2,489 Results Found

Nickel-based Ni-Cr-Si-B self-fluxing alloys are excellent candidates to replace cobalt-based alloys in aeronautical components. In this work, metal additive manufacturing by directed energy deposition using a laser beam (DED-LB, also known as LMD) an...

Investigation of high-entropy alloys in form of bulk samples as well as thin films is currently one of the fastest growing areas in the study of metal alloys. In this paper, a bulk sample of FeNiCoCuCr high-entropy alloy ingot with equimolar composit...

This study investigates the mineral chemistry and iron isotope composition of the Pertek Fe-skarn deposit in the Eastern Taurides, Turkey, to elucidate skarn formation and ore genesis through chemical and isotopic parameters. The deposit consists of...

On the basis of geochemical whole-rock and mineralogical point analyses, the concentrations of V and Co were determined in magnetite-ilmenite oxide ores, associated with sulphides, at the Krzemianka and Udryn deposits in the Mesoproterozoic Suwał...

Laser directed energy deposition (LDED) can be deployed for depositing high-performance materials for various engineering applications. Alumina-forming steel is a high-performance material that possesses excellent corrosion and oxidation resistance,...

Laser direct energy deposition (LDED) has been widely employed in surface modification and remanufacturing. Achieving high-precision geometries and superior mechanical properties in cladding layers remains a persistent research focus. In this study,...

This study investigated the microstructural and compositional behavior of Fe-Cr-Si clads produced in stainless steel (STS) 316 L with a decreased laser traverse speed using directed energy deposition (DED). The substrate of all specimens was mostly c...

The coefficient of linear thermal expansion and the specific heat capacity of laser-deposited Cu-Fe alloys fabricated from tin, aluminum, chromium bronze (89–99 wt.% Cu), and SS 316L were studied. The investigated alloys had a 1:1 and a 3:1 bro...

The choice of a catalyst for carbon nanotube (CNT) growth is critical to controlling the morphology and chirality of the final product. Plasma-enhanced chemical vapor deposition (PECVD) can alleviate the requirements of the catalyst, i.e., they must...

Fe isotopes have been applied to the petrogenesis of ore deposits. However, the behavior of iron isotopes in the mineralization of porphyry-skarn deposits is still poorly understood. In this study, we report the Fe isotopes of ore mineral separations...

Kenoargentotetrahedrite-(Fe) is observed as greenish-grey anhedral grains, 50–150 μm in size, in association with galena, sphalerite and chalcopyrite in the Bajiazi Pb-Zn deposit of magmatic-hydrothermal type, Liaoning, China. The empirical...

A comprehensive nanoscale study on magnetite from samples from the outer, weakly mineralized shell at Olympic Dam, South Australia, has been undertaken using atom-scale resolution High Angle Annular Dark Field Scanning Transmission Electron Microscop...

The Tumanpınarı mineralization is a volcanic rock-hosted epithermal Fe-Mn-Ba deposit located in the southwestern part of Dursunbey, Balıkesir, Turkey. The deposit constitutes one of the most important deposits of the Havran-Dursunbey metallogenic sub...

Lithium iron phosphate (LiFePO4 or LFP) is a promising cathode material for lithium-ion batteries (LIBs), but side reactions between the electrolyte and the LFP electrode can degrade battery performance. This study introduces an innovative coating st...

Following the worldwide increasing demand for Critical Raw Materials (CRMs), the Hellenic Geological Survey (HSGME) implemented a national project focused on the re-evaluation of certain Public Mining Areas in Greece. In this framework, exploration a...

Worldwide, a growing list of critical (Bi, Co, Cu, F, Fe, Mo, Ni, P, PGE, REE, W, U, and Zn) and precious metal (Ag and Au) resources have been identified in mineral systems forming Fe-oxide-copper-gold (IOCG) deposits; Fe-oxide-apatite (IOA); Fe-sul...

Leptothrix species, one of the Fe/Mn-oxidizing bacteria, oxidize Fe(II) and produce extracellular, microtubuar, Fe-encrusted sheaths. Since protein(s) involved in Fe(II) oxidation is excreted from Leptothrix cells, the oxidation from Fe(II) to Fe(III...

The Jbel Rhals deposit, located in the Oriental High Atlas of Morocco, hosts a polymetallic Fe-Mn-Cu ore. Large metric veins of goethite and pyrolusite cut through Paleozoic schists that are overlaid by Permian-Triassic basalts and Triassic conglomer...

The Biggenden gold-bearing Fe skarn deposit in southeast Queensland, Australia, is a calcic magnetite skarn that has been mined for Fe and gold (from the upper portion of the deposit). Skarn has replaced volcanic and sedimentary rocks of the Early Pe...

The Bayan Obo deposit, located on the northern margin of the North China Plate (NCP), is the world’s largest comprehensive Fe-REE-Nb deposit. After its formation, this deposit was affected by multiple tectonic thermal events, but the ages of th...

To solve the problem of the low coercivity of Nd-Fe-B-based nanowires impeding their application in magnetic storage media, highly ordered Nd-Fe-B/Fe-Co composite nanowires were fabricated in an anodic alumina template by means of the alternating ele...

The Dahongshan large-scale iron (Fe)–copper (Cu) polymetallic deposit is in the Proterozoic metallogenic domain on the western margin of the Yangtze Block. It is a typical representative of Fe-Cu polymetallic composite mineralization in the Kan...

Only a few iron precursors that can be used in the atomic layer deposition (ALD) of iron oxides have been examined thus far. This study aimed to compare the various properties of FeOx thin films deposited using thermal ALD and plasma-enhanced ALD (PE...

In rotary hearth furnace (RHF) production, the heat transfer system will produce deposition, which blocks the exhaust channel. The formation of deposition will affect RHF production. In this study, the formation mechanism of deposition was determined...

Two new mineral species, vorontsovite, ideally (Hg5Cu)TlAs4S12, and ferrovorontsovite, ideally (Fe5Cu)TlAs4S12, the Tl- and Tl–Fe-analogues of galkhaite, respectively, have been discovered at the Vorontsovskoe gold deposit, Northern Urals, Russ...

With the development of the steel industry, China’s demand for niobium is increasing. However, domestic niobium resources are not yet stably supplied and are heavily dependent on imports from abroad (nearly 100%). It is urgent to develop domest...

FeCo thin films with high saturation magnetization (4 πMs) can be applied in high-frequency electronic devices such as thin film inductors and microwave noise suppressors. However, due to its large magnetocrystalline anisotropy constant and magnet...

A series of heavily Fe-doped LiNbO3 (LN:Fe) crystals were grown via the Czochralski method. The dark- and photo-conductivity of the 5.0 wt.% Fe-doped LiNbO3 crystal reached 3.30 × 10−8 Ω−1 cm−1 and 1.46 × 10−...

This study investigates the structural phase and dielectric properties of poly(vinylidenefluoride-co-trifluoroethylene) (P[VDF–TrFE]) thin films grown via atmospheric pressure (AP) plasma deposition using a mixed polymer solution comprising P[V...

The formation mechanism of deposits in commercial gas-fired magnetization-reduction roasting rotary kiln was studied. The deposits ring adhered on the kiln wall based on the bonding of low melting point eutectic liquid phase, and the deposit adhered...

In the present study, we report on the successful synthesis of hollow iron oxide nanospheres. The hollow Fe3O4 nanospheres were synthesized following a four-step procedure: electrospraying spherical PVP particles, coating these particles with alumina...

The study of the influence of microorganisms on the formation of deep- and shallow-water ore deposits is a promising topic in environmental science. This problem, along with the role of organic matter in the growth of Fe-Mn nodules, remains understud...

The present study deals with the physicochemical and catalytic/kinetic investigation of Fe, Au, Fe-Au, and Mo-Au modified Ni/GDC electrocatalysts towards their performance for the DRM, RWGS, and CH4 decomposition reactions. For this purpose, Au-NiO/G...

The grain boundary diffusion process employing a mixed diffusion source, comprising heavy rare-earth elements and low-melting metals, significantly enhances the coercivity (Hcj) of sintered Nd-Fe-B magnets. In the present study, Tb and Ga were deposi...

The technical evolution of unmanned aerial systems (UAS) for mineral exploration advances rapidly. Recent sensor developments and improved UAS performance open new fields for research and applications in geological and geophysical exploration among o...

A large, low-grade Fe–Ti–V oxide deposit occurs within the Xiaohaizi Ultramafic–Mafic intrusion. Based on petrographic observations and electron probe microanalysis (EPMA) of amphibole, this study examines the magmatic evolution and...

The use of Fe films as multi-element targets in space radiation experiments with high-intensity ultrashort laser pulses requires a surface structure that can enhance the laser energy absorption on target, as well as a low concentration and uniform di...

The Shuikoushan deposit is an economic ‘skarn-type’ polymetallic Pb-Zn deposit in South China. The deposit is located at the southern margin of the Hengyang basin in the northern part of the Nanling Range. Recently, economic Fe-Cu mineralization that...

Among energy storage devices, supercapacitors have received considerable attention in recent years owing to their high-power density and extended cycle life. Researchers are currently making efforts to improve energy density using different asymmetri...

Globally, most skarn deposits show a direct relationship with magmatic activity, indicating a genetic link between the geochemical composition of causative plutons and the metal content of associated skarns. Therefore, this study investigated the Ear...

Porphyry Cu-Mo deposits, which are the most important sources of copper and molybdenum, are typically processed by flotation. In order to separate Cu and Mo minerals (mostly chalcopyrite and molybdenite), the strategy of depressing chalcopyrite while...

The Bayan Obo deposit is the largest REE resource in the world. Although many isotopic dating methods have been applied, ages based on petrography and closure temperatures still lack discussion. In this study, three digital petrographic images were c...

The Early Permian Tarim Large Igneous Province is a prominent magmatic-metallogenic province in China, hosting significant Fe-Ti mineralized mafic-ultramafic intrusions. Among them, the Wajilitag Fe-Ti oxide deposit stands out, which is hosted by oli...

An appropriate writing field is very important for magnetic storage application of L10 FePt nanocomposite thin films. However, the applications of pure L10 FePt are limited due to its large coercivity. In this paper, the ratios of L10 and non-L10 pha...

Compositional variations of major and minor elements were examined in Pt–Fe alloys from various geological settings and types of deposits, both lode and placer occurrences. They included representatives of layered intrusions, Alaskan-Uralian-(Aldan)-...

Skarn-type iron ore is economically significant, and numerous skarn ore deposits have been identified in the North China Craton. The newly discovered orbicular diorite in this region is distinguished from other analogous rocks due to the accumulation...

Monolithic integration of permanent micromagnets into MEMS structures offers many advantages in magnetic MEMS applications. A novel technique called PowderMEMS, based on the agglomeration of micron-sized powders by atomic layer deposition (ALD), has...

Carbon nanotubes are a material with excellent properties, which result in a wide range of possible applications, from electronics to medicine. This paper presents the investigation of the possibility of Fe-MWCNTs’ application as heating agents...

The Han–Xing (Handan–Xingtai) region is famous for its endowment of skarn iron deposits in China. These deposits are mainly spatially and genetically associated with diorite rocks, but these rocks show different Fe ore potential. Major an...

The Matra As–Sb deposit (Alpine Corsica, France) is hosted in the normal N–S trending Matra Fault. Sulfide minerals in ore consist of realgar, stibnite, and pyrite with minor orpiment and hörnesite. The gangue includes quartz, dolomi...