This study aimed to establish the suitability of new Croatian wheat varieties for the production of pale wheat malt. Four new varieties/breeding lines from the Agricultural Institute Osijek were tested (Indira, OSK. 378/19, OSK. 346/20, and OSK. 353/...
The phenolic content and antioxidant potential of malting barley are important in brewing. The objective of our study was to investigate the effects of barley genotype, growing environment, and malting conditions on the total phenolic content and ant...
The aim of this study was to assess the impact of steeping water change and Fusarium graminearum contamination level on different multi-toxin types and concentrations in barley malt. Malt samples were subjected to two micromalting regimes—steep...
Barley rootlets are the most abundant by-product from the malting industry. Due to the inherent association of the malting industry with brewing and distilling industries, it is also considered a by-product of these industries. Barley rootlets are pr...
This paper examines the influence of the malting process of red hard wheat varieties (which have many characteristics of soft wheat varieties and represent a transitional form between durum and soft wheat). According to the values of total and solubl...
This paper examines the influence of malting process parameters on the wheat malt quality obtained from the assortment of winter red wheat. For this assortment, previous research established that strongly restrictive and strongly intensive malting pr...
Nineteen globally diverse rice cultivars were analyzed for various chemical parameters important to malting, including germination energy, protein, apparent amylose content, and gelatinization temperatures (GT). The rice cultivars were then malted, a...
The transformation of deoxynivalenol (DON), nivalenol (NIV), and their glucosides (DON3G and NIV3G) during the malting of grains of two wheat varieties was studied. The concentration of DON3G and NIV3G started to increase significantly before the con...
There have been tremendous marketing efforts and consumer interest in the so-called ancient grains. Einkorn, emmer and spelt, which are sometimes referred to as ancient wheats, are frequently included in this category, and have gained some attention...
Fungi, yeasts, and bacteria are common microorganisms on cereals used in malting and brewing industries. These microorganisms are mostly associated with the safety and quality of malt and beer, but also with the health safety of by-products used in a...
Malting of rye and the use of rye malts presents several challenges to maltsters and brewers, like the lack of a hull, dense packing in steep, and high wort viscosity. While empirical evidence shows that rye genotypes differ in malting and brewing pe...
Mycotoxins are widely studied by many research groups in all aspects, but the stability of these compounds needs further research for clarification. The objective of this study is to evaluate deoxynivalenol and zearalenone stability during all steps...
This study was aimed at minimizing the anti-nutrient content of the Gradoli Purgatory bean (GPB: Phaseolus vulgaris) and Solco Dritto chickpea (SDC: Cicer arietinum) seeds grown in the Latium region of Italy by defining the three steps of their malti...
This paper aimed to compare the quality indicators of hull-less (naked) barley malt with malt obtained from hulled barley, according to the recommended values for standard pale malt. Five domestic hull-less barley varieties (Osvit, Mandatar, GZ-184,...
Hemp (Cannabis sativa L.) seeds are an interesting raw material for malting regarding its relatively high bioactive compounds concentration and proven advantageous properties in different food products and dietary supplements. In the first stage of t...
Sorghum (Sorghum bicolor) grain contains many health-promoting phytochemicals, including a broad range of phenolic compounds. Malting of cereal grains is known to increase the bioavailability of macro- and micronutrients. However, the detailed effect...
In the grain samples of three malting barley varieties harvested in 2016, and in the malt made from them, we observed microbial changes during storage. Analyses were performed after 0, 3, 6, and 9 months of storage in floor warehouses and silos. We m...
Malting is a sustainable, low-cost, and adaptable technique that enhances the nutritional and functional value of cereals while contributing to waste reduction, improved food safety, and the valorization of brewing by-products such as brewers’...
This project was initiated with the goal of investigating the malt quality of winter rye cultivars and hybrids grown in the United States in 2014 and 2015, but high levels of deoxynivalenol (DON) were subsequently found in many of the malt samples. D...
Microalgae have the potential to grow in nutrient-rich environments and have the ability to accumulate nutrients from wastewater. The nutrients in malting wastewater are ideal for microalgae cultivation. However, there is limited published work on th...
There is growing interest in malting barley (Hordeum vulgare L.) production in the Northeastern United States. This crop must meet high quality standards for malting but can command a high price if these quality thresholds are met. A two-year field e...
Image analysis using neural modeling is one of the most dynamically developing methods employing artificial intelligence. The feature that caused such widespread use of this technique is mostly the ability of automatic generalization of scientific kn...
Cultivation of malting barley is particularly challenging as the requirements of growers, for high yield, and that of the brewing industry, seeking a specific quality criteria, must be met simultaneously. Furthermore, significant genotypic and enviro...
This study investigated the impact of malting of six wheat cultivars inoculated with Fusarium culmorum on the dynamics of content changes of selected Fusarium toxins. The grains of all the tested cultivars showed a high content of deoxynivalenol (DON...
Quality evaluation of products is a critical stage in the process of production. It also applies to the production of beer and its main ingredients, i.e., hops, yeast, malting barley and other components. The research described in this paper deals wi...
There are many Fusarium graminearum contaminations in barley that are often associated with malt and beer quality issues. Thus, it is important to find a biological antifungal agent to prevent the growth of F. graminearum during malting. Minimum inhi...
The increasing contamination of cereals by micromycetes and mycotoxins during malting still poses an unresolved food safety problem. This study characterises the potential of the novel, rapidly developing food production technology of Pulsed Electric...
Differentiating agricultural products has been adopted as a strategy to improve farm profitability and thereby business sustainability. This study aimed to evaluate unique barley varieties for craft malting and brewing markets to enhance profitabilit...
Versatile microbiota are inevitably naturally present on cereals. Fungi, yeasts and bacteria and their metabolites all contribute to the quality and safety of the final products derived from most common beer cereals—barley and wheat. The microorganis...
This study used the process of vacuum impregnation of seeds at the soaking stage. The barley varieties used were Kangoo and Xanadu. The raw material was used for the production of light malt. The effect of vacuum impregnation on the rate of water upt...
The Pulsed Electric Field (PEF) technique represents a modern technology for treating and processing food and agricultural raw materials. The application of high-voltage electric pulses has been shown to modify macrostructure, improve extractability,...
The purpose of this work was to study the enhancement effect of chitosan coating on inhibition of deoxynivalenol (DON) accumulation by Litsea cubeba essential oil emulsion during malting. Firstly, the primary emulsion suitable for malting process was...
This study investigates the potential of Pythium oligandrum (strains M1 and 00X48) as a biocontrol agent in suppressing the growth of Fusarium culmorum and the production of mycotoxins during the malting of naturally contaminated barley (Hordeum vulg...
Malting is a critical step in barley (Hordeum vulgare) processing, transforming grain into a key raw material for brewing and food production. However, the process is often compromised by Fusarium spp., pathogens responsible for Fusarium Head Blight,...
The present study examined the influence of malting on the phenolic composition of two cultivars of finger millet using an ultra-performance liquid chromatography mass spectrometer. Total polyphenols and antioxidant activities of the grains were also...
The aim of this study was to evaluate the effect of foliar application of selected micro-nutrients on the chemical composition and malting quality of spring barley (Hordeum vulgare L.). The scientific literature lacks in-depth studies that assess the...
Barley is the most popular raw material for malting, and recently, the demand for malt-based products has increased several folds in India and other South Asian countries. The barley growing season is peculiar in the sub-tropical plains region compar...
Legumes, rich in protein, fiber, and micronutrients, are increasingly popular in pulse-based and gluten-free foods despite global consumption stagnating at 21 g/day due to taste, low protein digestibility, anti-nutrients, and long cooking times. Bean...
The paper covers the problem of determination of defects and contamination in malting barley grains. The analysis of the problem indicated that although several attempts have been made, there are still no effective methods of identification of the qu...
Beer production includes the formation of different by-products such as wastewater, spent grains, spent hops, and yeast. In addition to these well-known by-products, it is necessary to mention germ/rootlets, which also remain after the malting proces...
An improved understanding of the malting process could have a significant impact on the efficient production of quality malt for the brewing industry. Analysis of volatile organic compounds produced during the malting process is one approach towards...
Barley (Hordeum vulgare L.) is a key cereal crop for malting and brewing, where grain plumpness and optimal grain protein concentration (GPC) are essential quality traits. This study investigated the combined effects of nitrogen fertilization strateg...
Rye is used in some applications in the food and beverage industry and for the preparation of functional foods. It is an interesting raw material in malting and brewing due to its characteristic contribution to the beer’s color, turbidity, foam...
Barley (Hordeum vulgare L.) is the second winter crop in Argentina. In the national market, grains are mainly destined to produce malt for beer manufacture. Fusarium species are common, causing Fusarium Head Blight (FHB) in barley, which generates yi...
Almost twenty years ago, the importance of the paracaspase MALT1 in antigen receptor-induced NF-κB activation was first described. Since then, several other immune receptors, G-protein-coupled receptors, and receptor tyrosine kinases were ident...
Malt is a natural additive to bread in amounts below 1%. However, there is a lack of research on supplementing bread with a larger dose of malt. The study aimed to evaluate the partial replacement of wheat flour with oat flour (10%) with/without the...
In malt production, steeping and germination steps offer favorable environmental conditions for fungal proliferation when barley is already contaminated by Fusarium species, T-2 toxin producers. However, the use of G. candidum as a biocontrol agent c...
The kilning of malt occurs at different temperatures, depending on the desired color and aromas. Higher temperatures applied during kilning can be involved in polycyclic aromatic hydrocarbons (PAHs) formation in malt. PAHs are undesirable and designa...
Contamination of malting barley grain and malt with micromycetes sampled at various periods post-harvest (3rd, 6th, and 9th month of storage) and types of storage (storage silo and floor warehouse) was investigated. Each of these barley grain samples...
Delaying flavour staling has been one of the greatest and most significant challenges for brewers. The choice of suitable raw materials, particularly malting barley, is the critical starting point to delay the risk of beer staling. Malting barley and...
of 13