubic and cylindrical samples from MQP-S Nd-Fe-B-type material were 3D-printed using the LPBF technique. Two different scanning strategies were used: the convenient single laser exposure scanning strategy and the newly proposed double scan...
We report the electronic properties of R4PtAl (R = Ho, and Er), which contains three sites for R, by the measurements of magnetization (ac and dc), heat-capacity, transport, and magnetoresistance (MR). Dc magnetization data reveal antiferromagnetic o...
NiAl coatings are critical for protecting components in high-temperature environments. In order to improve the mechanical properties of NiAl coatings, in this study, the elastic and electronic properties of NiAl coatings alloyed with different conten...
Liquid metal extraction (LME) for recycling rare-earth elements from magnets is studied, in the present study, to examine its suitability as an environmentally friendly alternative for a circular economy. While Nd (neodymium) extraction efficiency ca...
The use of silicon carbide particles (SiCp) as reinforcement in aluminium (Al)-based composites (Al/SiCp) can offer high hardness and high stiffness. The rare-earth elements like lanthanum (La) and cerium (Ce) and transition metals like nickel (Ni) a...
In this study, the ab initio and experimental results for RCuGe ternary intermetallics were reported for R = Tb, Dy, Ho, Er. Our theoretical calculations of the electronic structure, employing local spin density approximation accounting for electron&...
The rare-earth magnetism in the intermetallic compound Yb0.5Ce0.5Ni5 was studied using X-ray diffraction, magnetization, heat capacity, and electrical resistivity measurements. The effect of spin fluctuations (SF) was observed in M(T) at ~40 K. The m...
The Ce2Fe14B intermetallic, like Nd2Fe14B, has the tetragonal Nd2Fe14B-type structure (space group P42/mnm), in which Ce ions have a mixed-valence state characterized by the coexistence of trivalent 4f1 and tetravalent 4f0 electron states. Despite th...
Thermal conductivity and phase identification of Mg-RE (Rare-Earth) alloy (Mg-La, Mg-Ce, Mg-Nd, Mg-Sm) in both as-cast and annealed states were investigated. The thermal conductivity was measured by the laser flash method in the composition range of...
A newly developed Mg-2Gd-0.5Zr-xZn (x = 0.5, 1.0, 2.0, 3.0 wt %) alloy system exhibits significant strengthening by doping with Zn. In order to understand the strengthening mechanism, the microstructure, texture evolution, and mechanical properties o...
This study systematically examines the influence of heat treatment on the microstructure and mechanical properties of the Mg-3.2Nd-2.5Gd-0.4Zn-0.5Zr (wt.%) alloy using optical microscopy (OM), scanning electron microscopy (SEM), transmission electron...
The phenomenon of high-temperature oxidation in magnesium alloys constitutes a significant obstacle to their application in the aerospace field. However, the incorporation of active elements such as alloys and rare earth elements into magnesium alloy...
Recently, potential technological interest has been revealed for the production of magnetocaloric alloys using Rare-Earth intermetallics. In this work, three series of TbxR1−xCu2 (R ≡ Gd, La, Y) alloys have been produced in bulk and nanop...
Magnetic intermetallic compounds based on rare earth elements and 3d transition metals are widely investigated due to the functionality of their physical properties and their variety of possible applications. In this work, we investigated the feature...
Four polar intermetallic compounds belonging to the RE2In1−xLixGe2 (RE = La, Nd, Sm, Gd; x = 0.13(1), 0.28(1), 0.43(1), 0.53(1)) system have been synthesized by the traditional solid-state reaction method, and their crystal structures have been chara...
The current study of Al alloys aims to improve their high-temperature mechanical properties by forming intermetallic precipitates with high-temperature stability. Using rare earth elements (RE) to achieve this goal increases the production cost and,...
It is well known that the microstructure distribution in recycled Al-Si alloys has a large impact on the final mechanical properties. In this study, the microstructure, including Fe-rich intermetallics and microporosity, was quantitatively adjusted u...
Aluminum master alloys with rare earth metals are widely studied by many scientists around the world, but research on the production of Al-Er master alloys is still limited. The purpose of this work is to study the microstructure parameters of alumin...
Samarium, a rare earth element, is crucial for advanced technological applications, particularly due to the exceptional magnetic properties of SmxCoy intermetallics, discovered over 50 years ago. However, its growing significance and demand have high...
The alloys that crystallize in a tetragonal ThMn12-type (space group I4/mmm) structure and are based on Fe and rare earth elements are believed to have a potential to plug the performance gap between ferrite and Nd-based magnets. Nevertheless, the pr...
In this study, two novel Lu5Pd4Ge8 and Lu3Pd4Ge4 polar intermetallics were prepared by direct synthesis of pure constituents. Their crystal structures were determined by single crystal X-ray diffraction analysis: Lu5Pd4Ge8 is monoclinic, P21/m, mP34,...
Modern magnesium-based alloys are broadly used in various industries as well as for biodegradable medical implants due to their exceptional combination of light weight, strength, and plasticity. The studied ZEK100 alloy had a nominal composition of 1...
Intermetallic compounds are key materials for energy transition as they form reversible hydrides that can be used for solid state hydrogen storage or as anodes in batteries. ABy compounds (A = Rare Earth (RE); B = transition metal; 2 < y < 5) a...
Aluminum is a critical element of the circular economy as it can be recycled several times. Moreover, Al recycling is a more economically and environmentally efficient procedure than the primary Al production from ores. Secondary aluminum alloys are...
RNiSb intermetallics are composed of R-rare earth, T-transition metals, and X-p elements. This family of compounds demonstrates many outstanding properties and phenomena perspectives in functional applications. The intermetallic compounds are crystal...
In this study, lanthanum (La), a rare earth element, was added at concentrations of 0.25 wt.%, 0.5 wt.%, and 0.75 wt.% to an Al–10%Si–2%Cu-based alloy prepared by die casting. The effects of solution and aging heat treatment conditions on...
Magnesium-based alloys are highly sought after in the industry due to their lightweight and reliable strength. However, the hexagonal crystal structure of magnesium results in the mechanical properties’ anisotropy. This anisotropy is effectivel...
of 2