The carbide precipitation kinetics in a Fe-22Mn-0.45C TWIP steel subjected to three different cold-deformation levels, annealed at various temperatures, were studied. The studied carbides included chemical compositions, morphology, precipitation site...
Fe–Mn–Al–C low-density steels are regarded as promising materials applied in the automotive industry to achieve the minimization of vehicular emissions and fuel consumption. This study investigates the high-temperature strength and...
Secondary phase precipitation in Fe-22Mn-9Al-0.6C low-density steel was investigated during a continuous cooling process with different cooling rates through a DIL805A thermal expansion dilatometer, and the changes in microstructures and hardness by...
This study meticulously explores two distinct synthesis methods, the solid-state reaction method and the co-precipitation method, for fabricating the spinel-structured solar selective material CuFeMnO4. By comparing the materials synthesized through...
This research focuses on Fe-18Mn-10Al-1C-5Ni lightweight steel and deeply explores the influences of three different cooling methods, namely, water quenching (WQ), air cooling (AQ), and furnace cooling (FQ), on the precipitation behavior of the B2 ph...
Preparation of Mn/TiO2, Mn-Fe/TiO2, and Mn-Fe-Ce/TiO2 by the deposition-precipitation (DP) method can afford very active catalysts for low-temperature NH3-SCR (selective catalytic reduction of NO with NH3). The effect of precursor choice (nitrate vs....
Mixing zones in carbonate coastal aquifers are dynamic interfaces where freshwater and seawater converge, triggering complex biogeochemical processes. This study investigates diagenetic barite (BaSO4) precipitation within such a mixing zone in the do...
Manganese ferrite nanoparticles (MnFe2O4) were synthesized via surfactant-assisted co-precipitation, where sodium dodecyl sulfate (SDS) was used as the template to control particle size at various SDS concentrations. The substitutions of iron (II) (F...
Fe-Mn-Al-C steels exhibit an outstanding combination of strength and ductility, and the addition of aluminum drastically reduces the density of steels. The low density also offers the advantage of lightweight structures compared with other alloys in...
In Fe-Mn-Al-Ni shape memory alloys, the stabilization of superelasticity would be affected by the undesired precipitation of B2 nano-particles during natural aging. In order to solve this problem, the effect of Mo alloying on the precipitation behavi...
In this study, microstructural evolution during solidification of a hypereutectic Al–Mn–Fe–Si alloy was investigated using semi-quantitative two-/three-dimensional phase-field modeling. The formation of facetted Al6Mn precipitates a...
This study uses pure materials or waste batteries to produce a nanoscale Mn–Zn ferrite. Acid is used to dissolve the battery into solution and then co-precipitation is used to produce nanoscale ferrite. When the calcination temperature in an ai...
The effect of sigma-phase precipitation on plastic anisotropy of the equiatomic CoCrFeMnNi high-entropy alloy was investigated. Annealing at 700 °C after cold-rolling leads to the formation of the Cr-rich σ phase with a fraction of 2.7%. It...
Metal alloys with enhanced mechanical properties are in considerable demand in various industries. Thus, this study focused on the development of nanosized precipitates in Fe71.25(CoCrMnNi)23.75Cu3Al2 maraging medium-entropy alloy (MEA). The Fe-based...
The effect of aging on the precipitates, mechanical and magnetic properties of Fe-21Cr-15Ni-6Mn-Nb low magnetic stainless steel were investigated. The steel was aged at 550–750 °C for 2 h after solution heat treatment at 1100 °C for 1 h. During the a...
This study systematically investigates the evolution of vacancy-type defects and heterogeneous Cu nanoprecipitates in an Fe60Cr12Mn8Cu15Mo3V2 (at%) multi-principal element alloy during thermal processing, utilizing Positron annihilation lifetime spec...
The initial as-cast microstructure of high-chromium white cast iron (2.08% C, 12.1% Cr), including austenitic dendrites in a matrix of a eutectic mixture of austenite and M7C3 carbides. Heat treatment of as-cast iron leads to a transformation of the...
The effect of Nb addition on the composition, morphology, quantity, and size of inclusions in Fe-Mn-C-Al steel was studied by SEM, EDS, and thermodynamic analysis. The research shows that the number of inclusions in Fe-Mn-C-Al high manganese steel de...
The microstructures, mechanical properties, and anticorrosion properties of Fe–25Mn–Cr(12, 18 wt.%)–CN TWIP steels compared with nominal Fe–22Mn–0.6C TWIP steel (TWIP-ref) in the solid-solution state were investigated in...
Iron-manganese mixed metal oxide catalysts with a range of Fe:Mn ratios were synthesised by co-precipitation using sodium carbonate and evaluated for total propane oxidation. The Fe0.50Mn0.50Ox catalyst was the most active, and this was due to increa...
The difficulty of separating iron and manganese is a bottleneck issue in the traditional utilization process of iron manganese ore (Fe-Mn ore). In this work, ammonium polyvanadate (APV), an intermediate product in the vanadium industry, was introduce...
In the present work, microalloying is put forward to improve the microstructure and tensile properties of A356.2-0.15Fe (wt.%) alloy by the co-addition of trace Mn and Mg. A suitable Mn/Fe mass ratio of 0.5 is obtained for alloys with 0.15Fe. The yie...
This paper mainly investigated the effect of the Mn/Ag ratio on the microstructure and room temperature and high-temperature (350 °C) tensile mechanical properties of the as-cast and heat-treated Al-6Cu-xMn-yAg (x + y = 0.8, wt.%) alloys. The as-...
Mesoporous Mn-doped Fe nanoparticle-modified reduced graphene oxide (Mn-doped Fe/rGO) was prepared through a one-step co-precipitation method, which was then used to eliminate ethyl violet (EV) in wastewater. The prepared Mn-doped Fe/rGO was characte...
A parent Mg-Al-LDH was upgraded in its adsorption properties due to the incorporation of tri-metal species oxy(hydroxide) nanoparticles obtaining Mn2+/Zn2+/Fe3+/Mg-Al-LDH composite for the phosphate recovery from simulated urban treated wastewater. T...
It is necessary to strictly control the iron (Fe) impurity in Mg-Al alloys to guarantee good corrosion resistance and mechanical properties. In this work, the effects of alloying elements and temperatures on the solubilities of Fe in the Mg-Al-based...
Here, 0.3 wt.%Zr was introduced in an Al-4 wt.%Cu-0.5 wt.%Mn-0.1 wt.%Fe alloy to investigate its influence on the microstructure and mechanical properties of the alloy. The microstructures of both as-cast and T6-treated Al–Cu–Mn–Fe...
In this study, the synergistic behavior of Ni and Al in two low-density steels (Fe-26Mn-10.2Al-0.98C-0.15V (wt. %) and Fe-29Mn-5Al-1C-12Ni (wt. %)) and their influence on microstructures and mechanical properties were investigated. The chemical compo...
Manganese and Fe have similar geochemical properties in the supergene environment. Separation of Mn and Fe is an important process for the formation of high-grade sedimentary manganese deposits. Large-scale manganese carbonate deposits (total reserve...
Convection forces can cause significant segregation within the liquid during directional solidification, influencing the structure of the mushy zone and the type and distribution of phases present in the solidified alloy. The solidification behavior...
Miocene tuffs preserved in argillaceous sediment interbedded with lacustrine successions are commonly encountered throughout the Dinarides Lake System (DLS) in south-eastern Europe. In this contribution the volcanic glass degradation and co-genetic M...
Microbial populations involved in forming the distinctive precipitates of S, Fe, Mn, and Ca in the San Diego River watershed reflect an interplay between the mineralogy of the rocks in the watershed, sparse rainfall, ground- and surface-water anoxia,...
This study presents a comprehensive analysis of the microstructural characteristics and chemical composition of base and weld materials from reactor pressure vessels in the first (units 1 and 2) and second (unit 8) generations of Russian VVER 440 rea...
The Jbel Rhals deposit, located in the Oriental High Atlas of Morocco, hosts a polymetallic Fe-Mn-Cu ore. Large metric veins of goethite and pyrolusite cut through Paleozoic schists that are overlaid by Permian-Triassic basalts and Triassic conglomer...
In this study, a novel lightweight Fe-Mn-Al-C steel composition and thermomechanical processing route was developed to produce a fully austenitic microstructure with a uniform intragranular dispersion of B2-NiAl precipitation in order to overcome the...
The primary mineralization in the famous Lavrion mine in the Lavreotiki area, Attica (Greece), associated with a granodiorite intrusion of Upper Miocene age and composed of massive sulphide Pb-Zn-Ag ores [sphalerite, pyrite and galena (B.P.G)], has b...
The casting structure of the AA6063 alloy contains intermetallic particles of β-Al5FeSi, which can result in the fragility of the cast pieces. However, with heat treatment, the β phase transforms from a needle or plate form into an intermet...
NO oxidation was conducted over MnOx-CeO2 catalysts, which were synthesized by the co-precipitation method. The calcination temperature and third metal doping were the main considerations. MnCe catalysts calcined at 350 °C and 450 °C attained...
We have studied morphology, mineralogy and geochemical characteristics of Fe-oxyhydroxide deposits from metal-enriched sediments of the active (Wocan-1) and inactive (Wocan-2) hydrothermal sites (Carlsberg Ridge, Northwest Indian Ocean). Fe-oxyhydrox...
In the present study, the diffusion couple of solid CoCrFeMnNi HEA and liquid pure Al was prepared. The microstructure evolution and relevant interdiffusion behavior of CoCrFeMnNi HEA/Al solid–liquid diffusion couple processed by different para...
Groundwater is an essential source of drinking and irrigation water. However, elevated Fe and Mn concentrations in groundwater have been found in recent decades, which can adversely affect human health and decrease crop quality and yields. The roles...
The sulphate radical based advanced oxidation processes (AOPs) are highly in demand these days, owing to their numerous advantages. Herein, the Fe-Mn bimetallic oxide particle was used to activate peroxymonosulphate (PMS) for Rhodamine B (RhB) degrad...
The chemical co-precipitation method was used to prepare magnetically separable Fe–Mn oxide composites, and the degradation of p-chloroaniline (PCA) using MnFe2O4 activated peroxydisulfate (PDS). The MnFe2O4 catalyst exhibited highly catalytic...
Aiming at the problem of environmental pollution caused by heavy metals such as Fe, Mn, Cu, and Cr, Sulfate Reducing Bacteria (SRB) were enriched in mining soil. SRB was added to AMD containing different concentrations of Fe, Mn, Cu, and Cr by batch...
Manganese-zinc-ferrite nanoparticles (Mn0.5Zn0.5Fe2O4, MZF-NPs) prepared by an improved co-precipitation method and were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD) and energy dispersive spectrometry (EDS). Then t...
A hydrochloric acid hydrometallurgical process was evaluated for Ni and Co extraction from a low-grade saprolitic laterite. The main characteristics of the process were (i) the application of a counter-current mode of operation as the main leaching s...
Insoluble humic acid/tourmaline composite particles (IHA/TM) were prepared by combining inorganic tourmaline (TM) with the natural organic polymer humic acid (HA) and carbonizing them at 330 °C to study the removal characteristics and mechanism o...
The present study was performed on a 6061-type alloy to examine the effects of minor additions (Si, Mn, Be, Sr) of the type of precipitated Fe-based intermetallics, in terms of Fe/Si ratios. All alloys were grain refined (0.15%Ti in the form of Al-5%...
In present study, a novel Nb-V microalloyed Fe–Mn–Al–C steel and a non-microalloyed Fe–Mn–Al–C austenitic steel were treated with different thermo-mechanical processes. The microstructure of the test steels was obs...
Mn3O4 coated Ru nanoparticles (Ru@Mn3O4) were synthesized via a precipitation-reduction-gel method. The prepared catalysts were evaluated for partial hydrogenation of benzene towards cyclohexene generation by applying ZnSO4, MnSO4 and FeSO4 as reacti...
of 9