Skip to Content

26 Results Found

  • Article
  • Open Access
6 Citations
3,437 Views
20 Pages

Hole Morphology and Keyhole Evolution during Single Pulse Laser Drilling on Polyether-Ether-Ketone (PEEK)

  • Yanmei Zhang,
  • Gang Yu,
  • Chongxin Tian,
  • Zhiyong Li and ,
  • Jiayun Shao,
  • Shaoxia Li and
  • Xiuli He
  • + 2 authors+ 0 author

26 March 2022

Polyether-ether-ketone (PEEK), with its superior mechanical, chemical, and thermal properties, as well as high biocompatibility, has been used in aerospace, electronics, and biomedical applications. In this paper, a large number of experiments of sin...

(This article belongs to the Special Issue Assessment of Metallurgical and Mechanical Properties of Welded Joints via Numerical Simulation and Experiments)
  • Article
  • Open Access
4 Citations
2,443 Views
19 Pages

Study on the Depth and Evolution of Keyholes in Plasma-MIG Hybrid Welding

  • Xinglin Miao,
  • Hongtao Zhang,
  • Wenhuan Cao,
  • Zhenyu He and ,
  • Bo Wang,
  • Fuchen Ge and
  • Jianguo Gao
  • + 2 authors+ 0 author

27 February 2023

Keyholes are very important to the Plasma-MIG hybrid welding process, weld formation, and quality. With the purpose of studying the effect of the main welding parameters (plasma current, MIG current, magnetic field intensity, and welding velocity) on...

(This article belongs to the Special Issue Physical Mechanism of Welding of Metallic Materials)
  • Article
  • Open Access
1 Citations
1,150 Views
21 Pages

17 September 2025

The keyhole defect located at the termination of the friction stir welding (FSW) seam of 6082 aluminum alloys was repaired utilizing the refilling friction stir spot technique. This study examined the impact of the plunge depths on the microstructure...

(This article belongs to the Special Issue Advances in Welding and Joining of Alloys and Steel)
  • Article
  • Open Access
33 Citations
7,905 Views
21 Pages

Characterization of Vapor Capillary Geometry in Laser Beam Welding of Copper with 515 nm and 1030 nm Laser Beam Sources by Means of In Situ Synchrotron X-ray Imaging

  • Florian Kaufmann,
  • Carola Forster,
  • Marc Hummel,
  • Alexander Olowinsky and ,
  • Felix Beckmann,
  • Julian Moosmann,
  • Stephan Roth and
  • Michael Schmidt
  • + 3 authors+ 0 author

9 January 2023

Laser welding of copper is being used with increasing demand for contacting applications in electric components such as batteries, power electronics, and electric drives. With its local, non-contact energy input and high automation capability enablin...

(This article belongs to the Special Issue New Technology of Welding/Joining of Metallic Materials)
  • Article
  • Open Access
19 Citations
5,758 Views
15 Pages

14 July 2022

The quality of a laser deep penetration welding joint is closely related to porosity. However, the keyhole stability seriously affects the formation of porosity during the laser welding process. In this paper, a three-dimensional laser welding model...

(This article belongs to the Section Additive Manufacturing)
  • Article
  • Open Access
3 Citations
4,278 Views
14 Pages

2 February 2021

The acoustic radiation force driving the plasma jet and the ultrasound reflection at the plasma arc-weld pool interface are considered to modify the formulas of gas shear stress and plasma arc pressure on the anode surface in ultrasonic-assisted plas...

  • Article
  • Open Access
10 Citations
3,644 Views
17 Pages

23 September 2021

Hybrid laser arc welding (HLAW) features advantages such as higher welding speed and gap tolerance as well as smaller welding deformation and heat-affected zone than arc welding. Porosity in hybrid laser arc weld due to keyhole fluctuation tends to b...

(This article belongs to the Special Issue Laser Welding Technology)
  • Article
  • Open Access
518 Views
14 Pages

25 May 2026

This study proposes a novel dynamic composite heat source combining discrete tracking and vapor heating, which can precisely capture the transient energy deposition at the keyhole wall, and further discusses the formation mechanism of weld defects by...

(This article belongs to the Special Issue Advances in Al/Mg/Cu Alloys and Their Composites: Welding, Additive Manufacturing, Heterogeneous Microstructures, and Mechanical Properties—Second Edition)
  • Article
  • Open Access
32 Citations
7,578 Views
15 Pages

11 June 2018

A three-dimensional multiphysical transient model was developed to investigate keyhole formation, weld pool dynamics, and mass transfer in laser welding of dissimilar materials. The coupling of heat transfer, fluid flow, keyhole free surface evolutio...

(This article belongs to the Special Issue Laser Welding)
  • Article
  • Open Access
380 Views
19 Pages

Plasma Characteristics in Underwater Laser Welding via In Situ Observation and Optical Emission Spectroscopy

  • Chengyong Ma,
  • Jie Su,
  • Yang Yang,
  • Qiren Zhao and ,
  • Qing Guo,
  • Manpeng Wu and
  • Zhen Luo
  • + 2 authors+ 0 author

9 September 2026

During underwater laser welding, the coupling among water cooling, gas–liquid interface disturbances, and metal-vapor recoil pressure means that the relationships among plasma evolution, the thermal state of the keyhole, and spatter behavior re...

(This article belongs to the Special Issue Research Progress of Laser Welding Technology of Metals and Alloys)
  • Feature Paper
  • Article
  • Open Access
23 Citations
6,696 Views
16 Pages

Observation of Vapor Plume Behavior and Process Stability at Single-Track and Multi-Track Levels in Laser Powder Bed Fusion Regime

  • Hang Zheng,
  • You Wang,
  • Yinkai Xie,
  • Shengkun Yang and ,
  • Rui Hou,
  • Yulong Ge,
  • Lihui Lang,
  • Shuili Gong and
  • Huaixue Li
  • + 4 authors+ 0 author

9 June 2021

Laser powder bed fusion (LPBF) is a promising additive manufacturing technology for producing metal parts with complex geometric features. However, the issue concerning process stability and repeatability still hinders its future acceptance by the in...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
21 Citations
4,896 Views
27 Pages

30 September 2022

The grain structure of the selective laser melting additive manufactured parts has been shown to be heterogeneous and spatially non-uniform compared to the traditional manufacturing process. However, the complex formation mechanism of these unique gr...

(This article belongs to the Special Issue Experimental Research and Numerical Simulations of Metal Additive Manufacturing)
  • Article
  • Open Access
1 Citations
697 Views
19 Pages

Melt-Pool Dynamics Quantification in LPBF via Move Contrast X-Ray Imaging

  • Zenghao Song,
  • Chengcong Ma,
  • Yuelu Chen,
  • Ke Li and ,
  • Feixiang Wang and
  • Tiqiao Xiao
  • + 1 author+ 0 author

30 April 2026

The dynamic behavior within the melt pool governs the final quality of components fabricated by laser powder bed fusion (LPBF). To address key technical challenges—rapid keyhole evolution, low absorption contrast from metal vapor, and difficult...

  • Article
  • Open Access
5 Citations
3,315 Views
16 Pages

23 September 2020

The energy evolution, fatigue life and failure behaviour of dissimilar Al/steel keyhole-free Friction stir spot welding (FSSW) joints were studied under different fatigue loads. The absorption energy of fatigue fracture, the fracture mechanism and th...

(This article belongs to the Section Advanced Materials Characterization)
  • Review
  • Open Access
3 Citations
2,764 Views
30 Pages

Melt Pool Imaging in Metal Additive Manufacturing Processing

  • Andrei C. Popescu,
  • Sabin Mihai,
  • Petru Vlad Toma,
  • Alexandru-Ionuț Bunea and ,
  • Andrei-Cosmin Rusu,
  • Sînziana Andreea Anghel and
  • Ion Nicolae Mihailescu
  • + 2 authors+ 0 author

8 April 2026

Additive manufacturing has recently become a key enabling technology in industrial fields, ranging from customized products for everyday usage to aerospace applications and small-batch industrial tooling. The future prospects extend up to the biofabr...

(This article belongs to the Special Issue Application-Driven Development of Metal Additive Manufacturing: From Laboratory Research Towards Industrial Adoption)
  • Article
  • Open Access
9 Citations
2,533 Views
13 Pages

Microstructural Inhomogeneity in the Fusion Zone of Laser Welds

  • Libo Wang,
  • Xiuquan Ma,
  • Gaoyang Mi,
  • Lei Su and
  • Zhengwu Zhu

6 November 2023

This paper investigated evolutions of α-Al sub-grains’ morphology and crystalline orientation in the fusion zone during laser welding of 2A12 aluminum alloys. Based on this, a new method for assessing the weldability of materials was prop...

(This article belongs to the Special Issue Advanced Materials – Microstructure, Manufacturing and Analysis)
  • Article
  • Open Access
20 Citations
4,312 Views
25 Pages

Local Microstructure and Texture Development during Friction Stir Spot of 5182 Aluminum Alloy

  • Thierry Baudin,
  • Sandrine Bozzi,
  • François Brisset and
  • Hiba Azzeddine

21 March 2023

The local microstructure, texture gradient and mechanical properties through the shoulder dimension (10 mm) of upper and lower AA5182 aluminum sheets were investigated using electron backscatter diffraction (EBSD) and Vickers microhardness after fric...

(This article belongs to the Special Issue Crystal Plasticity (Volume III))
  • Article
  • Open Access
17 Citations
3,207 Views
14 Pages

13 April 2022

Selective laser melting is a typical powder-bed additive manufacturing technology, for which it is difficult and expensive to observe and measure the molten pool due to its short lifetime and tiny size. This paper introduced a two-stage mesoscopic la...

  • Article
  • Open Access
3 Citations
2,529 Views
12 Pages

5 February 2023

The field of additive manufacturing (AM) of various materials is rapidly developing. At the stage of designing and growing products and for the quality control of finished parts, non-destructive methods of analysis, in particular X-ray computed tomog...

  • Article
  • Open Access
26 Citations
4,947 Views
13 Pages

21 August 2021

In this paper, 8 mm thickness 2205 duplex stainless steel (DSS) plates were successfully welded using keyhole tungsten inert gas welding (K-TIG) welding, and numerical simulations were performed applying the finite element method. Three models of com...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Review
  • Open Access
4 Citations
755 Views
57 Pages

Research Progress on Additively Manufactured Porous Structures of Nickel-Based Superalloys

  • Shenghang Xu,
  • Yiye Pan,
  • Nanxuan Mei,
  • Shaoqi Jia and ,
  • Minghao Huang,
  • Chao Ding,
  • Xin Yang,
  • Jinglong Li,
  • Rong Wang and
  • Huiping Tang
  • + 5 authors+ 0 author

20 May 2026

Nickel-based superalloys are key materials for aerospace and gas turbine applications. Traditional manufacturing approaches struggle to produce controllable porous structures with complex topologies. This review focuses on additively manufactured por...

(This article belongs to the Special Issue 3D Printing Technology Using Metal Materials and Its Applications)
  • Feature Paper
  • Article
  • Open Access
36 Citations
8,379 Views
12 Pages

Effects of Process Parameters and Heat Treatment on Microstructure and Mechanical Characteristics of Laser Powder Bed Fusion Alloy Inconel 718

  • Hongbing Liu,
  • Wenhao Cheng,
  • Yiming Sun,
  • Rui Ma and ,
  • Yajun Wang,
  • Jie Bai,
  • Linan Xue,
  • Xiaoguo Song and
  • Caiwang Tan
  • + 4 authors+ 0 author

15 January 2023

A laser powder bed fusion (LPBF) Inconel 718 (IN718) alloy was fabricated under different process parameters, and the samples with optimal process parameters were treated by subsequent heat treatment. The outcomes demonstrated that the pores’ s...

(This article belongs to the Special Issue Recent Developments in Advanced Manufacturing Technology)
  • Article
  • Open Access
500 Views
25 Pages

Defects such as lack-of-fusion pores, keyhole pores, and thermal cracks are inherent to additively manufactured (AM) components and significantly degrade their mechanical performance, yet their quantitative influence on the strength of AM structures...

  • Article
  • Open Access
33 Citations
7,448 Views
22 Pages

Formation Mechanisms for Entry and Exit Defects in Bobbin Friction Stir Welding

  • Abbas Tamadon,
  • Dirk J. Pons,
  • Kamil Sued and
  • Don Clucas

5 January 2018

Bobbin friction stir welding (BFSW) is an innovative variant for the solid state welding process whereby a rotating symmetrical tool causes a fully penetrated bond. Despite the process development, there are still unknown variables in the characteriz...

(This article belongs to the Special Issue Recent Achievements in Rotary, Linear and Friction Stir Welding of Metals Alloys)
  • Article
  • Open Access
11 Citations
4,781 Views
22 Pages

16 November 2022

Earth observation (EO) data can provide large scale, high-resolution, and transferable methodologies to quantify the sprawl and vertical development of cities and are required to inform disaster risk reduction strategies for current and future popula...

(This article belongs to the Special Issue Optical Remote Sensing Applications in Urban Areas II)
  • Article
  • Open Access
3 Citations
1,976 Views
24 Pages

On the Process Optimization, Microstructure Characterization and Mechanical Performance of Ti65 Titanium Alloy Produced by Laser Powder Bed Fusion

  • Yuan Meng,
  • Xianglong Wang,
  • Jinjun Wu,
  • Haojie Wang and ,
  • Ping Gan,
  • Lei Lu,
  • Chengjie Li,
  • Tongling Ma,
  • Jun Niu and
  • Zhigang Zhang
  • + 5 authors+ 0 author

3 November 2025

Ti65 high-temperature titanium alloy, known for its exceptional high-temperature mechanical properties and oxidation resistance, demonstrates considerable potential for aerospace applications. Nevertheless, conventional manufacturing techniques are o...

(This article belongs to the Section Applied Industrial Technologies)