Composite electrochemical coatings (CECs) based on nickel-chromium alloy and modified with multilayer graphene oxide (GO) were obtained. The electrodeposition process of these coatings was studied in the potentiodynamic mode. The structure and the co...
This paper examines a microconstruction consisting of nickel (Ni)/chromium (Cr) alloy thin-film. The total length of the microconstruction was 28 mm, the width was 0.2 mm, and the height was designed to be 1 μm. A thin-film of Ni/Cr alloy was co-sput...
Machining chromium–nickel alloy steel is challenging due to its material properties, such as high strength and toughness. These properties often lead to tool damage and degradation of tool life, which overall impacts the production time, cost,...
This study examines the formation of hard layers containing Ni-B and Cr-B on the surface of 80/20 nickel–chromium alloy. The work evaluates the mechanical properties of the boride layers using instrumented nanoindentation. In addition, the grow...
Welded cable composed of nickel–chromium (Ni-Cr) alloy and copper is a crucial component in the resistance heating technology used for heavy oil production. Tungsten inert gas (TIG) welding was employed to join the copper and Ni-Cr alloy using...
This paper describes the principles of obtaining wear-resistant coatings based on titanium diboride that are deposited on the cutting tool for use in the machining of chromium–nickel alloys. The spark plasma sintering of samples from the TiB2/T...
This study compared the microstructures and mechanical properties of nickel–chromium–molybdenum (Ni–Cr–Mo) alloys prepared from a single alloy with an identical composition using two new digital processes (selective laser melting (SLM) and soft metal...
Copper–nickel alloys are widely applied in marine engineering due to their excellent mechanical properties and corrosion resistance. This study investigates the effect of chromium (Cr) on the erosion–corrosion behavior of copper–nic...
In the field of petroleum extraction, the welding technology of the core wire (the hybrid structure of copper and the Ni-Cr alloy) in high-power oilfield heaters is a key process that determines the efficiency of the heater. Using the tungsten inert...
The aim of this study was to evaluate the wear properties of resin teeth with different opposing dental restorative materials. One type of resin tooth (Trubyte Biotone) was tested against six types of restorative materials including type III gold all...
This article discusses the specific application features of end mills with Ti-TiN-(Ti,Cr,Al)N, Zr-ZrN-(Zr,Mo,Al)N, and ZrHf-(Zr,Hf)N-(Zr,Hf,Cr,Mo,Al)N multilayer nanocomposite coatings during the machining of the Inconel 718 nickel–chromium all...
The precipitates and the intergranular corrosion behavior of a UNS N08028 nickel–iron–chromium alloy sensitized at different temperatures were studied by employing transmission electron microscopy, Kelvin probe force microscopy and other...
The principal objective of this project was to investigate the rheological properties of Fe–C–Cr and Fe–C–Ni-based low-alloy steels using an Anton Paar high-temperature rotational viscometer up to 1550 °C. The emphasis was...
Interest in surface integrity has grown in the manufacturing industry; indeed, it has become an integral part of the industry. It can be studied by examining surface roughness parameters, hardness variations, and microstructure. However, evaluating a...
Three alloys based on nickel, rich in chromium due to their oxidation resistance at high temperature and containing ZrC carbides for their mechanical reinforcing against creep, were elaborated by foundry. After control of their as-cast microstructure...
The paper proposes an innovative method of using microheaters for research on cells in vitro. A method of local heating of a single culture well, compatible with an Electric Cell-substrate Impedance (ECIS) system is presented. A microheater and cultu...
The plasma paste boriding process was used for production of the borided layers on pure nickel and nickel-chromium alloys. The produced layers consisted of nickel borides only (in the case of nickel) or a nickel and chromium borides mixture (in the c...
Composite coatings based on chromium carbide (Cr3C2) and nickel–chromium alloys (NiCr) are widely used due to their unique properties, including high heat resistance, wear resistance and corrosion resistance. This article studies the structural...
Chromium- and cobalt-based alloys, as well as chrome–nickel steels, are most used in dental prosthetics. Unfortunately, these alloys, especially nickel-based alloys, can cause allergic reactions. A disadvantage of these alloys is also insuffici...
Although dental implants appear to be an alternative for treatment of tooth loss, fixed prosthetic restorations are an irreplaceable part of oral rehabilitation. Regarding the EU directives concerning cobalt health risks, titanium alloys may be an al...
This work discusses on influence of niobium or molybdenum addition on microstructure and tensile properties of NiCr-based dental alloys. In this regard, the Ni-24Cr-8Nb, Ni-22Cr-10Nb and Ni-20Cr-12Nb (wt. %) alloys produced by arc melting process. To...
This work presents the improvement of hardfacing welding for American Society for Testing and Materials (ASTM) A572-based high-strength, low-alloy steel by controlling the heating/cooling conditions of welding process. In the welding process, the buf...
Studies of storage and production of hydrogen, which is an alternative to fossil fuels, have been intensified. Hydrogen production from metal borohydrides via catalyst is very attractive because of its advantages, such as controlled production, high...
A Ni-Cr alloyed layer was prepared on the surface of Q235 steel using double-glow plasma surface alloying (DGPSA) technology and the alloyed layer was cold-rolled with different deformation rates. The microstructure, composition distribution and phas...
This paper discusses the results of a study focused on the nature of the interaction of Me-MeN-(Me,Mo,Al)N coatings (where Me = zirconium (Zr), titanium (Ti), or chromium (Cr)) with a contact medium based on the Ni-Cr system. The studies were carried...
This study investigates the cytotoxicity of various orthodontic archwires, which are essential in directing tooth movement through biomechanical forces. With advancements in material science, different archwire materials have been developed to balanc...
The aim of this work was to develop a new coating material based on Ni20Cr alloy modified with up to 50%wt. rhenium. The modification was carried out by the mechanical mixing of the base powder and ammonium perrhenate with the subsequent thermoreduct...
The presence and development of pathogens in the human body remains a serious problem. The existence of microorganisms is primarily related to their ability to adhere to various surfaces. The aim of this study was to evaluate the ability of Si(C,N) c...
This paper presents the results of measurements of the spall strength and elastic-plastic proper-ties, under dynamic and static loads, of the high-strength heat-resistant nickel-chromium alloy Inconel 625, obtained by the direct laser deposition meth...
Laser surface treatment on two different types of nickel–chromium white cast iron (Ni-hard) alloys (Ni-hard 1 and Ni-hard 4) was investigated. Nd:YAG laser of 2.2-kw with continuous wave was used. Ni-hard alloys are promising engineering materi...
The hemodynamic activity of Melipona flavolineata workers was evaluated during restraint stress for a period of 30 min. The observed parameters were power variation in the elapsed time, and subsequently, six periods of one second were divided and cal...
The behavior of low-carbon steels (LCSs), a high-strength steel and a nickel–chromium alloy in HCl solutions in the presence of N-containing organic substances has been studied. N-containing organic substances that comprise 1,2,4-triazole in th...
Despite the advent of metal-free solutions, porcelain-fused-to-metal restorations (PFM) are still widely used. Particularly for the latest ceramic systems, scarce information is present in the scientific literature about the ideal opaque layer thickn...
This paper focused on determining the increased tendency of cracking after the die forging process of high nickel and chromium steel. The increase in carbon content in austenitic nickel–chromium steel promoted the tendency of valve forgings to...
In modern aviation production, innovative hard-to-machine materials with unique physical and mechanical properties are being used increasingly. When processing such materials, the weakest link in the technological chain of production is the metal-cut...
The paper presents the results of investigation of the 0.4C-35Cr-45Ni-Nb alloy, which operated in the cracked hydrocarbon feeds and dilution steam at 1125 °C. The material originated from the pyrolytic furnace coil tubes, of which internal walls were...
Exposure tests were performed on low alloy steels in high Cl− and high SOx environment, and the structure of the rust were analyzed by TEM (Transmission Electron Microscopy) and Raman Spectroscopy. In the exposure test site, the concentrations of Cl−...
Nickel-based alloys that contain chromium are widely used in corrosion-resistant applications in industry, but they are sensitive to the environment when the passive chromium oxide layer is damaged. In Ni600 and Ni625 alloys, precipitates can deplete...
This article presents the results of laboratory studies on the smelting of nickel–chromium-containing ferroalloys from low-grade nickel ores from Kazakhstan. X-ray phase analysis was performed on raw materials, which included quartz, nontronite...
Legislative framework addresses the issues of alloy corrosion, demanding the restricted use of probable carcinogenic, mutagenic, and toxic-for-human-reproduction (CMG) metals like nickel, cobalt, and chromium and demanding the development of new biom...
High-strength nickel–chromium steel (20Cr2Ni4A) is typically used in bearing applications. Alternating magnetic field treatment, which is based on the use of a magnetiser, and which is fast and cost-effective in comparison to conventional proce...
There is an increased interest in the use of the deep eutectic solvents (DESs) as electrolytic media for electrochemical synthesis of conducting polymers, which could influence their characteristics. Moreover, the polypyrrole layers represent an attr...
The aim of this study is the fabrication of unprecedented neuroelectrodes, replete with exceptional biological and electrical attributes. Commencing with the synthesis of polyethylene glycol and polyethyleneimine-modified iron oxide nanoparticles, th...
This research aimed at an increase in wear resistance of round cutting plates manufactured with SiAlON dielectric ceramics through deposition of wear-resistant coatings. To increase effectiveness of the coatings, their adhesion was improved by the re...
Background/Objectives: Dental malocclusions are often treated with appliances made of metal alloys. These alloys biodegrade in oral cavity and release toxic metals such as nickel and chromium. This study aimed to assess nickel and chromium content in...
Objective: This study aims to evaluate cell proliferation capacity and micronuclei incidence in the presence of nickel–chromium (Ni-Cr)-based dental alloys, with and without the addition of beryllium (Be). The use of these alloys in dental pros...
Compositions of stainless steel, nickel-titanium, cobalt-chromium and β-titanium orthodontic alloys were simulated with mixtures of Fe, Ni, Cr, Co, Ti and Mo metal ions as potential oxidative stress-triggering agents. Wild-type yeast Saccharomyc...
This study presents the results of laboratory experiments on the processing of lateritic nickel ores mixed with coal and CaO, followed by the use of the obtained product for the smelting of nickel-containing ferroalloy by the metallothermic method. T...
This article discusses the development of a technology for producing nickel- and chromium-containing ferroalloy through the carbothermic reduction of low-grade ores from the Batamsha deposit. Thermodynamic modeling of phase formation was carried out...
DLC coatings have low adhesive bond strength with the substrate and a high level of residual stresses. This paper is devoted to researching a complex of characteristics of a DLC-Si coating deposited on samples of SiAlON ceramics with intermediate coa...
of 4