This study investigates methods to enhance the efficiency of CO2 capture using organic amine absorption and compares the performance of traditional and novel amine solvents. It reviews various single-component and mixed amine absorbents, as well as c...
Recently, catalysts with hydrotalcites and hydrotalcite-derived compounds have attracted particular interest due to their specific properties, mostly well-developed texture, high thermal stability, and favorable acid–base properties. In this wo...
The demand for 1,3-butadiene, one of the most important raw materials in the rubber industry, is constantly increasing. The Lebedev process is a classical method of producing 1,3-butadiene from ethanol, which is to be optimized with regard to the mix...
The critical problem arising from the depletion of fossil fuels has stimulated recent interests in alternative sources for petroleum-based fuel. An alternative fuel should be technically feasible, readily available, sustainable, and techno-economical...
Catalytic total oxidation is an effective technique for the treatment of industrial VOCs principally resulting from industrial processes using solvents, and usually containing mono-aromatics (BTEX) and oxygenated compounds (acetone, ethanol, butanone...
A novel design of combustion catalysts is proposed, in which clay/TiO2/MnAl-mixed oxide composites are formed by intermixing exfoliated organo-montmorillonite with oxide precursors (hydrotalcite-like in the case of Mn-Al oxide) obtained by an inverse...
Cu–Mn mixed oxides are well known as active combustion catalysts. The common method for their synthesis is based on co-precipitation, with NaOH as a precipitant, and is burdened with the possibility of introducing undesired Na contamination. Th...
Biomass valorization to building block chemicals in food and pharmaceutical industries has tremendously gained attention. To produce monophenolic compounds from palm empty fruit bunch (EFB), EFB was subjected to alkaline hydrothermal extraction using...
Ni-based catalysts supported on Mg-Al mixed oxides (Mg(Al)O) have been intensively investigated as catalysts for CH4 reforming processes (i.e., steam reforming (SMR) and dry reforming (DRM)), which are pivotal actors in the expanding H2 economy. In t...
A series of M(x)CoCeMgAlO mixed oxides with different transition metals (M = Cu, Fe, Mn, and Ni) with an M content x = 3 at. %, and another series of Fe(x)CoCeMgAlO mixed oxides with Fe contents x ranging from 1 to 9 at. % with respect to cations, wh...
To improve the catalytic performance of an active layered double hydroxide (LDH)-derived CuCeMgAlO mixed oxide catalyst in the total oxidation of methane, it was promoted with different transition-metal cations. Thus, two series of multicationic mixe...
CuO/ZnO/ZrO2 catalyst systems were synthesized in different ways and comprehensively characterized in order to study synthesis-to-property relations. A series of catalyst samples was prepared by coprecipitation, one-pot synthesis, and wet impregnatio...
Catalytic conversion of ethanol to 1-butanol was studied over MgO–Al2O3 mixed oxide-based catalysts. Relationships between acid-base and catalytic properties and the effect of active metal on the hydrogen transfer reaction steps were investigat...
In this paper, we present a versatile template-directed colloidal self-assembly method for the fabrication in aqueous phase of composition-tuned mesoporous RuO2@TiO2-SiO2 catalysts. Randomly methylated β-cyclodextrin/Pluronic F127 supramolecular asse...
Catalytic upgrading of bioethanol via a C–C coupling reaction is a sustainable method of producing 1-butanol, a high-performance biofuel. This reaction was studied using a flow-through microreactor system with Pd/MgO-Al2O3 and bimetallic Pd-Cu/...
Iron oxides are widely used as catalysts for photo-Fenton-like processes for dye oxidation. In this study, we report on the synthesis of an α/γ-Fe2O3 mixed-phase catalyst with magnetic properties for efficient separation. The catalyst was...
This article reveals the effects of mixed activators on ethylene polymerization and ethylene/1-hexene copolymerization over MgCl2/SiO2-supported Ziegler-Natta (ZN) catalysts. First, the conventional ZN catalyst was prepared with SiO2 addition. Then,...
Traditional methods for synthesizing single-site catalysts are typically complicated and require special chemicals due to their tendency to agglomerate. In this study, we present a self-disperse copper-based catalyst synthesized via a dry mixing meth...
Catalyst-type mixed metal oxides with different compositions and Co/Fe ratios were obtained from layered double hydroxides to be used as heterogeneous catalysts in the production of biodiesel. The effect of the Co/Fe ratio on the precursors of the ca...
A series of supports were prepared through the method of hydrothermal synthesis, and copper–iron catalysts supported on ceria nanorods modified by different amounts of manganese were prepared by the liquid phase co-reduction method. The effect...
Composites of Laponite and Cu–Mn hopcalite-related mixed oxides, prepared from hydrotalcite-like (Htlc) precursors obtained in inverse microemulsions, were synthesized and characterized with XRF, XRD, SEM, TEM, H2 temperature-programmed reducti...
Large-scale recycling of new industrial wastes or by-products in concrete has become a crucial issue for construction materials sustainability, with impact in the three pillars (environmental, social and economic), while still maintaining satisfactor...
Herein, we synthesize the Ni-doped Mo2C catalysts by a one-pot preparation method to illuminate the effect of the number of carbon atoms in Mo2C lattice on CO hydrogenation to mixed alcohol. The Ni doping inhibits the agglomeration of Mo2C crystals i...
Noble metal-free catalysts based on earth-abundant and inexpensive mixed oxides are active catalysts of all steps of the reaction cascade leading from 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA) using tert-butyl hydroperoxide (...
Catalytic CO2 methanation represents a promising process route for converting carbon dioxide into methane, a valuable energy carrier. This study investigates the performance of Ni-based catalysts on mixed silica and MgO support materials for CO2 meth...
In this study, three types of Nasicon-type materials, Co3(PO4)2-CO2P2O7, Ni3(PO4)2-Ni2P2O7, and Cu3(PO4)2-Cu2P2O7, were synthesized as mixed-phase catalysts (MPCs) for evaluating their potential as new photocatalytic candidates (called Co3(PO4)2-CO2P...
This work investigated the influence of the catalytic support precursor on the activity of nickel catalysts 20%Ni/5%La2O3–95%Al2O3 in the mixed methane reforming process. The activity tests were carried out at a temperature of 750 °C. The r...
The effect of gold presence on carbon monoxide oxidation and ethanol steam reforming catalytic behavior of two Ce-Zr-Co mixed oxides catalysts with a constant Co charge and different Ce/Zr ratios was investigated. The Ce-Zr-Co mixed oxides were obtai...
Catalysts based on CoCuMgAl mixed oxides were synthesized and studied in the hydrogenations of furfural and 5-hydroxymethylfurfural under different conditions. The changes in the structural properties of the catalysts at different stages of their pre...
The production of vanillin from lignin-derived vanillyl alcohol poses a great deal of research interest because of the availability of renewable lignin in abundant quantities. In the present study, a series of copper-doped ceria (CeO2) catalysts were...
The Pd and Pd-Cu on alumina catalysts were tested for hydrogenation of vinyl acetylene in mixed C4 in a circulating tubular reactor. The results showed that adding proper amounts of Cu improved the reaction activity, but inhibited 1,3-butadiene selec...
Mixed metal oxides are promising heterogeneous catalysts for biofuel production from lipids via alcoholysis, however, the impact of solid acidity and/or basicity on reactivity is comparatively poorly understood. Two systematically related families of...
This short review reports on spinel-type mixed oxides as catalysts for the transformation of biomass-derived building blocks into chemicals and fuel additives. After an overview of the various methods reported in the literature for the synthesis of m...
Acid–base M2+MgAlO and M2+AlO mixed oxides (where M2+ = Mg, Cu, Co, Zn, and Ni) were obtained by thermal decomposition of the corresponding layered double hydroxide (LDH) precursors and used as catalysts for cyclohexanol and benzaldehyde conden...
V-containing mixed oxide catalytic materials are well known as active for partial oxidation reactions. Oxidation reactions are used in industrial chemistry and for the abatement of pollutants. An analysis of the literature in this field during the pa...
Ethanol upgrading via catalytic C–C coupling, commonly known as the Guerbet reaction, offers a sustainable route to produce 1-butanol, a high-performance biofuel. To address gaps in the mechanistic understanding of the catalytic reaction, we in...
A set of ex-ZnAl-LDHs catalysts with a molar ratio of Zn/Al in the range of 0.3–1.0 was prepared using co-precipitation and thermal treatment. The samples were characterized using various methods, including X-ray fluorescence spectroscopy (XRF)...
The acceptor properties of mixed chlorometallate ionic liquids for isobutane-butene alkylation (C4 alkylation) reaction were studied. These ionic liquids were prepared by mixing metal chlorides with either triethylamine hydrochloride or 1-butyl-3-met...
Iron-manganese mixed metal oxide catalysts with a range of Fe:Mn ratios were synthesised by co-precipitation using sodium carbonate and evaluated for total propane oxidation. The Fe0.50Mn0.50Ox catalyst was the most active, and this was due to increa...
The catalytic performance of Mo8V2Nb1-based mixed-oxide catalysts for ethane partial oxidation is highly sensitive to the doping of elements with redox and acid functionality. Specifically, control over product distributions to ethylene and acetic ac...
The development of green and sustainable materials for use as heterogeneous catalysts is a growing area of research in chemistry. In this paper, mesoporous SiO2-Al2O3 mixed oxide catalysts with different Si/Al ratios were prepared via hydrolytic (HSG...
The present work aims to synthesize trimetallic catalysts supported on mixed oxides such as Al2O3-TiO2. These mixed oxides have been synthesized via the hydrothermal method, which enables us to determine the favorable textural properties that facilit...
H2 production through dry reforming of methane (DRM) is a hot topic amidst growing environmental and atom-economy concerns. Loading Ni-based reducible mixed oxide systems onto a thermally stable support is a reliable approach for obtaining catalysts...
In the present study CeO2, MnO2 and CeMnOx mixed oxide (with molar ratio Ce/Mn = 1) were prepared by sol-gel method using citric acid as a chelating agent and calcined at 500 °C. The silver catalysts (1 wt.% Ag) over the obtained supports were sy...
Recently, Pd catalysts supported on magnetic nanoparticles (MNPs) have attracted a great attention due to their ability of easy separation with an external magnet. Modification of MNPs is successfully used to obtain Pd magnetic catalysts with enhance...
A set of ceria-manganese mixed metal oxide catalysts with varying Ce:Mn ratios were prepared by coprecipitation using sodium carbonate and were evaluated for the total oxidation of propane and naphthalene. Manganese-rich samples were the most active,...
The effect of the Pt–Sn/α-Al2O3 catalyst reduction method on dehydrogenation of mixed-light paraffins to olefins has been studied in this work. Pt–Sn/α-Al2O3 catalysts were prepared by two different methods: (a) liquid phase r...
The global trend in restrictions on pollutant emissions requires the use of catalytic converters in the automotive industry. Noble metals belonging to the platinum group metals (PGMs, platinum, palladium, and rhodium) are currently used for autocatal...
Single phase CuCoMgAl-layered hydroxides were obtained by making fine adjustment to their composition through changing the (Co + Cu)/Mg = 0.5; 1; 2; 3 and Co/Cu = 0.5; 1; 2 ratios. The rise of Co/Cu in systems contributed to the increase in their the...
Ni-Mg/Al mixed oxide catalysts (Ni2Al, Ni2Mg1Al, and Ni1Mg1Al) obtained from layered double hydroxides (LDHs) were tested on the one-pot production of tetrahydrofurfuryl alcohol (TFA) from furfural (FF). Upon calcination at 400 °C and reduction a...
of 20