124 Results Found

Recent advances in glass-ceramics research have expanded their applications in astronomy, optoelectronics, and laser systems. However, precision cutting technology remains challenging. This study optimized picosecond laser processing parameters for 6...

Soda–lime glass has a wide range of applications in the fields of smart electronics, optical components, and precision originals. In order to investigate the effect of processing parameters on picosecond Bessel laser cutting of soda–lime...

Picosecond laser drilling offers high precision and quality, and compared to femtosecond lasers, it also balances processing efficiency, making it widely used across various fields. However, existing drilling processes still face issues such as round...

To optimize the laser drilling process and reduce the processing time, this study investigates picosecond laser trepan drilling on the titanium alloy TC4, analyzing the effects of laser parameters on micro-hole diameter, taper, and roundness. Four in...

Laser shock processing (LSP) is a surface treatment technique used to enhance mechanical properties such as hardness, corrosion resistance, and wear resistance. This study investigates the effects of LSP on a 6061-T6 aluminium alloy using four treatm...

Copper (Cu) removal efficiency is a key parameter in the processing of Cu-based electronic devices. Herein, a nitrogen plasma-assisted picosecond (ps) laser process for Cu removal is presented. Based on the cleaning and activation effect of nitrogen...

Elastomers are used as construction materials in numerous industries, and in particular the biomedical industry, mechatronics, electronics, the automotive industry, and chemical devices. The paper presents the results of tests involving the effects o...

Various material processing techniques have been proposed for fabrication of smart surfaces that can modulate cellular behavior and address specific clinical issues. Among them, laser-based technologies have attracted growing interest due to processi...

The nanohole arrays on the silicon substrate can effectively enhance the light absorption in thin film silicon solar cells. In order to optimize the solar energy absorption, polystyrene microspheres with diameters of 1 μm are used to assist picosecon...

To mitigate the challenges pertaining to coating damage and processing defects arising from the utilization of ultrafast laser drilling for microhole creation in thermal barrier coatings (TBCs), thereby exerting substantial influence on the long-term...

Glass is an alternative solution to polymer for the fabrication of three-dimensional (3D) microfluidic biochips. Femtosecond (fs) lasers are nowadays the most promising tools for transparent glass processing. Specifically, the multiphoton process ind...

Recent advancements in microfluidic technologies have revolutionized their applications, particularly in drug monitoring, continuous biochemical analysis, and real-time physiological assessments. However, the fabrication of microfluidic devices with...

This paper presents a study and comparison of surface effects induced by picosecond and nanosecond laser modification of a Ti6Al4V alloy surface under different ambient conditions: air and argon- and nitrogen-rich atmospheres. Detailed surface charac...

In this experimental study, picosecond laser treatment was performed on a nickel-based superalloy Nimonic 263, aiming to investigate the surface effects induced by irradiation in different atmospheric conditions and, concerning changes in surface com...

In processes using the ultrashort pulsed laser, the phenomenon that the ablation efficiency is reduced due to the increase of the shielding effect of the generated plume is increasingly caused by the use of the high power and high repetition rate. A...

We experimented with two polymer materials with different ultraviolet (UV) wavelength absorption characteristics, which are commonly used in flexible devices, by applying an ultrashort-pulsed laser of a 355-nm UV wavelength for 10 ps. The laser param...

Due to high power and ultrashort pulses, femtosecond lasers excel at (but are not limited to) processing materials whose thicknesses are less than 500 microns. Numerous experiments and theoretical analyses testify to the fact that there are solid gro...

We present our research on the high energy picosecond laser operating at a repetition rate of 1 kHz and the high average power picosecond laser running at 100 kHz based on bulk Nd-doped crystals. With diode-pumped solid state (DPSS) hybrid amplifiers...

In this paper, ultra-fast laser lift-off (LLO) of carbon nanotube (CNT)-integrated polyimide film (PI) was investigated by different laser burst mode and pulse intervals using the two-temperature model. By comparing the temperature field distribution...

Se-doped silicon films were fabricated by femtosecond (fs) laser and picosecond (ps) laser irradiating Si–Se bilayer film-coated silicon. The surface morphology, impurity distribution, crystal phase, and near-infrared photocurrent response of f...

An ytterbium-doped, mode-locking fiber front-end laser, delivering both a femtosecond seed laser and picosecond seed laser, was demonstrated. The fundamental repetition rate of the 1031 nm mode-locked laser was 32.77 MHz, realized with the all-polari...

In this study a prototype sub-picosecond laser was investigated for cutting and scribing of silicon wafers. The Yb:KYW laser used for this investigation, unlike ultrashort systems used previously, generates pulses of 650 fs, i.e., between the pico an...

There has been an increase in demand for the development of lightweight and high-strength materials for applications in the transportation industry. Carbon fiber reinforced polymer (CFRP) is known as one of the most promising materials owing to its h...

This study systematically investigates the influence of laser pulse duration on cutting efficiency, heat-affected-zone (HAZ) formation, and mechanical integrity during carbon fiber-reinforced polymer (CFRP) laser cutting. Three distinct pulse-width l...

In this work, we present the fabrication of thin films/nanostructures of metals and metal oxides using picosecond laser ablation. Two sets of experiments were performed: the depositions were carried out in vacuum and in air at atmospheric pressure. T...

Nonlinear compression, as a newly developed post-processing technique, holds the potential to overcome the limitations of gain media and significantly reduce the pulse width of emitted laser pulses. While most existing research has focused on the com...

In laser processing, due to the short interaction time between an ultrashort pulse laser and silicon, it has been difficult to study the lattice temperature change characteristics of silicon. In this paper, the interaction between a picosecond laser...

Selective laser etching is a promising candidate for the mass production of glass interposers. It comprises two steps: local modification by an ultrashort-pulsed laser and chemical etching of the modified volume. According to previous studies, when a...

Ultrafast laser drilling has been proven to effectively reduce the heat-affected zone (HAZ) of carbon fiber-reinforced polymer (CFRP) composites. However, previous research mainly focused on the effects of picosecond laser parameters on CFRP drilling...

Femtosecond laser pulses have been successfully used for film-free single-cell bioprinting, enabling precise and efficient selection and positioning of individual mammalian cells from a complex cell mixture (based on morphology or fluorescence) onto...

This study focuses on the high-precision microhole machining of 304 stainless steel and explores a backwater-assisted picosecond laser trepanning technique. The laser used is a 30 W green picosecond laser with a wavelength of 532 nm, a repetition rat...

Polyhydroxyalkanoates (PHAs) have emerged as a promising biodegradable and biocompatible material for scaffold manufacturing in the tissue engineering field and food packaging. Surface modification is usually required to improve cell biocompatibility...

22MnB5 hot forming steel is widely used in the automotive industry due to the increasing demand for lightweight vehicles. As surface oxidation and decarburization occur during hot stamping processes, an Al-Si coating is often precoated on surfaces. T...

This study investigated the effects of water-based and underwater assistance methods on the quality of picosecond laser-drilled microholes in silicon nitride ceramics, analyzing the influence of laser power variations in air and aqueous environments...

Self-mode-locked semiconductor disk lasers possess compact resonant cavity and stable construction. These devices have a wide application prospect because of their picosecond to sub-picosecond pulse width, excellent beam quality and tailorable emissi...

Focusing condition such as numerical aperture (N.A.) has a great influence on the creation of molten area and the stable welding process in fusion micro-welding of glass. In this study, a picosecond pulsed laser of 1064 nm in wavelength and 12.5 ps i...

4H-SiC wafers usually require polishing treatment after slicing to improve the surface quality. However, traditional polishing processes have problems such as low removal efficiency and easy surface damage, which affect the reliability of electronic...

Ultrafast laser processing can produce micro/nanostructures, which is of great interest in advanced manufacturing. Ultrafast laser-induced events include non-equilibrium dynamic phenomena, occurring on the femtosecond to picosecond time scale and nan...

The paper presents a study on the surface modifications of nickel based superalloy Nimonic 263 induced by laser shock peening (LSP) process. The process was performed by Nd3+:Yttrium Aluminium Garnet (YAG) picosecond laser using the following paramet...

To optimize the quality of picosecond laser drilling in stainless steel, this study systematically investigates the key influencing factors and optimization strategies of the laser-drilling process through experimental methods. In the experimental se...

Ultrashort pulse laser shows good potential for heat control improvement in metal additive manufacturing. The challenge of applying ultrashort pulse laser as the heat source is to form a fully melted and dense microstructure. In this study, a picosec...

We report on a millijoule-level fiber–solid hybrid hundred-picosecond laser system with a stable performance and compact structure. The laser system is based on a master oscillator power amplifier structure containing an all-fiber master oscill...

Here, we present a simple and green method of preparing Au-Ag bimetallic nanoparticles (NPs) with a tunable surface plasmon resonance (SPR) wavelength by using picosecond laser irradiation. Au-Ag alloy NPs have been produced by irradiating the soluti...

A novel, programmable, mode-locked fiber laser design is presented and numerically demonstrated. The laser programmability is enabled by an intracavity optical phase-only pulse shaper, which utilizes the same linearly chirped fiber Bragg grating (LC-...

We report a study on the process of the formation of bubble-like structures on a coated glass surface using 50 ps laser pulses. The high-intensity interaction of laser radiation on the film–glass interface allowed us to develop a process for ef...

Due to their excellent light transmission, heat resistance, corrosion resistance, high mechanical strength, and other characteristics, transparent materials have been widely used in emerging industries such as aviation, aerospace, microelectronics, i...

Ultrafast lasers, characterized by femtosecond and picosecond pulse durations, have revolutionized material processing due to their high energy density and minimal thermal diffusion, and have played a transformative role in precision manufacturing. T...

Amorphous germanium films on nonrefractory glass substrates were annealed by ultrashort near-infrared (1030 nm, 1.4 ps) and mid-infrared (1500 nm, 70 fs) laser pulses. Crystallization of germanium irradiated at a laser energy density (fluence) range...

In recent years, the demand for highly integrated and lightweight components has been rising sharply, especially in plastics processing. One strategy for weight-saving solutions is the development of conductive tracks and layouts directly on the poly...

Direct laser interference patterning (DLIP) has proven to be a fast and, at the same time, high-resolution process for the fabrication of large-area surface structures. In order to provide structures with adequate quality and defined morphology at th...