Both magnetic-field-induced reverse martensitic transformation (MFIRMT) and a high working temperature are crucial for the application of Ni-Mn-Sn magnetic shape memory alloys. Here, by first-principles calculations, we demonstrate that the substitut...
A textured structure of Ni–Mn–Sn Heusler alloy with [001] preferred orientation has been grown by the directional solidification method. The crystal exhibits a single austenite phase L21 cubic structure (a = 5.997 Å) at room tempera...
Brittleness and low working temperature are two key factors that restrict the application of Ni-Mn-Sn alloys. Element doping is an effective means to improve performance of materials. In present paper, martensitic transformation (MT) and mechanical p...
Terahertz absorbers have been extensively investigated by researchers due to their applications in thermophotovoltaic energy conversion and sensors, but a key factor limiting their development is the lack of vital and versatile materials. Ferromagnet...
Ni-Mn-Sn-based ferromagnetic shape memory alloys (FSMAs) are multifunctional materials that are promising for solid-state refrigeration applications based on the magnetocaloric effect (MCE) and elastocaloric effect (eCE). However, a combination of ex...
Ni-Mn-Sn ferromagnetic shape memory alloys, which can be stimulated by an external magnetic field, exhibit a fast response and have aroused wide attention. However, the fixed and restricted working temperature range has become a challenge in practica...
Thermal and structural austenite to martensite reversible transition was studied in melt spun ribbons of Ni50Mn40Sn5Co5, Ni50Mn37.5Sn7.5Co5 and Ni50Mn35Sn10Co5 (at. %) alloys. Analysis of X-ray diffraction patterns confirms that all alloys have marte...
We have performed a quantum-mechanical study of a series of stoichiometric Ni2MnSn structures focusing on pressure-induced changes in their magnetic properties. Motivated by the facts that (i) our calculations give the total magnetic moment of the de...
Intermetallic NiMn-based Heusler alloys (HAs) have garnered considerable attention due to their multifunctionality and applications in various fields, including sensors, actuation, refrigeration, and waste heat harvesters. Among the NiMn-based alloys...
The influence of both the Co addition and the internal stress on the atomic level magnetism is comparatively studied in Ni50Mn37Sn13 and Ni45Mn38Sn13Co4 alloys by magnetic measurements and 119Sn Mössbauer spectroscopy. The results show that the satur...
In order to investigate the Fe substituted effects on the magnetic properties of the Ni-Mn-Sn metamagnetic shape memory alloys, magnetization and the Mössbauer spectroscopy measurements were carried out with using 57Fe-doped specimens of Ni2Mn1.48−x5...
A Ni2MnSn Heusler alloy composition of elemental powders was high-energy milled for a short time for powder activation. The milling times were chosen to be 1 and 4 h to study how mechanical mixing triggers the phase formation in the Ni-Mn-Sn system....
Two Ni–Mn–Sn alloys substituted with 0.5 and 1 at.% Cr have been studied. The first alloy shows an average composition of Ni49.6Mn37.3Cr0.7Sn12.4 (e/a = 8.107), whereas the second has a multiphase microstructure with the matrix phase of an average Ni...
Microwave absorption performance of metal alloys are highly dependent on their phase structures. However, the phase control of Ni–Mn-based alloys to achieve effective microwave absorption properties has been rarely reported. In this work, Ni43C...
Nickel-rich layered LiNi1−x−yCoxMnyO2 (LiMO2) is widely investigated as a promising cathode material for advanced lithium-ion batteries used in electric vehicles, and a much higher energy density in higher cut-off voltage is emergent for...
The impact of Co-addition (x = 0, 2, 4, and 6 at. %) in the as-cast and annealed Ni50Mn37.5Sn12.5 Heusler alloy at 900 °C for 24 h on the microstructure, magnetic properties, and the martensitic transition was studied using X-ray diffraction (XRD...
NiMnSn ferromagnetic shape memory alloys exhibit martensitic transformation at low temperatures, restricting their applications. Therefore, this is a key factor in improving the martensitic transformation temperature, which is effectively carried out...
Heusler Ni-Mn-Sn-based alloys are good candidates for magnetic refrigeration. This application is based on cycling processes. In this work, thermal cycles (100) have been performed in three ribbons produced by melt-spinning to check the thermal stabi...
Martensitic transition and magnetic response of Ni50−x Pdx,y Mn36 Sn14−y (x = 0, 1, 2 and y = 0, 1) Heusler alloys were analysed. The crystalline structure of each composition was solved by X-ray diffraction pattern fitting. For x = 1 and...
In this work, scanning electron microscopy, X-ray diffraction, and differential scanning calorimetry were used to investigate the solidification structure, thermal behavior, and kinetics of the martensitic transformations of the (Mn,Ni)Sn as-spun and...
The magnetostructural transitions, magnetocaloric effects, and magnetoresistance properties of Ni45Mn43CrSn11 Heusler alloys were investigated using X-ray diffraction (XRD), field-dependent magnetization, and electrical resistivity measurements. A la...
Cu–9Ni–6Sn alloys have received widespread attention due to their good mechanical properties and resistance to stress relaxation in the electronic and electrical industries. The hot compression deformation behaviors of the Cu–9Ni&nd...
Due to its unique single-phase multivariate alloy characteristics and good low-temperature mechanical properties, CoCrFeNiMn high entropy alloy (HEA) has attracted the interest of many researchers in recent years. In this paper, to improve the wear r...
Direct measurements of the magnetocaloric effect were performed in a Heusler Ni44.4Mn36.2Sn14.9Cu4.5 alloy at cryogenic temperatures in magnetic fields up to 10 T. The maximum value of the inverse magnetocaloric effect in a 10 T field was ∆Tad...
Metamagnetic off-stoichiometric Heusler alloys are actively being investigated because of their great potential as magnetocaloric materials. These properties are intimately related to the nanoscale homogeneity of their magnetic properties, mainly due...
Isothermal annealing of a eutectic dual phase Ni–Mn–Sn–Fe alloy was carried out to encourage grain growth and investigate the effects of grain size of the γ phase on the martensitic transformation behaviour and mechanical properties of the alloy. It...
The effect of different atomic substitutions at Mn sites on the magnetic and magnetocaloric properties in Ni50Mn35Co2Sn13 alloy has been studied in detail. The substitution of Ni or Co for Mn atoms might lower the Mn content at Sn sites, which would...
Semiconductor-based composites are potential anodes for Li-ion batteries, owing to their high theoretical capacity and low cost. However, low stability induced by large volumetric change in cycling restricts the applications of such composites. Here,...
The full Heusler alloys Ni2MnZ (Z = In, Sn, Sb) exhibit ferromagnetic properties with a Curie temperature (TC) above room temperature. The magnetic properties of Ni2MnZ (Z = In, Sn, Sb) were studied through a combination of experiments and band calcu...
Experimental studies into the forced magnetostriction, magnetization, and temperature dependence of permeability in Ni2MnIn and Ni2MnSn ferromagnetic Heusler alloys were performed according to the spin fluctuation theory of itinerant ferromagnetism p...
Sn-doped MnNiFeO4 ceramic with negative temperature coefficient (NTC) was prepared through the low-temperature solid-phase reaction route (LTSPR), aiming at improving the sintering behavior and modulating the electrical properties. The experimental r...
The effects of substitution of Cu for Sn on the electrochemical discharge capacity performance of La0.7Mg0.3Al0.3Mn0.4Sn0.5−xCuxNi3.8 (x = 0.0, 0.1, 0.2, 0.3, and 0.5) negative electrode alloys were investigated. Results indicate that increasing Cu c...
The effect of Al substitution on microstructure, martensitic transformation and magnetocaloric properties in Ni48Mn39.5Sn12.5−xAlx (x = 0, 1, 2, 3) alloys is reported. At room temperature, depending on Al concentration, the alloys have typical Heusle...
The structure and thermal behavior are key factors that influence the functional response of Ni–Mn–Sn alloys. The present study reports the production as well as the structure and thermal analysis of melt-spun (solidification rate: 40 ms&...
The martensitic transformation and the solidification structures of Mn49.3Ni43.7Sn7.0 alloy ribbons prepared by melt-spinning were investigated by means of scanning electron microscopy, X-ray diffraction and differential scanning calorimetry. In thos...
Direct determinations of the isothermal entropy increment, \(-\Delta S_T\), in the Heusler alloy Ni\(_{50}\)CoMn\(_{36}\)Sn\(_{13}\) on demagnetization gave positive values, corresponding to a normal magnetocaloric effect. These values contradict the...
In this study, a homemade uniaxial strain pressure cell was designed to be directly used in the standard magnetometers whereby the magnetic properties of samples subjected to a uniaxial strain and magnetic field were characterized. Its feasibility ha...
Heusler-type metamagnetic shape memory alloys (MMSMAs) exhibit a large functional response associated with a first-order martensitic transformation (MT). The strong magneto-structural coupling combined with the presence of mixed magnetic interactions...
We present a brief review of experimental and theoretical papers on studies of electron transport and magnetic properties in manganese-based compounds Mn2YZ and Mn3Z (Y = V, Cr, Fe, Co, Ni, etc.; Z = Al, Ge, Sn, Si, Pt, etc.). It has been shown that...
A Ni2MnSn Heusler alloy was obtained as a single B2 phase after 12 h of mechanical milling. The influence of prolonged milling on the phase stability was analysed for milling times up to 50 h, related to mean crystallite size, lattice strain, and ele...
Great progress has been made in the preparation and application of mesoporous metal oxide films and materials during the last three decades. Numerous preparation methods and applications of these novel and interesting materials have been reported, an...
Within the scope of this research, a new short-time procedure designated as StressLifeHCF was developed. Through a combination of classic fatigue testing and non-destructive monitoring of the material response due to cyclic loading, a process-oriente...
In the original publication [...]
We report on the effects of annealing on the martensitic phase transformation in the Ni-based Heusler system: Mn50Ni40Sn10 and Mn50Ni41Sn9 powder and Co50Ni21Ga32 nanoparticles. For the powdered Mn50Ni40Sn10 and Mn50Ni41Sn9 alloys, structural and mag...
This study investigates the interfacial reactions of FeCoNiCr and FeCoNiMn medium-entropy alloys (MEAs) with Sn and Sn-3Ag-0.5Cu (SAC305) solders at 250 °C. The evolution of interfacial microstructures is analyzed over various aging periods. For comp...
Exposure to environmental chemicals during developmental stages can result in several adverse outcomes. In this study, the exposure of Portuguese children to Cu, Co, I, Mo, Mn, Ni, As, Sb, Cd, Pb, Sn and Tl was evaluated through the analysis of first...
This study was conducted to analyze the effect of molybdenum (Mo) on the level of macronutrients (Mg, K, Ca), micronutrients (Na, Zn, B, Mo, Mn, Fe, Co, Ni, Cu) and toxic elements (Cd, Sn, As, Cr, Hg, Pb) in leaves and fruit tissues (peel, pulp &...
Minor and trace elements in soil play a crucial role in regulating ecological processes that sustain the functionality of forest ecosystems. In this study, we have selected three conifer forests (Pinus sylvestris, Picea asperata, Larix principis-rupp...
In this work, three novel complex concentrated aluminum alloys were developed. To investigate the unexplored region of the multicomponent phase diagrams, thermo-physical parameters and the CALPHAD method were used to understand the phase formation of...
In this study, a family of porphyrins based on 5,10,15,20-Tetrakis(4-ethylphenyl)porphyrin (1, Ph) and six metallo-derivatives (Zn2+(2, Ph-Zn), Sn4+(3, Ph-Sn), Mn2+ (4, Ph-Mn), Ni2+ (5, Ph-Ni), Al3+ (6, Ph-Al), and V3+ (7, Ph-V)) were tested as photo...
of 4