In the CO2 differential absorption lidar (DIAL) system, signals are simultaneously collected through analog detection (AD) and photon counting (PC). These two kinds of signals have their own characteristics. Therefore, a combination of AD and PC sign...
The presence of fiber optic devices, such as couplers or wavelength division multiplexers, based on hollow-core fibers (HCFs) is still rather uncommon, while such devices can be imagined to greatly increase the potential of HCFs for different applica...
Owing to its controllable tolerance, simple operation and no need for welding at construction site, the composite system involving grouted cement material, steel material and ductile iron material is widely used as grouted splice sleeve (GSS) connect...
In this paper, 3D finite element simulations were conducted for lap-spliced ultra-high-performance concrete (UHPC) beams using ABAQUS software. Based on the concrete damaged plasticity (CDP) model, the plastic damage factor was introduced to simulate...
This study investigated the grouted sleeve splices and corrugated duct splices between shear walls and footing. In this regard, three shear walls were experimentally tested. One wall was cast monolithically with the foundation (RCWS), whereas two wal...
The issue of the cut-off splicing of an additional fiber-reinforced polymer (FRP) bar in the near-surface mounted (NSM) technique for reinforced concrete (RC) beam strengthening exposed dominantly to bending is insufficiently investigated. A possible...
In a previous work, the fatigue behaviour of different hot riveted joints under fatigue loadings were experimentally calculated. In particular, the experimental data showed a Wöhler curve slope close to five against the slope of three proposed b...
With advantages in efficiency and sustainability, assembly splicing technology promotes construction industry upgrading. However, research on the seismic response of assembly splicing subway stations (ASS) is particularly scarce. This work studies th...
For the omnidirectional measurement, the collected images of large-angle fisheye lens need to be corrected and spliced before next procedure, which is complicated and inaccurate. In this paper, a direct position measurement method based on fisheye im...
The use of column-tree connections is common in controlled shop environments due to their cost-effectiveness in achieving ductile welds. Field bolts are also easy to install and inspect. However, there is currently no prequalification available for t...
Hollow-core optical fibers (HCFs) have unique properties like low latency, negligible optical nonlinearity, wide low-loss spectrum, up to 2100 nm, the ability to carry high power, and potentially lower loss then solid-core single-mode fibers (SMFs)....
Several members of the Hes/Her family, conserved targets of the Notch signalling pathway, encode transcriptional repressors that dimerise, bind DNA and self-repress. Such autoinhibition of transcription can yield homeostasis and, in the presence of d...
This study investigates the strain development in reinforcing bars within the plastic hinge regions of beams and columns, with the main objective of modifying the current acceptance criteria for mechanical bar splices to accommodate high-strength rei...
The mortise-and-tenon joint prefabricated connection combines the assembly form of mortise-and-tenon joints and cast-in-place wet joints. It achieves reliable joint connections through small joint depths and lap-spliced reinforcement lengths. To stud...
An interference filter is designed by fusing a segment of multi-core fiber (MCF) between two segments of multimode fibers (MMFs), which is then spliced between two segments of single mode fibers (SMFs). The light is split into the cladding and differ...
There are many studies that model the within-host population dynamics of Human Immunodeficiency Virus Type 1 (HIV-1) infection. However, the within-infected-cell replication of HIV-1 remains to be not comprehensively addressed. There exist rather few...
With the continuous improvement of the prefabricated modular technology system, the prefabricated subway station structures are widely used in underground engineering projects. However, prefabricated subway stations in soft soil can suffer significan...
Fiber lasers around 2 µm band have attractive applications, such as coherent detecting, material processing, pump source for mid-IR lasers based on nonlinear frequency shift, etc. Fiber gas Raman lasers (FGRLs) based on the stimulated Raman sca...
Cerium-doped-silica glasses are widely used as ionizing radiation sensing materials. However, their response needs to be characterized as a function of measurement temperature for application in various environments, such as in vivo dosimetry, space...
In this paper, we propose an aerial images stitching method based on an as-projective-as-possible (APAP) algorithm, aiming at the problem artifacts, distortions, or stitching failure due to fewer feature points for multispectral aerial image with cer...
Societal transformation is one of the most topical concepts in sustainability research and policy-making. Used in many ways, it indicates that nonlinear systematic changes are needed in order to fully address global environmental and human developmen...
Spermatozoa (SPZ) are motile cells, characterized by a cargo of epigenetic information including histone post-translational modifications (histone PTMs) and non-coding RNAs. Specific histone PTMs are present in developing germ cells, with a key role...
Ultra-wideband (UWB) nonlinear frequency modulation (NLFM) waveforms have the advantages of low sidelobes and high resolution. By extending the frequency domain wideband synthesis method to the NLFM waveform, the synthetic bandwidth will be limited,...
Open systems can only exist by self-organization as pulsing structures exchanging matter and energy with the outer world. This review is an attempt to reveal the organizational principles of the heterochromatin supra-intra-chromosomal network in term...
By combining the broad learning and a convolutional neural network (CNN), a block-diagonal constrained multi-stage convolutional broad learning (MSCBL-BD) method is proposed for hyperspectral image (HSI) classification. Firstly, as the linear sparse...
Structures are susceptible to external impacts over the long term, resulting in various types of damage. An online, accurate assessment of the severity of damage is the basis for formulating subsequent maintenance and reinforcement plans. In this wor...
This paper presents a nonlinear finite element analysis (FEA) of textiles reinforced mortars (TRM)-confined reinforced concrete (RC) columns through jacketing, under combined axial and cyclic loadings. The FEA models were validated with an experiment...