573 Results Found

Background/Objectives: Endodontically treated molars are structurally weakened due to internal tissue loss, increasing their risk of fracture. Endocrowns, developed as a conservative alternative to post–core systems, have gained popularity with...

In order to better understand the effect of compositional parameters on the properties of magnesium phosphate cement (MPC) mortar, the relationship between the thickness of paste film and the workability and strength of MPC mortar is revealed. A thre...

Although several natural plants and mixtures have been known and used over the centuries for their antibacterial activity, few have been thoroughly explored in the field of dentistry. Thus, the aim of this study was to enhance the antimicrobial activ...

Optimal bond strength between the prefabricated post/dowel to the surrounding dentin is essential. The present study aimed to analyze and compare the effect of three different cement film thicknesses on the pull-out bond strength of three different p...

Previous studies demonstrated that water film thickness (WFT) is a key factor that affects the fluidity of mortar. Changes in the sand-cement (S/C) ratio and polycarboxylate superplasticizer (PCE) dosage will affect the WFT. In this study, several mo...

Cement emulsified asphalt mixture (CEAM) is widely used in asphalt pavement for its environmental virtues. However, a CEAM layer can influence fatigue performance of asphalt pavement because of higher air voids of CEAM in contrast to hot mix asphalt...

Using a three-dimensional finite element analysis, this study aimed to evaluate the effect of different cements’ thicknesses and Poisson’s ratios on the stress distribution in enamel, dentin, restoration, and resin cement in a computer-ai...

The breakage of massive thick weakly cemented rock layer is likely to cause strong mine earthquakes, which threatens the safe and sustainable production of the mine. In order to reveal the breakage law of high-level giant-thickness weakly cemented ov...

(1) Background: The shade of resin-based materials and ceramic thickness influence the optical color of laminate restorations. The purpose of this study is to evaluate—in vitro—the effect of resin-based cement shade and ceramic thickness...

The purpose of this study was to evaluate the color changes of feldspathic ceramics CEREC Blocs (Dentsply Sirona, Milford, DE, USA) when cemented with different luting agents, while varying the ceramic thickness. Seventy ceramic discs of feldspathic...

We investigated the effects of lithium disilicate ceramic thickness and translucency on the degree of polymerization of light-cured resin cement using the measure of hardness. Lithium disilicate specimens of three translucencies (low, medium and high...

The purpose of this finite element analysis (FEA) was to evaluate the stress distribution within the prosthetic components and bone in relation to varying cement thicknesses (from 20 to 60 μm) utilized to attach a zirconia crown on a conometric ca...

Cement film thickness may have an impact on the shear bond strength (SBS) of lithium disilicate dental ceramics luted to human enamel with resin cement. The objective of this study was to evaluate SBS of lithium disilicate ceramics adhered to enamel...

The objective of this study was to analyze the effect of cement thickness on the strain and stresses resulting from the polymerization of resin cement using photoelasticity and Finite Element Analysis (FEA). For this study, twenty upper first premola...

The successful restoration of teeth requires a good connection between the inlay and natural tissue. A strong bond may improve retention and reinforce tooth structure. The purpose of this study was to evaluate the influence of cement layer thickness...

The objective of this study is to evaluate the impact of the thickness and translucency of various computer-aided design/computer-aided manufacturing (CAD/CAM) materials on the polymerization of dual-cure resin cement in endocrown restorations. Three...

Bioactive resin cements are gaining popularity for their clinical benefits, but concerns remain regarding their color stability. This study evaluated the color change (ΔE00) and whiteness change (ΔWID) in bioactive resin cements and how t...

This study tested whether three different cement layer thicknesses (60, 120 and 180 μm) would provide the same bonding capacity between adhesively luted lithium disilicate and human dentin. Ceramic blocks were cut to 20 blocks with a low-speed diamon...

Coal mining disturbance induces progressive damage and fracturing in overlying rock (OLR), forming a complex fracture network. This process triggers groundwater depletion, ecological degradation, and severely compromises mine safety. Based on field d...

The purpose of the present study was to perform a preliminary analysis of the fitting of different fiber-reinforced composite (GFRC) posts to tooth root canals and determine the resin cement layer thickness. The following GFRC posts were assessed: bu...

The adhesive cementation of ceramic inlays may increase pulpal temperature (PT) and induce pulpal damage due to heat generated by the curing unit and the exothermic reaction of the luting agent (LA). The aim was to measure the PT rise during ceramic...

The roles of dielectric materials in adjusting the electromagnetic wave (EMW) absorption performance of an EMW absorber are as crucial as the EMW absorbents. The commonly used cement-based materials, such as mortar, are typical composites of multiple...

The mechanical properties and the thickness of the resin cement agents used for bonding inlay bridges can modify the clinical performance of the restoration such as debonding or prosthetic materials fracture. Thus, the aim of this study was to evalua...

To guarantee that the cement sheath has a sealing effect, it is best to replace the drilling fluid entirely and fill the annulus with cement slurry throughout the cementing process. A significant driving power and high stability at the interface betw...

Wear debris in total hip arthroplasty is one of the main causes of loosening and failure, and the optimal acetabular fixation for primary total hip arthroplasty is still controversial because there is no significant difference between cemented and un...

The wear rate on Total Hip Arthroplasty (THA) entails a heavy burden for patients. This becomes more relevant with increased wear risk and its consequences such as osteolysis. In addition, osteolysis has been described in cemented and uncemented acet...

In this paper, the effect of a newly developed superfine basalt powder (SB) on the fresh and mechanical properties of cement paste was studied. The concept of water film thickness (WFT) was cited to explain the influence of SB on fresh and mechanical...

Nanofillers in resin materials can improve their mechanical and physicochemical properties. The present work investigated the effects of zirconia nanoparticles (NPs) as fillers in commercial dental luting cements. Two dual-cured self-adhesive composi...

The aim of this study was to evaluate the effect of CAD/CAM composite thickness on micro-tensile bond strength (µTBS), microhardness (HV), and film thickness (FT) of different luting composites. Composite blocks (6.8 mm × 6.8 mm) were div...

For an ultra-shallow buried double-arch tunnel with a large cross-section, the arching effect is difficult to form in surrounding rock, and grouting method is often adopted to reinforce the surrounding rock. Hence, examining the grouting reinforcemen...

The ternary blended cement with finer slag and silica fume (SF) could improve the packing density (PD) through the filling effect. The excess water (water more than needed for filling into voids between the cement particles) can be released to improv...

This study examines the utilization of granite stone-crushing waste in the production of porous concrete, with a particular emphasis on the influence of aggregate composition and cement paste layer thickness on the material’s strength and densi...

This study aimed to determine the reinforcing effect of two weight ratios of Gum Arabic (GA) natural biopolymer, i.e., 0.5% and 1.0% in the powdered composition of glass ionomer luting cement. GA powder was oxidized and GA-reinforced GIC in 0.5 and 1...

The temperature estimation within asphalt concrete (AC) overlaid on cement-stabilized bases (CSB) is necessary for pavement analysis and design. However, the impact of different CSB gradations and rubberized CSB on AC temperature has not been thoroug...

In the western mining region, weakly cemented rock layers above the coal seams often lead to frequent catastrophic accidents during mining due to their instability. To address this, this paper analyzes the movement characteristics of surrounding rock...

In the present study, the fatigue crack growth (FCG) behavior of short surface cracks in a fine-grained cemented carbide with a length of less than 1 mm was investigated. The rotating bending and the four-point bending fatigue tests were carried out...

In this study, physical factors influencing the efficiency of adhesive bonding in External Thermal Insulation Composite Systems (ETICS) using the ribbon-and-dab bonding method were analyzed. Tests were carried out to show the distribution of pressure...

Expressways are often built on soft ground, the foundation of which is not processed adequately during the construction period. Consequently, the traffic safety and embankment stability will be seriously affected due to uneven settlement. The technol...

To investigate the mechanism of polypropylene fiber (PPF) on the rheological and thixotropic properties of cemented paste backfill containing mineral admixtures, the concept of water film thickness (WFT) was introduced. The packing density of the tai...

For the underhand cut-and-fill mining method, to ensure safe and economic mining, a key issue is to correctly determine the required strength of the artificial roof made of cemented paste backfill (CPB). However, the determination of the required str...

Background: In this study, it was aimed to use a finite element stress analysis method to determine the amount of stress on enamel, dentin, restoration, resin cement and glass ionomer cement in amalgam class II disto-occlusal (DO) cavities by using t...

Although self-adhesive resin cements are convenient and less technique-sensitive materials for dental clinicians, they exhibit a lower degree of conversion due to acidic components in their composition. Supplementation of the initiator, accelerator,...

WC-Co cemented carbides, commonly known as hardmetals, are composite materials constituted by hard ceramic particles embedded in a ductile metal matrix. Due to their unique microstructural assemblage, these materials exhibit excellent combinations of...

The influence of different types of cemented carbide blades and thickness of TiAlN/a-C:N and TiN/AlTiN protective coatings used in the wood industry on cutting performance has been studied. Three types of WC-Co cemented carbide blades with different...

While surface movement regularities have been sufficiently understood in the mining practices of eastern China, the case seems to be very different in western China where the super-thick and weak cementation (STWC) overburden exists. To better unders...

Borehole convergence during or after drilling is one of the primary indicators of borehole instability. Early recognition of borehole instability is critical in achieving successful and timely completion of drilling operations and for borehole exploi...

Chemical shrinkage (CS) is the reason behind early age cracking, a common problem for concrete with low water to cement ratios (w/c < 0.35) known as Ultra-High- and High-Performance Concrete (U-HPC). However, to avoid the crack development initiat...

Focusing on the mining-induced fracture development characteristics of Weakly Cemented Overburden (WCO) in Ultra-Thick Coal Seam (UTCS) extraction, this study, based on the 1101 first mining face in Xinjiang’s Zhundong Coalfield, systematically...

Background: To determine what thickness of 5 mol% yttria zirconia (5Y-Z) translucent crowns cemented with different cements and surface treatments would have equivalent fracture resistance as 3 mol% yttria (3Y-Z) crowns. Methods: The study included 0...

Purpose: This study aimed to assess the layer thickness and microstructure of traditional resin-matrix cements and flowable resin-matrix composites at dentin and enamel to composite onlay interfaces after cementation on low loading magnitude. Materia...