106 Results Found

Two types of cost-efficient antennas based on dielectric gradient index dielectric lens have been designed for 5G applications at 28 GHz. The first is a linearly polarized flat lens antenna (LP-FLA) for terrestrial 5G communications. The second...

This paper presents a practical design consideration for the dielectric lens based on Huygens’ principle (HP) at a short distance (=λ0/2) from a feed antenna to overcome the limitation of the conventional design method. It is suggested t...

We report the design, simulation, and analysis of a THz phased array, using lens-coupled annular-slot antennas (ASAs) for potential beyond 5G or 6G wireless communications. For a prototype demonstration, the ASA employed was designed on a high resist...

Despite to the significant literature available on the design and applications of two-dimensional constrained lens antennas, and in particular on the Rotman–Turner lens, a rigorous study focused on the minimization of optical aberrations does n...

Novel three-dimensional discrete lens antennas characterized by a number of focal points ranging from one to five and defined explicitly via analytical equations are presented in the paper. A procedure to derive rotationally symmetric afocal lenses s...

The design of spatially varying lens antennas based on artificial materials is of high interest for their wide range of applicability. In this paper, we propose a novel design procedure relying on an inverse formulation of the scattering matrix metho...

In this paper, an innovative procedure is proposed for the design of three-dimensional discrete lens antennas characterized by an extended field of view. While in a companion paper the design procedure was based on the definition of multifocal constr...

This work proposes an all-quartz integrated lens antenna for the first time. The antenna feed and lens materials are both made of quartz. The antenna is designed to work at 26 GHz and has the advantages of small size and reduced surface wave loss. Tw...

In the 5G mobile system, new features such as millimetre wave operation, small cell size and multi beam are requested at base stations. At millimetre wave, the base station antennas become very small in size, which is about 30 cm; thus, dielectric le...

This paper proposes a millimeter-wave lens antenna using 3-dimensional (3D) printing technology to reduce weight and provide stable gain performance. The antenna consists of a four-layer cylindrical gradient-index (GRIN) lens fed by a wideband Yagi a...

This paper proposes a graded effective refractive indexes (GRIN) dielectric lens for 5G applications. The inhomogeneous holes in the dielectric plate are perforated to provide GRIN in the proposed lens. The constructed lens employs a collection of sl...

Beam-switching antennas based on quasi-optical beamformers can provide cost-effective solutions for high-frequency communication applications. Here, we propose a wide-angle beam-switching planar lens antenna based on the recently presented virtual im...

Wind profile radar systems require antennas with multiple radiation beams for detecting wind velocity, as well as with a low sidelobe and dual polarization for enhancing the sensitivity for the weak signal reflected from the turbulence. This paper pr...

This paper presents the design, simulation, and fabrication of a horn antenna integrated with a dielectric lens for focusing RF energy at 10 GHz. The antenna system combines established electromagnetic principles with 3D printing techniques to produc...

This study introduces a groundbreaking antenna system, the directive Metasurface Half-Maxwell Fish-Eye (MHMF) lens antenna, tailored specifically for Internet-of-Things (IoT) networks. Designed to operate at 60 GHz, this antenna ingeniously integrate...

This work presents the design of a transparent Fresnel-zone lens antenna fabricated from Polydimethylsiloxane, also known as PDMS or dimethicone, a polymer widely used for manufacturing and prototyping microfluidic chips. The antenna operates in the...

In this paper, a wideband flat lens antenna with low reflection and good performance is presented based on conformal transformation optics (CTO). Physical space optimization is applied to eliminate singular refractive index values. Furthermore, we em...

This paper describes the integration of a plate Luneburg lens with a microstrip patch antenna (MPA) with a complementary split ring resonator (CSRR) at 17 GHz frequency. The main advantage of the method is the compact size of the optimized MPA with C...

The design and implementation of an ultra-wideband trapezoidal log-periodic antenna (LPA) integrated with an elliptical dielectric lens are presented. The proposed LPA is fed by an ultra-wideband microstrip-to-coplanar stripline transition structure....

This paper presents a dual-polarized millimeter-wave filtering antenna based on a broadband partially reflective surface lens for gain improvement. It consists of a magneto-electric dipole (M-E dipole) as the source and a partially reflective surface...

In this paper, a volumetric Rotman lens antenna operating at 28 GHz is proposed. The design formula and procedure were derived for the 3-D Rotman lens antenna. The number of tilted beams is 3 × 3. The six rectangular blocks are assembled using...

This study proposes an on-chip terahertz (THz) detector designed with on-chip inset-feed rectangular patch antenna and catadioptric lens. The detector incorporates a dual antenna and dual NMOSFET structure. Radiation efficiency of the antenna reached...

This paper presents the design, manufacturing, and testing of a Ku-band magnified active Tx/Rx multibeam antenna based on a discrete constrained lens. Multibeam antennas based on constrained lenses generate a significant number of beams on a large op...

This paper introduces an innovative antenna design utilizing a cylindrical dielectric Luneburg lens tailored for 60 GHz Internet of Things (IoT) applications. To optimize V-band communications, the permittivity of the dielectric medium is strategical...

In this study, a metamaterial-based LTCC compressed Luneburg lens was designed, manufactured and measured. The lens was designed at 60 GHz to utilize the unlicensed mm-wave spectrum available for short-range high-capacity wireless communication netwo...

In this work, we present a method for designing a dielectric lens with a reduced height that is easily printed with one-take 3D printing. For the first time, we prove that the configuration of a printout made of resin material can be modified for eff...

A 3-D printed Fresnel-lens antenna formed by dielectric unit cells insensitive to polarization is presented in this article. The proposed unit cell can be implemented in any azimuth orientation, simplifying the design and the implementation of the Fr...

This paper presents a novel mechanically beam-steered antenna system for 10 GHz applications, enabled by multi-material 3D-printing technology. The proposed design eliminates the need for complex electronic circuitry by integrating a mechanically rot...

A post-wall-structured tapered slot antenna (PWTSA) loaded with an embedded metamaterial-based lens (metalens) is proposed and investigated for short-pulse applications. The proposed embedded metalens consists of not only a metallic delay lens, but a...

In order to increase the gain of an end-fire antenna array and improve its broadband characteristics, techniques using a dielectric lens and defected ground structure have been investigated in this paper. The element of the array was constructed usin...

To measure the electromagnetic properties of steel fiber-reinforced concrete (SFRC) in the X-band, 1-port measurements were performed using a lens horn antenna in a free-space measurement system. Free-space 1-port calibration with translations of the...

This work presents a methodology for designing deployable reflector antennas that combine origami structures and the Fresnel zone plate lens to obtain a compact antenna structure. In particular, Miura and Yoshimura’s origami patterns have been...

With the rapid consumer adoption of mobile devices such as tablets and smart phones, tele-traffic has experienced a tremendous growth, making low-power technologies highly desirable for future communication networks. In this paper, we consider an amb...

Multi-beam microwave antennas have attracted enormous attention owing to their wide range of applications in communication systems. Here, we propose a broadband metamaterial-based multi-beam Luneburg lens-antenna with low polarization sensitivity. Th...

With the development of communication technology has come several measurement applications requiring plane-wave conditions for wireless-device characterizations in anechoic chambers. In this paper, a metasurface lens with a 2 × 2 feeding-antenn...

Narrow beam width, higher gain and multibeam characteristics are demanded in 5G technology. Array antennas that are utilized in the existing mobile base stations have many drawbacks when operating at upper 5G frequency bands. For example, due to the...

This paper presents a 2D multibeam antenna (2D-MBA) for two-dimensional scanning of space with fully passive elements using the substrate integrated waveguide (SIW) leaky-wave antenna (LWA) and Rotman lens for telecommunication applications. An LWA s...

In this paper, a dual-polarized antenna based on a substrate-integrated waveguide (SIW) horn antenna and Vivaldi antenna is proposed. The horizontal polarization (HP) is achieved by using the H-plane SIW horn antenna, while the vertical polarization...

A design of a modular antenna/detector array for the electron cyclotron emission (ECE) imaging system at the Korea Superconducting Tokamak Advanced Research (KSTAR) is proposed. The modular antenna/detector array is based on a unit antenna/detector m...

In this article, we demonstrate how twist symmetries can be employed in the design of flat lenses. A lens design is proposed, consisting of 13 perforated metallic sheets separated by an air gap. The perforation in the metal is a two-dimensional array...

Wireless power transfer promises to revolutionize the way in which we use and power mobile devices. However, low transfer efficiencies prevent this technology from seeing wide scale real-world adoption. The aim of this work is to use quasioptics to d...

This paper proposes a novel design approach for a thin lens with the aim of overcoming fineness limits in the commercial millimeter wave printed circuit board (PCB) manufacturing process. The PCB manufacturing process typically does not allow the fab...

The advanced design of a millimeter-wave quasi-optical beamforming device (QOBD) based on the ferroelectric ceramic was elaborated and considered. Among the advantages of the proposed design are simplicity and cost-effectiveness in contrast to conven...

In recent years, the building insulation layer peeling caused by quality problems has brought about safety hazards to human life. Existing means of non-destructive testing of building insulation layers, including laser scanning, infrared thermal imag...

This paper reports on the design and experimental validation of a fully-metallic double-ridged waveguide 10 × 10 Rotman lens additively manufactured as a single part. The wide band operation of this quasi-optical beamformer enables us to cover...

The multi-dimensional optimization of mechanisms is a typical optimization problem encountered in mechanical design. Herein, the Hybrid strategy improved Beetle Antennae Search (HSBAS) algorithm is proposed to solve the multi-dimensional optimization...

This paper presents a waveguide Lens antenna at the W-band adopting dual-focusing Lens to improve the performance. The Lens antenna consisted of a waveguide slotted structure and lenses processed using NOA73 meet the demands of miniaturization for cu...

As the physical size of a communication system for satellites or unmanned aerial vehicles demands to be reduced, a compact antenna with high directivity is proposed as a core element essential to the wireless device. Instead of using a horn or an arr...

The development of composite materials with tunable dielectric properties that preserve mechanical performance is essential for next-generation radio engineering devices. In this study, composite filaments based on acrylonitrile–butadiene&ndash...

This paper presents a novel hallway gait extraction system that enables an individual’s spatiotemporal gait parameter extraction at each gait cycle using a single FMCW (Frequency Modulated Continuous Wave) radar. The purpose of the proposed sys...