568 Results Found

Positron annihilation lifetime spectroscopy (PALS) has been used for the first time to investigate the microstructure of additively manufactured molybdenum. Despite the wide applicability of positron annihilation spectroscopy techniques to the defect...

The review provides a summary of the current methods of tracing photoexcitation processes and structural dynamics in the solid state, putting major emphasis on the X-ray diffraction techniques (time-resolved Laue diffraction on synchrotron sources an...

This study investigates the optical properties of diffraction gratings using localized surface plasmon resonance (LSPR) with metal nano-hemispheres. We fabricated metal nano-hemisphere gratings (MNHGS) with Ga, Ag, and Au and examined their wavelengt...

Selective laser melting (SLM) is a technology of layer-by-layer additive manufacturing using a laser. This technology allows one to get complex-shaped, three-dimensional (3D) specimens directly from metal powder. In this technology, various metal pow...

Stainless steels have the advantage of forming a protective surface layer to prevent corrosion. This layer results from phase and structural changes on the steel surface. Stainless steel samples (1.4404, 316L), whose alloying elements include Cr, Ni,...

Selective laser melting (SLM) as an additive manufacturing method makes it possible to quickly produce complexly shaped three-dimensional (3D) metal specimens from a powder. This work describes how SLM affects the surface phase composition of a 3D pr...

Hydrazones based on mono- and bicyclic terpenoids (verbenone, menthone and carvone) have been investigated in vitro as potential biomembrane penetration enhancers. In this regard, liposomes composed of lecithin or cardiolipin as phospholipid phase co...

Flocculation can be used in turbulent environments resulting in floc breakage due to shearing. The degree of re-flocculation relates directly to product quality and process efficiency. This study aimed at looking for alternatives to improve the re-fl...

The oxidation behaviour of iron-based 316L stainless steel was investigated in the temperature range of 700 to 1000 °C. The test specimens in the shape of plates were produced by selective laser melting. After fabrication, the samples were sandbl...

The most important task in the design of dosage forms is to modify the pharmaceutical substances structure in order to increase solubilization, targeted delivery, controlled rate of drug administration, and its bioavailability. Screening—labora...

Yttrium scandate crystal fiber has been obtained through laser-heated pedestal growth. The crystal belongs to a bixbyite crystal structure and crystallizes in Ia$\overline{3}$ space group. X-ray diffraction method shows a lattice parameter of a = 10.228(1)...

The realization of compact X-ray sources is one of the most intriguing applications of laser-plasma based electron acceleration. These sources based on the oscillation of short micron-sized bunches of relativistic electrons provide femtosecond X-ray...

European XFEL is a free-electron laser (FEL) user facility providing soft and hard X-ray FEL radiation to initially six scientific instruments. Starting user operation in fall 2017 European XFEL will provide new research opportunities to users from s...

Particle aggregation is essential in many industrial processes, spanning the pharmaceutical and food industries, polymer production, and the environment, among others. However, aggregation can also occur, in some processes, as a non-desired side effe...

Polymeric flocculants are widely used due to their ability to efficiently promote flocculation at low dosages. However, fundamental background knowledge about how they act and interact with the substrates is often scarce, or insufficient to infer the...

The X-ray free-electron laser of the Pohang Accelerator Laboratory (PAL-XFEL) was opened to users in 2017. Since then, significant progress has been made in PAL-XFEL operation and beamline experiments. This includes increasing the FEL pulse energy, i...

Additive manufacturing, particularly selective laser melting, presents exciting possibilities for fabricating components from high-temperature nickel-based superalloys. Controlling microstructural features and minimizing defects in fabricated specime...

Stainless steels are widely used across many industrial sectors, including the fabrication of welded structures. The most common methods for joining these materials are arc welding processes. Increasing demands for higher weld quality and process eff...

Wide-range continuous spatial variation of the film composition in lateral compositionally graded epitaxial films requires the development of high throughput measurement techniques for their local and non-destructive characterization with the highest...

The purpose of this study was to investigate the synthesis of iron oxide nanoparticles under two different conditions, namely high and low gas flow rates, using laser pyrolysis and to examine the influence of laser power. The attained nanoparticles h...

The fabrication of diffraction gratings by ultrashort direct laser writing in poly-hydroxyethyl-methacrylate (PHEMA) polymers used as soft contact lenses is reported. Diffraction gratings were inscribed by focusing laser radiation 100 µm undern...

In recent years, the laser-based ablation of damaged or undesired tooth material has emerged as a highly promising technique for improving dental cavity preparation. While X-ray diffraction and X-ray photoelectron spectroscopy are generally used to c...

The high-precision diffraction grating is an important chromatic dispersion component that has been widely used in many fields, including laser beam combining, chirped pulse compression, spectroscopy, among others. In this paper, we review the develo...

Laser cutting technology is one of the basic approaches used for thermal processing of parts fabricated from almost all engineering materials. Various types of lasers are utilized in the industry with different attendant gases such as nitrogen or arg...

In this paper, we first report the laser grinding method for a single-crystal silicon wafer machined by diamond sawing. 3D laser scanning confocal microscope (LSCM), X-ray diffraction (XRD), scanning electron microscope (SEM), X-ray photoelectron spe...

The study of laser processing of acrylic intra-ocular lenses (IOL) by using femtosecond laser pulses delivered at high-repetition rate is presented in this work. An ultra-compact air-cooled femtosecond diode laser (HighQ2-SHG, Spectra-Physics) delive...

This work aimed to prepare nanostructures of ZnO with various lasers, testing them as photocatalysts, and comparing their morphology and activity in the degradation of organic pollutants in aqueous media. ZnO nanospheres (ns-ZnO) and ZnO nanorods (ms...

Electron spectroscopy with the unprecedented transmission of angle-resolved time-of-flight detection, in combination with pulsed X-ray sources, brings new impetus to functional materials science. We showcase recent developments towards chemical sensi...

Optical-range bulk diffraction nanogratings were fabricated via challenging direct inscription by ultrashort (femtosecond, fs) laser pulses inside heat-shrinkable polymers (thermoplastics) and VHB 4905 elastomer. The inscribed bulk material modificat...

In the past couple of decades, the laser-heated diamond anvil cell (combined with in situ techniques) has become an extensively used tool for studying pressure-temperature-induced evolution of various physical (and chemical) properties of materials....

Intermetallide phase formation was studied in a powdered Fe–Al system under layer by layer laser cladding with the aim of fabricating the gradient of properties by means of changing the Fe–Al concentration ratio in the powder mixture from layer to la...

A holmium-doped yttrium aluminum garnet (Ho:YAG) thin disk was experimentally investigated under Q-switching and cavity-dumping operation schemes, pumped by a 1.9 µm laser diode (LD). The laser generated pulses at 2090 nm with energies more tha...

Within the field of tissue engineering, thin films have been studied to improve implant fixation of metallic or ceramic materials in bone, connective tissue, oral mucosa or skin. In this context, to enhance their suitability as implantable devices, t...

A diffractive grating is a well-known optical component and is extensively used in many applications. This research work explores application of the diffractive grating in a photoconductive antenna (PCA) of a terahertz time domain spectroscopy (THz-T...

Laser slicing has emerged as a promising low-kerf and low-damage technique for SiC wafer fabrication; however, its effects on the crystal integrity, near-surface modification, and charge-transport properties require further clarification. Here, a hea...

Using in situ high-pressure Raman spectroscopy and X-ray diffraction, the polymerization and structure evaluation of C₆₀ were studied up to 16 GPa at room temperature. The use of an 830 nm laser successfully eliminated the photo-polymerization of C₆₀...

Narrow linewidth external cavity semiconductor lasers (NLECSLs) have many important applications, such as spectroscopy, metrology, biomedicine, holography, space laser communication, laser lidar and coherent detection, etc. Due to their high coherenc...

Laser ablation of a bulk graphite target in water using femtosecond laser pulses (pulse width ≤ 190 fs) was performed to investigate the synthesis of polyynes and carbon-based nanomaterials and compare them with the well-studied cases of longer pu...

This paper presents the results of a study on the high-temperature oxidation characteristics after mechanical and laser removal of TA15 titanium alloy oxide film. The morphology, components, and roughness of the surface were characterized by scanning...

Prior studies of the thin film deposition of the metal-organic compound of Fe(pz)Pt[CN]₄ (pz = pyrazine) using the matrix-assisted pulsed laser evaporation (MAPLE) method, provided evidence for laser-induced decomposition of the molecular structure r...

In this work, semiconductor tin oxide (II) (SnO) nanoparticles and plates were synthesized at room conditions via a hydrolysis procedure. X-ray diffraction (XRD) and transmission electron microscopy (TEM) confirmed the high crystallinity of the as-sy...

Colloidal gold nanoparticles are a widespread nanomaterial with many potential applications, but their aggregation in suspension is a critical issue which is usually prevented by organic surfactants. This solution has some drawbacks, such as material...

The effect of rare earth oxides on the microstructure and corrosion behavior of laser-cladding coating on 316L stainless steel was investigated using hardness measurements, a polarization curve, electrochemical impedance spectroscopy (EIS), a salt sp...

In this study, Cr₃C₂-Al₂O₃-NiCr coatings were prepared on INCONEL 600 alloy surfaces using the supersonic flame spraying technique, followed by a laser remelting treatment. In this way, this study further explored what impacts laser remelting has on...

This study aims to enhance the corrosion performance of cold-sprayed titanium/baghdadite (Ti/BAG) bio-composite coatings. Laser post processing was performed to reduce porosity and improve mechanical properties. The process parameters for laser treat...

The paper deals with the experimental study of laser beam micromachining of the powder metallurgy processed Ti compacts applying the industrial grade fibre nanosecond laser operating at the wavelength of 1064 nm. The influence of the laser energy den...

In this work, a Ni-alloy Deloro-22 was laser-deposited on a Ti–6Al–4V bar substrate with multiple sets of laser processing parameters. The purpose was to apply laser surface modification to synthesize different combinations of ductile TiN...

Thermochromic tungsten-doped VO₂ thin films were successfully fabricated using a W-V alloy target. X-ray diffraction analyses showed that the W-doped VO₂ film had a preferred orientation of (011), and that the doping did not degrade the film crystall...

The replacement of electro-thermal material in heaters with lighter and easy-to-process materials has been extensively studied. In this study, we demonstrate that laser-induced graphene (LIG) patterns could be a good candidate for the electro-thermal...

Antimonene has attracted much attention due to its excellent characteristics of high carrier mobility, thermoelectric properties and high stability. It has great application prospects in Q-switched lasers, laser protection and spintronics. At present...