Skip to Content

27 Results Found

  • Article
  • Open Access
7 Citations
2,159 Views
17 Pages

29 November 2024

In order to enhance the resistance of superalloys to high-temperature molten chloride salt corrosion, Fe-Al coatings were prepared on 310S and 347H stainless-steel surfaces via pack aluminizing. Then, the coatings were annealed at different temperatu...

(This article belongs to the Special Issue Corrosion Resistance, Mechanical Properties and Characterization of Metallic Materials and Coatings, 2nd Edition)
  • Article
  • Open Access
15 Citations
4,599 Views
10 Pages

Process and High-Temperature Oxidation Resistance of Pack-Aluminized Layers on Cast Iron

  • Xing Wang,
  • Yongzhe Fan,
  • Xue Zhao,
  • An Du and ,
  • Ruina Ma and
  • Xiaoming Cao
  • + 1 author+ 0 author

4 June 2019

Pack aluminizing of spheroidal graphite cast iron with different aluminizing temperature and time was studied. Results showed that the thickness of aluminized layer increased with the increasing temperature and time. The optimized process parameters...

(This article belongs to the Special Issue Advances in Design by Metallic Materials: Synthesis, Characterization, Simulation and Applications)
  • Article
  • Open Access
6 Citations
3,731 Views
11 Pages

The Role of Substrate Surface Roughness on in-Pack Aluminization Kinetics of Ni-Base Superalloy

  • Wojciech J. Nowak,
  • Małgorzata Tomków,
  • Patrycja Wierzba,
  • Kamil Gancarczyk and
  • Bartek Wierzba

The Ni-base superalloys facing high temperature require further protection against high temperature oxidation. One of the most common methods providing high temperature oxidation resistance is the production of aluminide layers (NiAl-coatings). It is...

  • Article
  • Open Access
182 Views
15 Pages

26 October 2026

Low-temperature pack aluminizing offers a promising approach to improving the surface properties of structural steels while limiting thermal damage. However, achieving sufficient coating growth at reduced temperatures remains challenging. Here, room-...

(This article belongs to the Section High-Energy Beam Surface Engineering and Coatings)
  • Article
  • Open Access
1,747 Views
14 Pages

Study on Preparation of Nano-CeO2 Modified Aluminized Coating by Low Temperature Pack Aluminizing on γ-TiAl Intermetallic Compound

  • Jiahui Song,
  • Yunmei Long,
  • Yifan He,
  • Yichen Li and ,
  • Dianqi Huang,
  • Yan Gu,
  • Xingyao Wang,
  • Jinlong Wang and
  • Minghui Chen
  • + 4 authors+ 0 author

5 August 2025

TiAl alloy offers advantages including low density, high specific strength and stiffness, and excellent high-temperature creep resistance. It is widely used in the aerospace, automotive, and chemical sectors, as well as in other fields. However, at t...

(This article belongs to the Special Issue Advances in Corrosion, Oxidation, and/or Wear-Resistant Coatings)
  • Article
  • Open Access
7 Citations
7,595 Views
11 Pages

Aluminizing via Ionic Liquid Electrodeposition and Pack Cementation: A Comparative Study with Inconel 738 and a CoNiCrAlY

  • Luca Tagliaferri,
  • Enrico Berretti,
  • Andrea Giaccherini,
  • Stefano M. Martinuzzi and ,
  • Francesco Bozza,
  • Martin Thoma,
  • Ugo Bardi and
  • Stefano Caporali
  • + 3 authors+ 0 author

A novel aluminizing process based upon room temperature Al-electrodeposition from Ionic Liquids followed by diffusion heat treatment was applied on bare- and CoNiCrAlY-coated Inconel 738 (IN738). The aluminized samples were tested by isothermal oxida...

(This article belongs to the Special Issue Five Years of Coatings: Coatings Science and Technology for the 21st Century)
  • Feature Paper
  • Article
  • Open Access
1 Citations
407 Views
19 Pages

22 August 2026

Fe-Al intermetallic coatings were fabricated on 0Cr21Al6Nb stainless steel by pack cementation to systematically investigate the effects of temperature (650–800 °C) and holding time (2–16 h) on the coating microstructure, phase consti...

(This article belongs to the Topic Advanced Manufacturing and Surface Technology, 2nd Edition)
  • Article
  • Open Access
23 Citations
4,186 Views
16 Pages

Aluminide Diffusion Coatings on IN 718 by Pack Cementation

  • Mihai Ovidiu Cojocaru,
  • Mihai Branzei and
  • Leontin Nicolae Druga

8 August 2022

This paper addressed the issues of both direct and indirect synthesis of Ni aluminides by pack cementation (pure Ni and IN 718 superalloy). On the Al-Ni diffusion twosome under pressure, at temperatures below and above the Al melting temperature, the...

(This article belongs to the Special Issue Surface Processing Technology for High-Temperature Resistant Materials)
  • Article
  • Open Access
3 Citations
2,690 Views
10 Pages

Microstructure and Performance of Al-Coating on AZ31 Prepared by Pack-Cementation with Different Heating Methods

  • Xian Yang,
  • Jing Liao,
  • Jianjun Hu,
  • Xiang Hou and ,
  • Hui Li,
  • Xule Song,
  • Peng Jiang and
  • Ning Guo
  • + 3 authors+ 0 author

7 May 2022

In this study, Al-containing coatings were prepared on the surface of AZ31 magnesium alloy by pack-cementation through box-type furnace heating (BFH) and induction heating (IH) methods. Phases, microstructure, composition, and performance were charac...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Review
  • Open Access
4 Citations
2,559 Views
28 Pages

21 April 2026

In this review, a comprehensive analysis of aluminide coatings for nickel-based superalloys was performed with the particular emphasis on their processing, microstructural evolution, and performance under high-temperature conditions. Nickel-based sup...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
5 Citations
1,952 Views
17 Pages

10 March 2025

This study systematically explores and expands upon the research questions, revealing the scientific principles and engineering value of chromium–aluminum (Cr-Al) co-diffusion coatings in enhancing high-temperature friction performance. This st...

(This article belongs to the Section Corrosion)
  • Article
  • Open Access
1,018 Views
13 Pages

Effect of Surface Aluminizing on the Zinc Corrosion Resistance of Fe-20Cr-5B-3Al Alloy

  • Shanlong Zhu,
  • Ya Liu,
  • Changjun Wu,
  • Xiangying Zhu and
  • Xuping Su

26 May 2025

This study systematically investigates the effect of surface aluminizing treatment on the microstructure of Fe-20Cr-5B-3Al alloy and its corrosion behavior in liquid zinc. Aluminizing treatment was performed using the powder pack method with NH4Cl (5...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
11 Citations
6,229 Views
8 Pages

Isothermal Oxidation of Aluminized Coatings on High-Entropy Alloys

  • Che-Wei Tsai,
  • Kuen-Cheng Sung,
  • Kzauki Kasai and
  • Hideyuki Murakami

20 October 2016

The isothermal oxidation resistance of Al0.2Co1.5CrFeNi1.5Ti0.3 high-entropy alloy is analyzed and the microstructural evolution of the oxide layer is studied. The limited aluminum, about 3.6 at %, leads to the non-continuous alumina. The present all...

(This article belongs to the Special Issue High-Entropy Alloys and High-Entropy-Related Materials)
  • Article
  • Open Access
6 Citations
3,939 Views
15 Pages

13 June 2022

The nickel aluminides are commonly employed as a bond coat material in thermal barrier coating systems for the components of aeroengines operated at very high temperatures. However, their lifetime is limited due to several factors, such as outward di...

(This article belongs to the Topic Materials and Surface Treatment Processes Used for Engineering Applications)
  • Article
  • Open Access
12 Citations
5,722 Views
8 Pages

Composition Distribution and Electrochemical Behavior of an Ni2Al3 Coating on Q235 Steel

  • Ningning Li,
  • Minzhi Wang,
  • Gong Zheng,
  • Yongsheng Li and
  • Guang Chen

11 March 2016

An Ni2Al3 coating was prepared via the electrodeposition of nickel followed by pack aluminization. Polarization curve and electrochemical impedance spectroscopy were performed to study the room temperature corrosion behavior of the coating in a 3.5 w...

(This article belongs to the Special Issue Oxidation of Metals)
  • Article
  • Open Access
7 Citations
6,269 Views
11 Pages

7 December 2017

A 0.5 μm thick layer of rhodium was deposited on the CMSX 4 superalloy by the electroplating method. The rhodium-coated superalloy was hafnized and aluminized or only aluminized using the Chemical vapour deposition method. A comparison was made of th...

  • Article
  • Open Access
1 Citations
926 Views
20 Pages

Microstructure and Tribological Properties of Fe40Mn19Cr20Ni20Mo1 High-Entropy Alloy Composite-Infiltrated by Aluminum–Nitrogen

  • Zelin Huang,
  • Xiangrong Zhang,
  • Huijun Yang,
  • Xi Jin and ,
  • Min Zhang and
  • Junwei Qiao
  • + 1 author+ 0 author

21 November 2025

In the manufacturing sector, energy loss often stems mainly from wear. By improving the surface characteristics of alloys, we can substantially cut down on this kind of loss, which in turn boosts the efficiency of energy use. In this study, Fe40Mn19C...

  • Feature Paper
  • Article
  • Open Access
7 Citations
6,320 Views
12 Pages

20 March 2018

One of the major barriers limiting the suitability of TiAl intermetallic alloys for use in the demanding aircraft and automotive industries is their susceptibility to degradation as a result of oxidation at temperatures exceeding 760 °C. Paper presen...

(This article belongs to the Special Issue Durability and Degradation of Protective Coatings—Theoretical Approach and/vs Industrial Practice)
  • Article
  • Open Access
24 Citations
4,706 Views
19 Pages

Scale Formation and Degradation of Diffusion Coatings Deposited on 9% Cr Steel in Molten Solar Salt

  • Ceyhun Oskay,
  • Tobias M. Meißner,
  • Carmen Dobler,
  • Benjamin Grégoire and
  • Mathias C. Galetz

22 October 2019

The employment of ferritic-martensitic steels e.g., P91, as structural materials in concentrated solar power (CSP) plants can significantly increase cost-efficiency. However, their application is strongly restricted by their lower corrosion resistanc...

(This article belongs to the Special Issue Surfaces and Interfaces for Renewable Energy)
  • Article
  • Open Access
4 Citations
3,223 Views
12 Pages

Microstructure and Nanoindentation Evolution of (Ni,Pt)Al Coating on IC21 Substrate at 1100 °C

  • Yingkun Liu,
  • Yun Ye,
  • Bin Yin,
  • Chunming Deng and ,
  • Min Liu and
  • Chaoqun Wu
  • + 1 author+ 0 author

In this study, a ~20 μm (Ni,Pt)Al coating was applied to an IC21 substrate via electroplating followed by aluminizing. A thermal exposure test at 1100 °C in air was used to investigate the microstructure evolution and nanoindentation behavior...

(This article belongs to the Special Issue Trends and Advances in Anti-wear Materials)
  • Review
  • Open Access
51 Citations
6,682 Views
15 Pages

Thermal barrier coatings (TBCs) are widely used to improve the oxidation resistance and high-temperature performance of nickel-based superalloys operating in aggressive environments. Among the TBCs, aluminide coatings (ACs) are commonly utilized to p...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Review
  • Open Access
9 Citations
3,741 Views
39 Pages

Catalytic Combustion of Fugitive Methane: Challenges and Current State of the Technology

  • Robert E. Hayes,
  • Joanna Profic-Paczkowska,
  • Roman Jędrzejczyk and
  • Joseph P. Mmbaga

21 September 2025

This review covers the current state, challenges, and future directions of catalytic combustion technologies for mitigating fugitive methane emissions from the fossil fuel industry. Methane, a potent greenhouse gas, is released from diverse sources,...

(This article belongs to the Special Issue Applied Research in Combustion Technology and Heat Transfer)
  • Article
  • Open Access
23 Citations
4,760 Views
13 Pages

Microstructural Characterization of Fibric Peat Stabilized with Portland Cement and Silica Fume

  • Afnan Ahmad,
  • Muslich Hartadi Sutanto,
  • Niraku Rosmawati Ahmad,
  • Mazizah Ezdiani Mohamad and
  • Mastura Bujang

20 December 2022

Peat is a renowned problematic soil and needs stabilization to enhance its engineering properties. Silica fume (SF) and Ordinary Portland Cement (OPC) were extensively adopted to increase the mechanical properties of peat; however, their microstructu...

  • Article
  • Open Access
3 Citations
2,567 Views
21 Pages

The separation of oxygen from air by means of inorganic ceramic membranes requires gas-tight ceramic–metal joints that enable reliable permeation operation in the oxygen partial pressure gradient at 850 °C. Reactive air brazing is a promisi...

(This article belongs to the Special Issue Zeolitic Membranes for Gas and Liquid Separation: Synthesis and Applications)
  • Article
  • Open Access
2 Citations
690 Views
30 Pages

31 March 2026

This study provides new experimental evidence indicating that powdered mineral wool waste traditionally classified as a non-reactive, non-recyclable insulation residue can function as a genuinely pozzolanic supplementary cementitious material when in...

(This article belongs to the Special Issue Integrated Approaches to Sustainable Municipal Solid Waste Management: Challenges, Innovations, and Resource Recovery)
  • Article
  • Open Access
2 Citations
1,827 Views
17 Pages

Formation of Protective Coatings on TZM Molybdenum Alloy by Complex Aluminosiliconizing and Application of a Preceramic Layer

  • Tetiana Loskutova,
  • Volodymyr Taran,
  • Manja Krüger,
  • Nadiia Kharchenko and ,
  • Myroslav Karpets,
  • Yaroslav Stelmakh,
  • Georg Hasemann and
  • Michael Scheffler
  • + 3 authors+ 0 author

5 October 2025

The use of molybdenum-based alloys as materials for components operating under high temperatures and significant mechanical loads is widely recognized due to their excellent mechanical properties. However, their low high-temperature resistance remain...

(This article belongs to the Special Issue Advanced Ceramic Materials and Coatings: Synthesis, Properties and Applications)
  • Article
  • Open Access
16 Citations
4,234 Views
19 Pages

Influence of Alumina and Silica Supports on the Performance of Nickel Catalysts for Methane Partial Oxidation

  • Rasha S. A. Alanazi,
  • Salwa B. Alreshaidan,
  • Ahmed A. Ibrahim,
  • Irfan Wazeer and ,
  • Naif Alarifi,
  • Omer A. Bellahwel,
  • Ahmed E. Abasaeed and
  • Ahmed S. Al-Fatesh
  • + 3 authors+ 0 author

22 January 2025

Rising greenhouse gas concentrations are causing climatic change that threatens ecosystem sustainability. This study investigated the impact of silica incorporation into alumina-supported nickel catalysts for the partial oxidation of methane (POM), a...

(This article belongs to the Section Industrial Catalysis)