- Article
Photocatalytic CO2 reduction is a promising technology for reaching the aim of “carbon peaking and carbon neutrality”, and it is crucial to design efficient photocatalysts with a rational surface and interface tailoring. Considering that...
Photocatalytic CO2 reduction is a promising technology for reaching the aim of “carbon peaking and carbon neutrality”, and it is crucial to design efficient photocatalysts with a rational surface and interface tailoring. Considering that...
In this study, two copper(II) complexes, [Cu(C6H8N3S2)2]Cl2 (1) and [Cu(C7H10N3S2)2]Cl2·H2O (2), were synthesized from 2-(thiophen-2-ylmethylene)hydrazine-1-carbothioamide (L1H) and 2-(1-(thiophen-2-yl)ethylidene)hydrazine-1-carbothioamide (L2...
A carbon supported PtCux/C catalyst, which demonstrates high activity in the oxygen electroreduction and methanol electrooxidation reactions in acidic media, has been obtained using a method of chemical reduction of Pt (IV) and Cu (2+) in the liquid...
Cu2ZnSnS4 (CZTS) is a promising semiconductor material for photovoltaic applications, with excellent optical and electronic properties while boasting a nontoxic, inexpensive, and abundant elemental composition. Previous high-quality CZTS thin films o...
This work provides an alternate unique simple methodology to design and synthesize chemically modified nanophotocatalyst based on high surface area TiO2 nanoparticles that can be used efficiently for the photodegradation of organic pollutants under n...
The electrochemical conversion of CO2 into value-added chemicals is a promising approach for addressing environmental and energy supply problems. In this study, electrochemical CO2 catalysis to ethanol is achieved using incorporated Cu/CuxO nanoparti...
The development of innovative antimicrobial materials is crucial in thwarting infectious diseases caused by microbes, as drug-resistant pathogens are increasing in both number and capacity to detoxify the antimicrobial drugs used today. An ideal anti...
In the present study, we propose a new photocatalytic interface prepared by high-power impulse magnetron sputtering (HiPIMS), and investigated for the degradation of Reactive Green 12 (RG12) as target contaminant under visible light light-emitting di...
A tunable and efficient strategy was adopted to synthesize highly porous nano-structured CuO−carbonized composites (CuxO@C) using Cu3(BTC)2 as a sacrificial template. The as-synthesized CuO nanocomposites exhibited hollow octahedral structures,...
CuxCo1-xFe2O4 (x = 0.33, 0.67, 1)-reduced graphene oxide (rGO)-thermoplastic polyurethane (TPU) nanocomposites exhibiting highly efficient electromagnetic interference (EMI) shielding were prepared by a melt-mixing approach using a microcompounder. S...
Fe2−xCuxZr2−xWxO7 (x: 0, 0.05, 0.015) nanoparticles were synthesized following the Pechini method and characterized via X-ray diffraction (XRD), transmission electron microscopy (TEM), and diffuse reflectance spectroscopy (DRS) measuremen...
Glutathione-capped copper sulfide (CuxSy) nanoparticles with two different average sizes were successfully achieved by using a simple reduction process that involves only changing the reaction temperature. Temperature-induced changes in the size of C...
Composition-tuned Zn1−xCuxO (x = 0.0, 0.1, and 0.2) nanoparticles were synthesized via a facile co-precipitation method and investigated as wurtzite oxide anodes for sodium-ion batteries (SIBs). This work focuses on establishing an electro-opti...
Composite nanomaterials have been widely used in catalysis because of their attractive properties and various functions. Among them, the preparation of composite nanomaterials by redox has attracted much attention. In this work, pure Cu2O was prepare...
In an effort to produce alkenes in an energy-saving way, this study presents for the first time a photocatalytic process that allows for the obtention of ethylene with high selectivity from propionic acid (PA) degradation. To this end, TiO2 nanoparti...
Designing highly active material to fabricate a high-performance noninvasive wearable glucose sensor was of great importance for diabetes monitoring. In this work, we developed CuxO nanoflakes (NFs)/Cu nanoparticles (NPs) nanocomposites to serve as t...
Nanosized titanium dioxide (TiO2) is currently being actively studied by the global scientific community, since it has a number of properties that are important from a practical point of view. One of these properties is a large specific surface, whic...
This concise review delves into the realm of superparamagnetic nanoparticles, specifically focusing on Fe2O3, Mg1+xFe2−2xTixO4, Ni1−xCux, and CrxNi1−x, along with their synthesis methods and applications in magnetic hyperthermia. Re...
The regulation of the active sites of a catalyst is important for its application. Herein, a series of Ag1Cux/SBA-15 catalysts with different molar ratios of Ag to Cu were synthesized via the impregnation method, and the active sites of Ag1Cux were r...
Monometallic nanoparticles tend to aggregate and exhibit limited catalytic performance, rendering them inadequate for high-efficiency electrocatalytic applications. In this study, a green and mild liquid-phase reduction method was employed, using sod...
This work reports the synthesis of CuxSny alloy aerogels for electrochemical CO2 reduction catalysts. An in situ reduction and the subsequent freeze-drying process can successfully give CnxSny aerogels with tuneable Sn contents, and such aerogels are...
Experimental protocols based on Electron Paramagnetic Resonance (EPR) and Raman spectroscopy are presented for the investigation of the Fe(II) spin transition in Cu(II)-doped 1-D spin-crossover (SCO) nanoparticles of the type [Fe1−xCux(NH2trz)3...
This study systematically investigates the impact of Cu2+ doping on the structural, magnetic, and magnetocaloric properties of CuxCo1−xCr2O4 nanoparticles synthesized via a solution combustion method. Cu incorporation up to x = 20% induces a pr...
The copper (Cu) substitution in barium hexaferrite (BaFe12O19) crystals from the sol-gel auto-combustion synthesis is demonstrated as a cost-effective pathway to achieve alterable magnetic properties. Subsequent heat treatments at 450 °C and 1050 °C...
The incorporation of the metal phase into cellulose hydrogels, resulting in the formation of metallogels, greatly expands their application potential by introducing new functionalities and improving their performance in various fields. The unique ant...
Copper-doped zinc oxide nanoparticles (NPs) CuxZn1−xO (x = 0, 0.01, 0.02, 0.03, and 0.04) were synthesized via a sol-gel process and used as an active electrode material to fabricate a non-enzymatic electrochemical sensor for the detection of glucose...
Enhancing the oxidation resistance of copper nanoparticles (CuNPs) is a crucial objective in plasmonic photocatalytic reactions. In this study, a series of Cu/X catalysts was synthesized using semiconductor nanomaterials (X = TiO2, ZnO, BN, TiN, SiC,...
Titania is very famous photocatalyst for decomposition of organic pollutants. Its photocatalytic properties significantly depend on the morphology and chemical composition of the samples. Herein, the TiO2 nanotubes/CuxO nanoheterostructures have been...
Non-noble CuxNi1−x (x = 0, 0.1, 0,2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1) alloy nanoparticles supported on poly(vinylidene fluoride-co-hexafluoropropene) (PVDF-HFP) nanofibers (NFs) are successfully fabricated. The fabrication process is execu...
Mesoporous Cu(Fe)/SBA-15 catalysts were prepared with distinct metal loadings of ca. 2–10 wt.%. A detailed set of characterizations using X-ray diffraction (XRD), electron paramagnetic resonance (EPR), transmission electron microscopy (TEM), sc...
Water pollution by heavy metals is one of the most serious worldwide environmental issues. With a focus on copper(II) ions and copper complex removal, in the present study, ultra-small primary CoFe2O4 magnetic nanoparticles (MNPs) coated with octadec...
Oxidation is an important organic transformation, and several catalysts have been reported for this conversion. In this study, we report the synthesis of mixed metal oxide CuxZnyO, which is prepared by a coprecipitation method by varying the molar ra...
To address the urgent demand for eco-friendly and low-cost catalysts to replace toxic heavy-metal additives in energetic materials, this work focuses on developing biomass-derived copper-doped porous carbon (CuPC) as a high-efficiency catalyst for th...