Plasma treatment of wood surfaces has shown significant effects, but different excitation methods used for different species of wood generally result in varied characteristics of wood surfaces. Secondly, plasma modification greatly enhances the absor...
In this study, we present the results of the effect of duplex surface modification of 304-L stainless steel substrates by an electron-beam treatment (EBT) and subsequent deposition of diamond-like carbon coatings on the surface roughness and corrosio...
The sand-blasting and acid etching (SLA) method can fabricate a rough topography for mechanical fixation and long-term stability of titanium implant, but can not achieve early bone healing. This study used two kinds of plasma treatments (Direct-Curre...
H2S plasma created by an electrode-less radio-frequency discharge was used to modify the surface properties of the polymer polyethylene terephthalate. X-ray photoelectron spectroscopy, secondary ion mass spectrometry and atomic force microscopy were...
The aim of this study was to assess the effects of commercially available and relatively inexpensive enzyme preparations based on endo 1,4-β-xylanase, pectinase and xyloglucanase on the thermal (TGA), morphological (SEM), chemical (FT-IR) and me...
The present work investigates the effects of an environmentally friendly treatment based on supercritical carbon dioxide (scCO2) on the interfacial adhesion of flax fibers with thermoset matrices. In particular, the influence of this green treatment...
Increasing the use of wood in buildings is regarded by many as a key solution to tackle climate change. For this reason, a lot of research is carried out to develop new and innovative wood surface improvements and make wood more appealing through fea...
While polymers are widely utilized materials in the biomedical industry, they are rarely used in an unmodified state. Some kind of a surface treatment is often necessary to achieve properties suitable for specific applications. There are multiple met...
In this study, a Mg3Zn alloy and a Mg3Zn1HA nanocomposite were fabricated through disintegrated melt deposition, followed by the hot extrusion process. The specimens were subjected to fiber laser surface modification in air and demineralized water (D...
The effect of low-temperature plasma treatment on the surface properties of thermoplastic starch film (TPS) was investigated. The surface layer (SL) modification of polymeric materials is mainly carried out to improve wettability and adhesive propert...
Titanium membranes are used for guided bone regeneration in implant therapy. However, as a bioinert material, titanium does not have the ability to accelerate bone formation. Various titanium surface treatments to confer bioactivity have been demonst...
Heat-assisted plasma (HAP) treatment using He gas is known to improve the adhesive-bonding and adhesive-free adhesion properties of polytetrafluoroethylene (PTFE). In this study, we investigated the effects of He and Ar gaseous species on the HAP-tre...
Recent advancements in nanotechnology and materials science have enabled the development of magnetic photocatalysts with improved efficiency, stability, and reusability, offering a promising approach for wastewater treatment. The integration of magne...
Surface modification of 3D-printed PLA structures is a major issue in terms of increasing the biofunctionality and expanding the tissue engineering applications of these parts. In this paper, different exposure times were used for low-pressure oxygen...
In this paper, we describe the surface modification of polytetrafluoroethylene (PTFE) through the plasma treatment process. Several parameters including different active gases, RF power, distance between the plasma source and sample, and plasma durat...
The effect of argon (Ar) and oxygen (O2) gases as well as the treatment times on the properties of modified bamboo fibers using dielectric barrier discharge (DBD) plasma at generated power of 180 W were investigated. The plasma treatment of bamboo fi...
This study’s aim is a comparison of the plasma-induced effects on polymers exposed in helium and argon gaseous environments in a pulsed dielectric barrier discharge at atmospheric pressure. Cellulose-based and synthetic polymers are tested with...
In this work, we have developed a hydrothermal method to modify g-C3N4 with hydroxyl surface modification. Modified g-C3N4 has exhibited higher photocatalytic activity in the removal of phenolic compounds under visible light. The improvement may be d...
Although atmospheric pressure plasma jets (APPJs) have been widely employed for materials modification, they have some drawbacks, such as the small treatment area (couple of cm2). To overcome this limitation, a funnel-like APPJ with a wide exit has b...
The oral cavity harbors complex microbial communities, which leads to biomaterial-associated infections (BAI) during dental and orthopedic treatments. Conventional antibiotic treatments have met great challenges recently due to the increasing emergen...
Polyimide films are currently of great interest for the development of flexible electronics and sensors. In order to ensure a proper integration with other materials and PI itself, some sort of surface modification is required. In this work, microwav...
Inert polymeric implants must evolve to enhance their biological interactions with host tissue, triggering positive cellular responses and promoting tissue bonding and integration. Poly-ether-ether-ketone (PEEK) is widely used as an implant material;...
Due to their large compatibility difference, polyethylene (PE) and polyoxymethylene (POM) cannot be welded together by laser transmission welding. In this study, PE and POM are pretreated using plasma that significantly enhances their laser transmiss...
The great potential of regenerated cellulose fibers, which offer excellent possibilities as a matrix for the design of bioactive materials, was the lead for our research. We focused on the surface modification of fibers to improve the sorption proper...
Polytetrafluoroethylene (PTFE), commercially known as Teflon, is a fluoropolymer with a structure containing (CF2–CF2)n. It has high resistance to acids, alkalis and corrosive chemicals. PTFE is hydrophobic in nature with a water contact angle...
A plasma- and precursor-assisted biomimetic process utilizing plasma and alternate dipping treatments was applied to a Leed-Keio artificial ligament to produce a thin coating of apatite in a supersaturated calcium phosphate solution. Following plasma...
Titanium implants undergo an aging process through surface hydrocarbon deposition, resulting in decreased wettability and bioactivity. Plasma treatment was shown to significantly reduce surface hydrocarbons, thus improving implant hydrophilicity and...
The topography and chemical composition modification of titanium (Ti) implants play a decisive role in improving biocompatibility and bioactivity, accelerating osseointegration, and, thus, determining clinical success. In spite of the development of...
Polydimethylsiloxane (PDMS) has attracted great attention in various fields due to its excellent properties, but its inherent hydrophobicity presents challenges in many applications that require controlled wettability. The purpose of this review is t...
Standard glass fiber filter media were chemically modified with suitably chosen surface-active agents. The aim of these modifications was to improve the three fundamental filtration performance characteristics, namely, to increase the separation effi...
This study investigates the modification and application of natural, micro-scale magnetite (Fe3O4)—an iron oxide mineral and one of the most abundant iron ores in the world—as a magnetic carrier for removing six common types of microplast...
In this investigation, a duplex surface modification of M2 high-speed steel (HSS) was demonstrated, including electron beam treatment (EBT) followed by a tungsten nitride (WN) coating deposition. The influence of the EBT of the substrate on the funct...
Recently, natural as well as synthetic polymers have been receiving significant attention as candidates to replace non-renewable materials. With the exponential developments in the world each day, the collateral damage to the environment is incessant...
25 February 2022
Kapok fiber (Ceiba pentandra) belongs to a group of natural fibers that are mainly composed of cellulose, lignin, pectin, and small traces of inorganic compounds. These fibers are lightweight with hollow tubular structure that is easy to process and...
Biodegradable polymers (poly(butylene succinate (PBS)), poly(butylene adipate terephthalate (PBAT)) and poly(lactic acid)/poly(butylene adipate terephthalate (PLA/PBAT)) blend) were treated in radiofrequency (13.56 MHz) low-pressure (10 Pa) oxygen wi...
Polyurethane/urea copolymers based on poly(ethylene glycol) (PURPEG) were exposed to weakly ionized, highly reactive low-pressure oxygen plasma to improve their sorption kinetics. The plasma was sustained with an inductively coupled radiofrequency ge...
Produced water (PW) generated from oil and gas operations poses a significant environmental challenge due to its high salinity and complex organic–inorganic composition. This study evaluates forward osmosis (FO) as an energy-efficient approach...
In this work, the influence of thermal (TT), mechanical, and thermomechanical (TMT) treatments using the ultrasonic nanocrystal surface modification (UNSM) on the corrosion protection properties of Inconel 718 was studied, correlating the changes in...
The laser processing of the titania nanotubes has been investigated in terms of morphology, structure, and optical properties of the obtained material. The length of the nanotubes and crystallinity, as well as the atmosphere of the laser treatment, w...
Our previous work has shown that for cardiac applications, combining low-temperature plasma oxidation with an amorphous carbon coating (a-C:N:H type) constitutes a prospective solution. In this study, a short-term modification by low-temperature oxyg...
20 May 2022
Implant surfaces are known to influence the osseointegration process; therefore, their modifications represent an important subject of investigation. On this basis, the purpose of this study was to evaluate the response of human oral osteoblasts (hOB...
This study presents the effect of non-thermal plasma modification on the changes of surface morphology, color characteristics and electrical conductivity of wool fabric dyed with intrinsically conductive polymer (ICP) poly (3,4-ethylenedioxythiophene...
Poly(butylene succinate) (PBS) films were processed by a radio frequency (RF; 13.56 MHz) low-pressure plasma of oxygen and argon/oxygen, and an oxygen plasma with an argon post-crosslinking plasma to improve their wettability property. Specimens were...
Titanium (Ti) and its alloys have been demonstrated over the last decades to play an important role as inert materials in the field of orthopedic and dental implants. Nevertheless, with the widespread use of Ti, implant-associated rejection issues ha...
The effect of surface modification by an arc discharge plasma in a nitrogen flow with treatment durations of 5 and 10 min on the physicochemical properties and biocompatibility of the surface of composites based on polylactic acid and hydroxyapatite...
The management of end-of-life tires (ELTs) is one of the main environmental issues that society faces nowadays. Recycling of ELTs appears as one feasible option for tackling the problem, although their incorporation as ground tire rubber (GTR) in oth...
Due to the spontaneous degradability, excellent biocompatibility, favorable bone−inducibility, and antimicrobial properties, Mg−based alloys acting as miniature intravascular stents and bone−fixation materials have shown great devel...
Frequent oil spills have caused serious consequences to the ecosystem and environment. Therefore, in order to reduce and eliminate the impact of oil spills on biology and the environment, oil spill remediation materials must be considered. As a kind...
As the world human population and industrialization keep growing, the water availability issue has forced scientists, engineers, and legislators of water supply industries to better manage water resources. Pollutant removals from wastewaters are cruc...
Sulfuric acid anodizing assisted by a hydrothermal sealing with inhibitors [Ce3+-Mo6+] was used to prevent pitting corrosion on spray-deposited hypereutectic Al–Si alloy (A390). An investigation concerning the evaluation of pitting corrosion re...
of 45