Recycling waste from the production and consumption of heat-resistant alloys to return them to production is an urgent task due to the high cost of the components contained in these alloys. The kinetics and conditions of the acid leaching process of...
The main purpose of this paper was to study the efficiency of using diamond-like carbon (DLC) coatings based on a-C:H:Si with a pre-formed CrAlSiN sublayer to increase the cutting ability of ball end mills made of KFM-39 cemented carbide at a speed o...
This paper presents an analysis and theoretical model for assessing the quality and accuracy of wire-cut electro-discharge machining (WEDM) of products made from novel heat-resistant nickel alloys such as CrNi56KVMTYB. It is observed that WEDM proces...
Modern methods and technologies for the creation and processing of materials provide great opportunities for research. This work is devoted to the study of the causes of hot cracks, as well as the application of an analytical method for assessing the...
In modern aviation production, innovative hard-to-machine materials with unique physical and mechanical properties are being used increasingly. When processing such materials, the weakest link in the technological chain of production is the metal-cut...
This study investigates the influence of groove geometry on the high-temperature creep life and fracture behavior of Dissimilar Metal Welds (DMWs) between low-alloy steel 2.25Cr1Mo and austenitic stainless steel 347H using Inconel 82 nickel-based fil...
The blades of modern gas turbine engines are complex structures made of heat-resistant nickel alloys with a complex system of internal cavities. The article describes a method of strengthening samples of a heat-resistant Ni-Cr alloy by applying a com...
The paper presents the results of the analysis of the resistance to hydrogen and high-temperature salt corrosion of the developed alloy of the CM88Y type for the turbine blades of gas turbine engines for marine and power purposes in comparison with t...
This paper presents the research results of one of the main technological parameters of belt grinding, i.e., the cutting speed while machining corrosion- and heat-resistant, structural carbon and structural alloy steels, aluminum, and heat-resistant...
Friction stir welding (FSW) of titanium alloy was carried out using liquid cooling of the FSW tool made of heat-resistant nickel superalloy. Cooling of the nickel superalloy tool was performed by means of circulating water inside the tool. The FSW jo...
Belt grinding of flat surfaces of typical parts made of steel and alloys, such as grooves, shoulders, ends, and long workpieces, is a good alternative to milling. Several factors can influence the belt grinding process of flat surfaces of metals, suc...
Additive manufacturing, particularly selective laser melting, presents exciting possibilities for fabricating components from high-temperature nickel-based superalloys. Controlling microstructural features and minimizing defects in fabricated specime...
The influence of alloying elements on the cohesive strength of metal heat-resistant alloys (HRAs) is analyzed. Special parameters are introduced to characterize the individual contribution of each alloying element. These are the partial molar cohesio...
This article presents a methodology for designing belt grinding operations with grinding and lapping machines. It provides the results of a study on the machinability of various steels and alloys with belt grinding, which are then classified accordin...
The effects of red mud on the microstructures and high-temperature tensile properties of the ZL109 aluminum alloy have been investigated. Red mud/ZL109-based composite materials with added red mud (a major byproduct of the aluminum industry), which h...
Today, the machining of heat-resistant alloys based on triple, quad, or penta equilibria high-entropy alloy systems of elements (ternary, quaternary, quinary iron-, titanium-, or nickel-rich alloys), including dual-phase by Gibb’s phase rule, s...
Titanium alloys are widely used in industry, especially (α+β)-alloys, among which Ti-6Al-4V alloy is the most popular one. Another common alloy that often appears in patents for titanium products is Ti-4Al-3Mo-1V. Here, we investigate weld...
We considered possibilities of an application of diffractive free-form optics in laser processing of metallic materials in aerospace production. Based on the solution of the inverse problem of heat conduction, an algorithm was developed that calculat...
The article compares the properties of multilayer composite wear-resistant coatings of Zr–ZrN–(Zr, Mo, Al)N, Ti–TiN–(Ti, Mo, Al)N, and Cr–CrN–(Cr, Mo, Al)N. The investigation was focused on hardness, resistance to fracture during scratch tests, eleme...
This paper presents results of the research focused on the possibility of the restoration of the shape parts of molds made of X15CrNiSi20-12 (EN 100 95) heat-resistant austenitic chromium-nickel stainless steel working in high-pressure die casting of...
In this article, we present the results of a study of the effect of TiC particle size on the microstructure and properties of a composite material based on the heat-resistant nickel alloy Inconel 718. Composite materials with the addition of 1% mass...
Extreme working conditions place high demands on material properties. For example, tools for friction stir welding of titanium alloys must be highly wear-resistant, have high strength at high temperatures, and also have high adhesion properties. Thes...
This work explores the possibility of using friction stir processing to harden the Ti-6Al-4V titanium alloy material produced by wire-feed electron beam additive manufacturing. For this purpose, thin-walled workpieces of titanium alloy with a height...
A focus towards industrial energy efficiency explains the current interest in light and high-strength materials and welding and processing technologies. Among the latest popular materials are titanium alloys, which are difficult to process and weld....
This paper presents the results of measurements of the spall strength and elastic-plastic proper-ties, under dynamic and static loads, of the high-strength heat-resistant nickel-chromium alloy Inconel 625, obtained by the direct laser deposition meth...
Nickel–aluminum (NiAl) alloys appear to be remarkably resistant to heat and corrosion, and are used in heat-treatment furnaces. This study utilizes molecular dynamics simulations to explore the structural characteristics of a nickel–alumi...
It has been demonstrated that a monomolecular surface film with semiconducting characteristics forms on an austenitic, corrosion- and heat-resistant chromium–nickel steel with 0.10 wt.% C, 20 wt.% Cr, 9 wt.% Ni, and 6 wt.% Mn (10Kh20N9G6), micr...
The electromagnetic rail catapult is a device that converts electrical energy into kinetic energy, which means that the strength of electrical energy directly affects the muzzle speed of armature. In addition, the electrical conductivity, electromagn...
Heat input, a crucial factor in the optimization of high-temperature thermocouple laser welding, has a significant impact on the appearance and mechanical properties of dissimilar welded joints involving stainless-steel- and nickel-based alloys. This...
The influence of heat input (HI) on the microstructure, microhardness, electrochemical corrosion performance of cold metal transfer additively manufactured (CMTAM) nickel–aluminum bronze alloys was investigated. The nickel–aluminum bronze...
This work examines the effect of nickel (Ni) and cobalt (Co) concentrations on wear resistance behavior of Cu-xNi-yCo-Cr-Si (x = 8−9 wt%, y = 1−2 wt%) and the zirconium (Zr) addition, in order to obtain an alloy with similar or better properties than...
Nickel-based superalloys have been widely used in the aerospace, petrochemical, and marine fields and others because of their good oxidation resistance, corrosion resistance, stability, and reliability at various temperatures. However, as a nickel-ba...
Electron-beam additive manufacturing is one of the most promising methods for creating complex metal parts and structures. Additive manufacturing has already gained wide acceptance in the creation of various constructions from aluminum, copper, titan...
High-entropy alloys (HEAs) are recognized as a class of advanced materials with outstanding mechanical properties and corrosion resistance. Among these, nickel-based HEAs stand out for their impressive strength, ductility, and oxidation resistance. T...
The high cutting temperature and poor thermal diffusion efficiency of nickel-based alloys during deep hole machining have become technical challenges in the hole machining field. In this paper, a finite element simulation model of Inconel-718 BTA ord...
Joining heat conducting alloys, such as copper and its alloys, to heat resistant nickel-based superalloys has vast applications in nuclear power plants (including future fusion reactors) and liquid propellant launch vehicles. On the other hand, fusio...
Introduction: Modern endodontics aims to decrease the bacterial load from the complex endodontic space. Over the years, improvements in the operative phases have led to a considerable increase in the success rate of endodontic treatments. The shaping...
Duplex stainless steels were first manufactured early in the 20th century, but it was the introduction in the 1970s of the argon-oxygen decarburisation (AOD) steel making process and the addition of nitrogen to these steels, that made the alloys stro...
Nickel-Copper (Ni-Cu) alloys exhibit simultaneously high strength and toughness, excellent corrosion resistance, and may show good wear resistance. Therefore, they are widely used in the chemical, oil, and marine industries for manufacturing of vario...
Currently, an important fundamental problem of practical importance is the production of high-quality solid-phase compounds of various metals. This paper presents a theoretical model that allows one to study the diffusion process in nickel-base refra...
In the present study, the bioactivity, cytotoxicity, and tribological properties of a nickel-free austenitic stainless steel produced via the mechanical alloying of elemental iron, chromium, and manganese nitride powders following by hot isostatic pr...
Welded cable composed of nickel–chromium (Ni-Cr) alloy and copper is a crucial component in the resistance heating technology used for heavy oil production. Tungsten inert gas (TIG) welding was employed to join the copper and Ni-Cr alloy using...
Laser surface treatment on two different types of nickel–chromium white cast iron (Ni-hard) alloys (Ni-hard 1 and Ni-hard 4) was investigated. Nd:YAG laser of 2.2-kw with continuous wave was used. Ni-hard alloys are promising engineering materi...
Aluminum bronze is a complex group of copper-based alloys that may include up to 14% aluminum, but lower amounts of nickel and iron are also added, as they differently affect alloy characteristics such as strength, ductility, and corrosion resistance...
The study of fatigue behaviors for nickel-base superalloys is very significant because fatigue damage results in serious consequences. In this paper, two kinds of heat treatment procedures (Pro.I and Pro.II) were taken to investigate the effect of he...
In this work, the corrosion behavior and surface reactivity of as-cast and heat-treated nickel aluminum bronze casting alloy (UNS C95800) in 3.5 wt% NaCl solution is investigated under stagnant and flow conditions. Increasing flow rate conditions are...
WAAM is a technique for fabricating large-scale metallic components in an efficient and cost-effective way. Inconel alloys are a nickel-based superalloy popular for their excellent mechanical properties and corrosion resistance. They have been widely...
Inconel 718 is a nickel-based superalloy that has a wide range of applications in the industries that require corrosion resistance or high-temperature resistance. It is well known that parts display internal stresses, anisotropy, and alloying element...
The joining of dissimilar hard metals such as high-strength steel and nickel-based alloy is required for shipbuilding and offshore applications to enhance the strength, fracture toughness, and corrosion resistance of the exposed parts. However, the j...
This paper deals with the investigation of complex-alloyed nickel aluminides obtained from oxide compounds by aluminothermic reduction. The aim of the work was to study and develop the physicochemical basis for obtaining complex-alloyed nickel alumin...
of 3