Al2O3 ceramics are widely used in vacuum electronic devices. However, surface flashover in a vacuum during the application of high voltage significantly influences their reliability and restricts the development of vacuum electronic devices. The seco...
Cr-doped Al2O3 spheres with strong red emission were produced using a simple laser processing approach with a 50 W continuous CO2 laser. Structural characterization revealed that the produced spheres were monophasic, comprising the α-Al2O3 phas...
We describe our studies of the influence of Cr content in an Al2O3-Cr composite on its thermal and electrical conductivity properties during and after electron-beam sintering in the forevacuum range of pressure. Sintering was carried out using a plas...
Waste nitrous oxide (N2O) was utilized as an oxidant for ethane oxydehydrogenation reaction at the temperature range from 450 °C to 700 °C over the mesoporous Cr/Al2O3 catalyst synthesized via the one-pot evaporation-induced self-assembly (EISA) meth...
A dense Cr2O3/Al2O3 composite coating was fabricated on 321L stainless steel by electrodepositing an Al2O3 layer on a Cr2O3 coating. The composition, structure, and properties of the obtained ceramic coating were investigated. The results showed that...
A hollow nanostructure is attractive and important in different fields of applications, for instance, solar cells, sensors, supercapacitors, electronics, and biomedical, due to their unique structure, large available interior space, low bulk density,...
Al2O3-Cr2O3 refractories are completely substitution solid solutions and can effectively resist slag erosion when used as an industrial furnace lining. In order to provide suitable chromium corundum refractory with excellent slag resistance and mecha...
The increasing demand for high-performance aircraft engines has led to a greater emphasis being placed on advanced sealing coating technologies. Developing long-life, self-lubricating, and wear-resistant coatings is of significant research value. Thi...
Cermet coatings with ceramic and metal characteristics will play an increasingly important role in extending the service life of critical components in harsh service environments. In this paper, CoCrAlTaY-30Al2O3 (wt.%) cermet coating was prepared by...
In this work, the interface bonding properties of Al2O3/CoCr metal matrix composites were calculated using first principles after Al2O3 was added to traditional CoCr alloys. The phase and microstructure of the CoCr alloy and the Al2O3/CoCr metal matr...
In this study, the CoCrAlYTa-10%Al2O3 coatings were prepared by the high-velocity oxygen-fuel (HVOF) spraying. A series of ball-on-disk sliding wear tests were conducted to evaluate the tribological properties of the coatings at different temperature...
Seven FeCrAlY-Al2O3 nanoceramic composite coatings are deposited on F/M steel via plasma spraying and laser remelting. A systematic investigation is conducted to examine the dependence of microstructure, mechanical properties, and lead–bismuth...
The blades of modern gas turbine engines are complex structures made of heat-resistant nickel alloys with a complex system of internal cavities. The article describes a method of strengthening samples of a heat-resistant Ni-Cr alloy by applying a com...
Al2O3, Cr2O3, and TiO2 are most commonly used oxide materials for thermal spray coating solutions. Each oxide shows unique properties comprising behavior in the spray process, hardness, corrosion, and wear resistance. In order to exploit the differen...
To reduce the lightness and enhance the thermal resistance of Al-pigmented low-emissivity coatings, CuCr2O4 pigment was introduced into the coating system via ball milling. The results revealed that both ball milling time and Al: CuCr2O4 mass ratio s...
Cr8O21 can be used as the cathode material in all-solid-state batteries with high energy density due to its high reversible specific capacity and high potential plateau. However, the strong oxidation of Cr8O21 leads to poor compatibility with polymer...
Aluminum rich nitride coatings are often used to protect cutting tools and prolong their service life. In this work, a preoxidation technique and duplex coating design were combined to further improve the bearing capacity and heat resistance of cutti...
In the present study, a finite element-based numerical simulation approach was employed to investigate the temperature field distribution and variations in molten pool dimensions during the selective laser melting (SLM) forming process of Al2O3/CoCr...
Aluminum oxide (Al2O3) powder can be added to typical cobalt-chromium (CoCr) alloy powders. In the present study, we successfully prepared alloyed samples of various powder ratios by laser cladding and analyzed their microstructure and carbide struct...
For improving the wear properties of NiCrAlY, the 10 wt %, 20 wt % and 30 wt % ZrO2-added NiCrAlY samples were prepared by ultrasonic-assisted direct laser deposition, respectively. The results showed that the ultrasonic-assisted direct laser deposit...
LEDs for plant lighting have attracted wide attention and phosphors with good stability and deep-red emission are urgently needed. Novel Cr3+ and Dy3+ co-doped Gd3Al4GaO12 garnet (GAGG) phosphors were successfully prepared through a conventional soli...
The thermophysical performance and solid mechanics behavior of UO2-36.4vol % BeO fuel pellets cladded with Zircaloy, SiC, and FeCrAl, and Zircaloy cladding materials coated with SiC and FeCrAl, are investigated based on simulation results obtained by...
Polycrystalline samples AlFe0.95Cr0.05O3 synthetized by a solid state (SR) and a co-precipitation (cop) method show an orthorhombic system in space group Pc21n. It was found that, the cation distribution and magnetic ordering vary toughly on the synt...
A new type of high-entropy alloy, a nitride-based (AlCrTiZrMo)N/ZrO2 nano-multilayered film, was designed to investigate the effect of ZrO2 layer thickness on the microstructure, mechanical properties, and thermal stability. The results show that whe...
In order to attain phosphor ceramics with a high Color-Rendering Index (CRI), samples with the composition of Y0.997−xRexCe0.003)3(Al0.9748 Mn2+0.024Cr3+0.0012)5O12(Rex = 0, Gd0.333, Gd0.666, Gd0.997, Tb0.333, Tb0.666, Tb0.997 and Lu0.997 were...
Al2O3-CaO-Cr2O3 castables are used in various furnaces due to excellent corrosion resistance and sufficient early strength, but toxic Cr(VI) generation during service remains a concern. Here, we investigated the relative reactivity of analogous Cr(II...
In the present work, novel Al2O3 particles were used to reinforce heterogeneous CoCrFeMnNi high-entropy alloy (HEA) matrix composites with nano- (5.0 wt.%) and nano- + micro- (5.0 wt.% + 10.0 wt.%) specimens. Al2O3 particles were fabricated via gas a...
In the present work, for the first time, the possibility of formation of CrAl2O4 was shown from the equimolar mixture of co-precipitated Al2O3 and Cr2O3 oxides under a reductive environment. The crystallographic properties of the formed compound were...
In order to prevent the lead-bismuth eutectic (LBE) corrosion of stainless-steel components used in nuclear reactors, the FeCrAlTiC-xY2O3 coatings were prepared on 304 stainless steel (304SS) by laser cladding. After adding Y2O3, Y2TiO5 and Y2Ti2O7 f...
This paper investigates the oxidative dehydrogenation of ethane to produce ethylene at low temperatures (500 °C) in metallic structured substrates. To check this point, the FeCrAlloy® monoliths with different channel sizes (289–2360 cps...
With the development of vacuum electronic devices toward high power, high frequency, and miniaturization, the voltage holdoff capacity of the insulation materials in devices has also been raised to a higher demand. Cr/Mn/Ti-doped Al2O3 ceramics were...
The purpose of this in vitro study was to determine the effect of airborne-particle abrasion process parameters on the strength of the Ni-Cr alloy–ceramic bond. One hundred and forty-four Ni-Cr disks were airborne-particle abraded with 50, 110...
AlCr-based hard nitride coatings with different chemical compositions and architectures have been successfully developed and applied over the last few decades. Coating properties are mainly influenced by deposition conditions and the Al/Cr content. T...
The paper deals with the (Cr1−xAlx)N coating containing 17 to 54 % Al which is deposited on AISI 430 stainless steel stationary substrates by short-pulse high-power dual magnetron sputtering of Al and Cr targets. The Al/Cr ratio in the coating...
An inorganic thermochromic material based on Cr-doped Al2O3 is synthesized using a solid-state method. The crystal structure, chemical composition, and morphology of the synthesized material are analyzed using X-ray diffraction, scanning electron mic...
Solid oxide fuel cell (SOFC) systems often employ metallic cathode air pre-heaters (CAPHs), frequently made from alloys with high chromium (Cr) content, to recover thermal energy from exhaust gases and pre-heat incoming air and fuel. Cr evaporation f...
Industrial tests and thermodynamic calculations were utilized to investigate the source and formation of magnetic particle inspection defects identified on the near-surface of the Cr5 back-up roll forged ingot, which was used in large cold rolling mi...
The microstructures, phase compositions, and high-temperature oxidation behavior of a NiCrAlY coating fabricated by arc ion plating were investigated by scanning electron microscopy (SEM), energy dispersive spectrometer (EDS), atomic force microscope...
8 July 2022
Zero-valent iron (ZVI) is widely used for groundwater remediation, but suffers from high electron consumption because of its free contact with non-target substrates such as O2. Here, ZVI-ALOX particles were prepared via in situ NaBH4 aqueous-phase re...
This work focuses on the production of gradient composite materials with an alumina matrix containing copper and chromium and examines the effect of the reinforcement and casting speed on the obtained microstructure. Al2O3-Cu-Cr composites with a mic...
A type of Fe-21.3Cr-3.5Al-0.5Ti-0.4Zr steel was produced for application of spot-welding location pins in automobile industry. The oxidation behavior at temperatures of 1220–1340 °C and wear performance were investigated. The morphologies a...
Boron and oxygen-doped Cr–Al–Ti–N coatings were deposited by closed field unbalanced magnetron sputtering (CFUBMS) of TiB target manufactured by self-propagating high-temperature synthesis, and Ti, Cr, and Al targets. To evaluate th...
Dosimetry is a widespread material science field dealing with detection and quantification of ionizing radiation using electronic processes in materials. One of the main aspects that determines the performance of dosimeters is the type of defects the...
The conductive bridge random access memory (CBRAM) device has been widely studied as a promising candidate for next-generation nonvolatile memory applications, where Cu as an electrode plays an important role in the resistive switching (RS) process....
In order to improve the seawater corrosion resistance of Inconel 718 superalloy, a La2Zr2O7/NiCoCrAlY thermal barrier coating corrosion resistant to 3.5 wt.% NaCl aqueous solution was prepared by laser cladding on Inconel 718 superalloy. X-ray diffra...
This paper investigates the influence of the technological parameters of detonation spraying on the phase composition of NiCr- and Al2O3-based coatings. It was determined that the phase composition of Al2O3 coatings during detonation spraying strongl...
The composition of nickel-based metal matrix NiCrBSi was varied with 5%, 10% and 15% of Al2O3 particles to obtain high wear resistant coatings by means of a high-velocity oxy fuel (HVOF) thermal spraying process. The coating was characterized by opti...
In this study, in order to improve the characteristics of the vegetable-based cutting fluids used in the MQL technique and increase the machining performance of MQL and its positive effects on sustainable manufacturing, the effects of the MQL method...
Reoxidation has long been a problem when casting ultra-low oxygen liquid steel. An experimental study of the reoxidation phenomenon caused by Cr2O3-bearing cover flux of Al-killed steel is presented here. MgO-CaO-SiO2-Al2O3-Cr2O3 tundish cover flux w...
High temperature surface acoustic wave sensors based on radio frequency identification technology require adequate antennas of high efficiency and thermal stability for the signal transmission. Platinum is well known and frequently used as a material...
of 16