Skip to Content

Most Recent

  • Proceeding Paper
  • Open Access
2,725 Views
7 Pages

The design of functional paper coatings with excellent barrier properties, including water repellence, anti-microbial properties, and recyclability, is highly demanded in view of the sustainable use of paper as flexible substrates for various industr...

(This article belongs to the Proceedings of The 1st International Online Conference on Biomimetics)
  • Proceeding Paper
  • Open Access
2,041 Views
7 Pages

Development of a Process for Low-Cost LFP Batteries Treatment

  • Rafaella-Aikaterini Megaloudi,
  • Alexandros Galanis,
  • Paschalis Oustadakis and
  • Anthimos Xenidis

The recycling of lithium iron phosphate (LiFePO4) batteries from electric and hybrid vehicles was investigated, by applying mechanical pretreatment and hydrometallurgical methods. The aim was to extract lithium (Li) into the aqueous solution and prec...

(This article belongs to the Proceedings of The 2nd International Conference on Raw Materials and Circular Economy “RawMat2023”)
  • Proceeding Paper
  • Open Access
1,461 Views
9 Pages

Geothermal energy is typically produced from underground reservoirs using water as the working fluid to transfer heat energy to surface and eventually to the delivery point. CO2 has been proposed as an alternative working fluid due to its improved mo...

(This article belongs to the Proceedings of The 2nd International Conference on Raw Materials and Circular Economy “RawMat2023”)
  • Proceeding Paper
  • Open Access
2 Citations
2,330 Views
7 Pages

A computational fluid dynamics-based study of a corrugated wing section inspired by the dragonfly wing was performed for a low Reynolds number (10’000), focusing on gliding flight. The aerodynamic characteristics are compared to those of a typi...

(This article belongs to the Proceedings of The 1st International Online Conference on Biomimetics)
  • Proceeding Paper
  • Open Access
1,769 Views
8 Pages

Caninoid Necro-Robots: Geometrically Selected Rearticulation of Canine Mandibles

  • Ben Jørgensen,
  • Oscar Powell,
  • Freddie Coen,
  • Jack Lord and ,
  • Yang Han Ng,
  • Jeremiah Brennan,
  • Gurå Therese Bergkvist and
  • Parvez Alam
  • + 3 authors+ 0 author

In line with Sustainable Development Goal 9 (sustainable industrialisation and innovation), environmentally responsible engineering designs in modern robotics should consider factors such as renewability, sustainability, and biodegradability. The rob...

(This article belongs to the Proceedings of The 1st International Online Conference on Biomimetics)
  • Proceeding Paper
  • Open Access
2,755 Views
7 Pages

Fish Scale-Inspired Stab-Resistant Body Armour

  • Sidharath Sharma and
  • Parvez Alam

While commercially available lightweight “stab-proof” apparel exists, it offers little resistance to true stabbing as it is primarily designed to withstand slash attacks. Yet, crimes involving the use of a knife or sharp instrument have c...

(This article belongs to the Proceedings of The 1st International Online Conference on Biomimetics)
  • Proceeding Paper
  • Open Access
1,536 Views
12 Pages

Low-Velocity Impact Behaviour of Biomimetic Cornstalk-Inspired Lightweight Structures

  • Shakib Hyder Siddique,
  • Paul J. Hazell,
  • Gerald G. Pereira,
  • Hongxu Wang and
  • Juan P. Escobedo

This study investigates the dynamic response and damage characteristics of cornstalk-inspired lightweight structures. Specimens were fabricated via 3D printing using Acrylonitrile Butadiene Styrene (ABS) as the chosen thermoplastic due to its toughne...

(This article belongs to the Proceedings of The 1st International Online Conference on Biomimetics)
  • Proceeding Paper
  • Open Access
1 Citations
2,299 Views
7 Pages

This paper investigates the impact performance of a hybrid scale–tissue structure inspired by elasmoid fish scales. Acrylonitrile butadiene styrene (ABS) acted as the hard scales, whereas thermoplastic polyurethane (TPU) mimicked the soft tissu...

(This article belongs to the Proceedings of The 1st International Online Conference on Biomimetics)
  • Proceeding Paper
  • Open Access
4,169 Views
10 Pages

Electronic skin (e-skin) is an innovative technology characterized by its flexibility, stretchability, and self-healing properties, designed to biomimic the functionalities of human or animal skin. This technology is well-suited for applications in r...

(This article belongs to the Proceedings of The 1st International Online Conference on Biomimetics)
  • Proceeding Paper
  • Open Access
2 Citations
2,054 Views
4 Pages

The demand for green hydrogen (H2) and related technologies is expected to increase in the coming years, driven by climate changes and energy security of supply issues, amid the European and global energy crises. The European Green Deal and REpowerEU...

(This article belongs to the Proceedings of The International Conference on Advanced Nano Materials)
  • Proceeding Paper
  • Open Access
4,625 Views
7 Pages

Commercial NdFeB magnets are often coated with different thin layers to increase corrosion resistance. Fast and reliable test methods are being developed, especially for the automotive industry. Since corrosion test methods can inadequately describe...

(This article belongs to the Proceedings of The International Conference on Advanced Nano Materials)
  • Proceeding Paper
  • Open Access
967 Views
4 Pages

Urban noise is considered a growing problem in major cities around the world. This paper explores the development of a nanomembrane-based material for noise attenuation. The experimental results show that a combination of acoustic foam and nanomembra...

(This article belongs to the Proceedings of The International Conference on Advanced Nano Materials)
  • Proceeding Paper
  • Open Access
1 Citations
1,789 Views
5 Pages

Freestanding Flexible Carbon Nanofiber Mats for Energy Storage Applications

  • Bennet Brockhagen,
  • Christian Hellert,
  • Timo Grothe,
  • Uwe Güth and ,
  • Jan Lukas Storck,
  • Andrea Ehrmann and
  • Martin Wortmann
  • + 2 authors+ 0 author

Carbon nanofiber mats can be applied for diverse energy applications. Usually, they should be freestanding and show sufficient structural stability. Poly(acrylonitrile) (PAN) is often used as the base material for electrospinning due to its high carb...

(This article belongs to the Proceedings of The International Conference on Advanced Nano Materials)
  • Proceeding Paper
  • Open Access
1,543 Views
5 Pages

This study investigates the synthesis and characterization of SiO2-Gd2O3-Eu2O3 nanomaterials. The sol–gel method was employed using tetraethoxysilane (TEOS), gadolinium nitrate, and europium nitrate as precursors. The influence of rare earth ox...

(This article belongs to the Proceedings of The International Conference on Advanced Nano Materials)
  • Proceeding Paper
  • Open Access
1 Citations
2,344 Views
8 Pages

Our study considered porous Bouligand structured polymer, comprising polymer fibres with porous spaces between them. These are more complicated structures than the non-porous Bouligand, since the addition of porosity into the material creates a secon...

(This article belongs to the Proceedings of The 1st International Online Conference on Biomimetics)
  • Editorial
  • Open Access
1,037 Views
2 Pages

It is with great pleasure that we present the proceedings of the 19th and 20th International Conference on Nano and Energy Materials held at the University of Aveiro, Portugal [...]

(This article belongs to the Proceedings of The 19th and 20th International Conference on Advanced Nanomaterials)
  • Proceeding Paper
  • Open Access
2,350 Views
6 Pages

Eco-Friendly Composites—Environmental Assessment of Mine Tailings-Based Geopolymers

  • Kinga Korniejenko,
  • Beata Figiela,
  • Michał Łach and
  • Barbara Kozub

Resource efficiency is one of the basic principles of a circular economy (CE). It can be achieved by finding replacements for natural raw materials using anthropogenic raw materials, including by-products from industrial processes and waste materials...

(This article belongs to the Proceedings of The 2nd International Conference on Raw Materials and Circular Economy “RawMat2023”)
  • Proceeding Paper
  • Open Access
3,502 Views
6 Pages

This study examines the age-dependent development of compressive strength in Portland pozzolan cement (PPC) concrete under both curing and non-curing conditions. Four beam specimens, each measuring 500 mm × 200 mm × 350 mm, were prepared...

(This article belongs to the Proceedings of 10th International Conference on Advanced Engineering and Technology)
  • Proceeding Paper
  • Open Access
1 Citations
2,477 Views
6 Pages

Given the resistance of local communities to mineral extraction (“Not in My Back Yard” NIMBY), the energy transition and the new global economic model, which presupposes a sharp increase in the production of mineral raw materials, represe...

(This article belongs to the Proceedings of The 2nd International Conference on Raw Materials and Circular Economy “RawMat2023”)
  • Editorial
  • Open Access
944 Views
1 Page

In submitting conference proceedings to Materials Proceedings, the volume editors of the proceedings certify to the publisher that all papers published in this volume have been subjected to peer review administered by the volume editors [...]

(This article belongs to the Proceedings of The 1st International Online Conference on Functional Biomaterials)
  • Proceeding Paper
  • Open Access
1,983 Views
6 Pages

Fibroblast and THP-1 Cell Response to Multi-Arm PEGNHS-Modified Decellularized Porcine Pericardium

  • Sreypich Say,
  • Mika Suzuki,
  • Yoshihide Hashimoto,
  • Tsuyoshi Kimura and
  • Akio Kishida

The adhesion between an implant and a wound could result in over-bleeding when attempting to separate the two. To address this issue, a cell-repelling implant is preferred. In this study, a cell-repelling membrane was prepared by modifying decellular...

(This article belongs to the Proceedings of The 1st International Online Conference on Functional Biomaterials)
  • Proceeding Paper
  • Open Access
1 Citations
2,711 Views
10 Pages

A Proposal for the Use of Recycled Aggregates in Concrete in Greece

  • Maria Nomikou,
  • Charalampos Kouris,
  • Thalassis Karkaletsis,
  • Vasileios Kaloidas and
  • Efstratios Badogiannis

Regulations for building materials in Greece do not allow for the use of recycled aggregates in concrete. The HERACLES Group, aiming to motivate the adoption of provisions in the national regulation, launched a project to evaluate the safe use of rec...

(This article belongs to the Proceedings of The 2nd International Conference on Raw Materials and Circular Economy “RawMat2023”)
  • Proceeding Paper
  • Open Access
2,747 Views
5 Pages

The extraction of nickel and cobalt from a limonitic laterite sample, derived from a mine area in the Greek island of Euboea, was studied via an acid agitation leach process with nitric acid as the leaching agent, to determine the optimal conditions...

(This article belongs to the Proceedings of The 2nd International Conference on Raw Materials and Circular Economy “RawMat2023”)
  • Conference Report
  • Open Access
4,869 Views
63 Pages

The 1st International Online Conference on Functional Biomaterials (IOCFB2024) was held from 10 to 12 July 2024. The conference covered a wide range of implantable biomaterials development topics, such as drug delivery, tissue engineering, antibacter...

(This article belongs to the Proceedings of The 1st International Online Conference on Functional Biomaterials)
  • Proceeding Paper
  • Open Access
1 Citations
4,144 Views
5 Pages

Hydrometallurgical Recovery of Tin from Waste-Printed Circuit Boards

  • Dimitrios Vlasopoulos,
  • Paschalis Oustadakis,
  • Emmanouella Remoundaki and
  • Styliani Agatzini-Leonardou

This study presents a hydrometallurgical process for the leaching and recovery of tin from waste-printed circuit boards (wPCBs). The process aims to separate and recover tin from filter dust produced during the crushing of wPCBs in a recycling facili...

(This article belongs to the Proceedings of The 2nd International Conference on Raw Materials and Circular Economy “RawMat2023”)
  • Proceeding Paper
  • Open Access
3,872 Views
7 Pages

Carbon allotropes, including graphene, graphene oxide (GO) and reduced graphene oxide (r-GO), have the potential as coating nanomaterials to improve the performance of dental implants. Furthermore, graphene has demonstrated strong antibacterial activ...

(This article belongs to the Proceedings of The 1st International Online Conference on Functional Biomaterials)
  • Proceeding Paper
  • Open Access
3,941 Views
9 Pages

Green Innovation: Harnessing Chitosan Hydrogel Beads for Sustainable Lead Removal in Wastewater Treatment towards Qatar Vision 2030

  • Ghada Ali,
  • Mohamed Helally,
  • Marwa A. F. Alani,
  • Ala H. S. Alardah and ,
  • Rinad A. M. Khataby,
  • Maryam Y. Fazili,
  • Jassim H. A. Al-Maki,
  • Ali Mohamed,
  • Mostafa H. R. Sliem and
  • Noora Al-Qahtani
  • + 5 authors+ 0 author

Chitosan and its derivatives, known for their unique molecular structures and advantageous biological properties, have emerged as promising candidates for diverse applications, particularly in the realm of water treatment. This study investigated the...

(This article belongs to the Proceedings of 10th International Conference on Advanced Engineering and Technology)
  • Editorial
  • Open Access
1,187 Views
2 Pages

In submitting conference proceedings to Materials Proceedings, the Volume Editors of the proceedings certify to the publisher that all papers published in this volume have been subjected to peer review, administered by the Volume Editors [...]

(This article belongs to the Proceedings of 10th International Conference on Advanced Engineering and Technology)
  • Editorial
  • Open Access
1,484 Views
2 Pages

The International Conference on Advanced Engineering and Technology (ICAET) took place in Incheon, Incheon National University, South Korea from 17 to 19 May 2024 [...]

(This article belongs to the Proceedings of 10th International Conference on Advanced Engineering and Technology)
  • Proceeding Paper
  • Open Access
2 Citations
3,148 Views
16 Pages

Analysis and Selection of Multiple Machine Learning Methodologies in PyCaret for Monthly Electricity Consumption Demand Forecasting

  • José Orlando Quintana Quispe,
  • Alberto Cristobal Flores Quispe,
  • Nilton Cesar León Calvo and
  • Osmar Cuentas Toledo

This study investigates the application of several machine learning models using PyCaret to forecast the monthly demand for electricity consumption; we analyze historical data of monthly consumption readings for the Cuajone Mining Unit of the company...

(This article belongs to the Proceedings of 10th International Conference on Advanced Engineering and Technology)
  • Proceeding Paper
  • Open Access
1 Citations
2,773 Views
8 Pages

Plastic bottles have gained widespread popularity due to their durability, affordability, and recyclable nature. Phthalic acid esters (PAEs) are used as plasticizers in PET bottle production, which has raised concerns regarding their presence in the...

(This article belongs to the Proceedings of 10th International Conference on Advanced Engineering and Technology)
  • Proceeding Paper
  • Open Access
1 Citations
1,799 Views
12 Pages

Decontamination of Heavy and Trace Metals by Using Natural Sorbents: A Case Study of Chemical Laboratory Wastewater Treatment

  • Ahmed M. A. Aly,
  • Ahmed H. A. Emam,
  • Ala H. S. Alardah,
  • Rinad A. M. Edriss Khataby and ,
  • Ahmed Easa,
  • Ahmad A. Ahmadi,
  • Mohammad Ibrahim and
  • Noora Al-Qahtani
  • + 3 authors+ 0 author

Chemical wastewater treatment in laboratories poses a significant challenge due to the complex nature of the contaminants involved. Humic materials and clay have emerged as promising solutions for remediation due to their unique properties, such as h...

(This article belongs to the Proceedings of 10th International Conference on Advanced Engineering and Technology)
  • Proceeding Paper
  • Open Access
1 Citations
3,209 Views
12 Pages

Sustainable Hydrogen from Activated Carbon Derived from Fennel Waste

  • Mohamed Helally,
  • Manal B. Alhamdan,
  • Zainab Baloochi,
  • Hadir M. Ibrahim and ,
  • Naval Alhamdan,
  • Mostafa H. Sliem and
  • Noora Al-Qahtani
  • + 2 authors+ 0 author

Hydrogen represents an environmentally friendly and renewable energy source that could substitute fossil fuels and diminish greenhouse gas emissions. However, conventional methods of producing hydrogen are frequently expensive, energy-intensive, or d...

(This article belongs to the Proceedings of 10th International Conference on Advanced Engineering and Technology)
  • Proceeding Paper
  • Open Access
1 Citations
3,113 Views
7 Pages

Effect of Alumina as an Anti-Soiling Nanomaterial for Enhancing Photovoltaic Performance

  • Ala H. S. Alardah,
  • Alfajer M. Alrasheed,
  • Fatima Ahmad Alemadi,
  • Sumalatha Bonthula and ,
  • Enas Fares,
  • Rajender Boddula,
  • Ahmed Bahgat Radwan and
  • Noora Al-Qahtani
  • + 3 authors+ 0 author

Anti-soiling coatings are an essential tool for repelling or protecting surfaces from all sorts of particles, sand, and dust. It is usually used on photovoltaic (PV) cells and solar cells to generate electricity in dry regions such as Qatar and the G...

(This article belongs to the Proceedings of 10th International Conference on Advanced Engineering and Technology)
  • Proceeding Paper
  • Open Access
2,653 Views
8 Pages

The Idea of a “Loop Fragment” of the Finite Element Force Method in the Loop Resultant Method for Static Structural Analysis

  • H. H. Ngo,
  • V. V. Lalin,
  • I. I. Lalina,
  • A. M. Vavilova and ,
  • T. Q. T. Le and
  • T. M. D. Le
  • + 1 author+ 0 author

In this paper, a novel technique called a “loop fragment” (LF) is developed for structural analysis. A simple method is sufficient for establishing the loop system of framed structures using an original idea, the LF of the loop resultant...

(This article belongs to the Proceedings of 10th International Conference on Advanced Engineering and Technology)
  • Proceeding Paper
  • Open Access
1 Citations
4,193 Views
7 Pages

Intelligent Smart Coatings for Enhanced Corrosion Protection in Carbon Steel

  • Marwa A. Al-Ani,
  • Ala H. Al-Ardah,
  • Amal Mahgoub,
  • Noora Aboumattar and ,
  • Hadir Ibrahim,
  • Muddasir Nawaz,
  • R. A. Shakoor,
  • Ahmed Radwan and
  • Noora Al-Qahtani
  • + 4 authors+ 0 author

This study explores a new approach for corrosion protection of carbon steel, focusing on the application of polymeric coatings. Anticorrosive pigments were synthesized by loading 2-Mercaptobenzothiazole into zirconium oxide particles, and then an epo...

(This article belongs to the Proceedings of 10th International Conference on Advanced Engineering and Technology)
  • Proceeding Paper
  • Open Access
1,715 Views
6 Pages

Utilization of Stone Wool Kiln Ash in Cement-Based Materials

  • Tolga Aydın,
  • Zeynep Başaran Bundur,
  • Kaan Aksoy,
  • Barış Karabıyık and ,
  • Ezgi Perin,
  • Türker İnce and
  • Mihriban Sarı
  • + 2 authors+ 0 author

The main goal of this study was to validate a circular production route utilizing the waste ash generated during stone wool production in cementitious binders. To achieve this goal, two types of waste ash with different compositions and particle size...

(This article belongs to the Proceedings of The 2nd International Conference on Raw Materials and Circular Economy “RawMat2023”)
  • Proceeding Paper
  • Open Access
2,504 Views
10 Pages

Environmental Product Declaration Reporting in the Metal Sector

  • Maria Vastardi,
  • Eugenia Filtikaki,
  • George Mavraganis and
  • Katerina Adam

In an increasingly globalized and sustainability-conscious market, the environmental attributes of products consist of the information of primary importance for the sustainable development of manufacturing companies. The aim of the paper is to statis...

(This article belongs to the Proceedings of The 2nd International Conference on Raw Materials and Circular Economy “RawMat2023”)
  • Editorial
  • Open Access
1,120 Views
1 Page

Statement of Peer Review

  • Sofia Javed,
  • Waheed Miran,
  • Erum Pervaiz and
  • Iftikhar Ahmad

In submitting conference proceedings to Materials Proceedings, the volume editors of the proceedings certify to the publisher that all papers published in this volume have been subjected to peer review administered by the volume editors [...]

(This article belongs to the Proceedings of CEMP 2023)
  • Proceeding Paper
  • Open Access
1 Citations
3,583 Views
6 Pages

Evaluation of Thiosulfate for Gold Recovery from Pressure Oxidation Residues

  • Christiana Mystrioti,
  • Konstantina Kousta,
  • Nymphodora Papassiopi,
  • Katerina Adam and ,
  • Maria Taxiarchou and
  • Ioannis Paspaliaris
  • + 1 author+ 0 author

This paper investigated the potential of thiosulfate as an alternative to cyanide for gold recovery from pressure oxidation residues. Thiosulfate leaching experiments were conducted under controlled conditions, varying parameters such as initial thio...

(This article belongs to the Proceedings of The 2nd International Conference on Raw Materials and Circular Economy “RawMat2023”)
  • Proceeding Paper
  • Open Access
1 Citations
3,254 Views
6 Pages

Comparative Study of Conical and Cylindrical Basins for Gravitational Water Vortex Turbines

  • Usman Zafar,
  • Waqas Javid,
  • Furqan Jamil,
  • Shahid Iqbal and ,
  • Sikander Ahmed,
  • Abdul Aziz and
  • Tayyab Mehmood
  • + 2 authors+ 0 author

The demand for energy is gradually increasing; governments are looking for affordable and long-lasting solutions. Hydropower is crucial for addressing this issue. Low-head hydropower stations are necessary in certain regions due to their geographical...

(This article belongs to the Proceedings of CEMP 2023)
  • Proceeding Paper
  • Open Access
7 Citations
4,344 Views
4 Pages

Effect of Annealing Temperature on the Morphology, Structure and Optical Properties of Spin-Coated SnO2 Films for Solar Cell Application

  • Sumbal Hakeem,
  • Saqib Ali,
  • Muhammad Arman Liaqat,
  • Ayesha Jamshed and ,
  • Maryam Basit,
  • Muhammad Talha Masood and
  • Sofia Javed
  • + 2 authors+ 0 author

Perovskite solar cells (PSCs) have rapidly become a hot area of research in the photovoltaic field due to their (e.g., 26.2%), ease of fabrication, and low cost. Over the last decade the electron transport layer (ETL) has been one of the most critica...

(This article belongs to the Proceedings of CEMP 2023)
  • Proceeding Paper
  • Open Access
6 Citations
2,992 Views
5 Pages

This research delves into asymmetric supercapacitor (ASC) design, utilizing activated carbon from bamboo poles (AC) and electrodeposited polyaniline (PANI) on nickel foam (NF) as key active components. The composite electrode formed from AC and PANI...

(This article belongs to the Proceedings of CEMP 2023)
  • Proceeding Paper
  • Open Access
4,613 Views
7 Pages

The Rompas–Prajapat (Au-Co) and Sakatti (Ni-Cu-PGE) mineral deposits are among the only important discoveries of the last few decades in Finland. Both are partially located in Natura 2000 areas, which are among the most sensitive land use conte...

(This article belongs to the Proceedings of The 2nd International Conference on Raw Materials and Circular Economy “RawMat2023”)
  • Proceeding Paper
  • Open Access
2 Citations
2,594 Views
4 Pages

Fabrication of 2-D Nanosheets of NbSe2 via Liquid Phase Exfoliation and Their Morphological, Structural, and Optical Characterization

  • Ayesha Jamshed,
  • Maryam Basit,
  • Saqib Ali,
  • Sumbal Hakeem and ,
  • Muhammad Arman Liaqat,
  • Fatima Jamshed,
  • Rahim Jan and
  • Sofia Javed
  • + 3 authors+ 0 author

The present work is on the synthesis and investigation of the structural, optical, and optoelectrical properties of NbSe2 as an efficient material for energy conversion applications. The liquid phase exfoliation method was employed for the synthesis...

(This article belongs to the Proceedings of CEMP 2023)
  • Proceeding Paper
  • Open Access
2 Citations
10,397 Views
4 Pages

Rare earth elements (REEs) have emerged as strategic elements. Due to their unique electronic and magnetic properties, REEs have extensive applications in modern-day technologies. Two aspects make the supply chain of REEs very critical: first, more t...

(This article belongs to the Proceedings of CEMP 2023)
  • Proceeding Paper
  • Open Access
6 Citations
1,803 Views
4 Pages

Photovoltaic Performance of TiO2 Nanotubes Anodized under Different Voltages

  • Tayyaba Ghani,
  • Mazhar Mehmood,
  • Hira Kanwal,
  • Muniba Yaseen Naz and
  • Shazia Bashir

The present study was conducted to develop highly ordered facile TiO2 nanotubes (TiNTs) at two different applied voltages using two-step electrochemical anodization for the application in dye-sensitized solar cells (DSSCs). The nanotube fabrication i...

(This article belongs to the Proceedings of CEMP 2023)
  • Proceeding Paper
  • Open Access
2 Citations
2,170 Views
4 Pages

Lignin, a paper and pulp industry waste product, has attracted significant attention in recent years as a promising sustainable material for high-end energy applications. Herein, we examine lignin as a potential material for ionic thermoelectric hydr...

(This article belongs to the Proceedings of CEMP 2023)
  • Proceeding Paper
  • Open Access
2 Citations
3,735 Views
5 Pages

Enhancing Fresh Water Production in Solar Parabolic Dish Desalination System

  • Abdul Wahab,
  • Waqas Javid,
  • Hamza Ahmed,
  • Abdullah Sheikh and ,
  • Muhammad Shahbaz and
  • Shahid Iqbal
  • + 1 author+ 0 author

This study presents a solar-powered parabolic dish desalination system with a solar tracking system and conical receiver. It efficiently transforms solar radiation into heat and evaporates saltwater, producing fresh water. The system is sustainable a...

(This article belongs to the Proceedings of CEMP 2023)
XFacebookLinkedIn
Mater. Proc. - ISSN 2673-4605