Sol-gel methodologies are advantageous in the preparation of hybrid materials in front of the conventional addition of nanoparticles, because of the fine dispersion of the inorganic phase that can be reached in epoxy matrices. In addition, the use of...
A new biopolymer–silica hybrid material consisting of inulin and tetraethoxysilane (TEOS) for use as an adsorbent was successfully synthesized via the sol–gel method in acidic conditions. The hydrolysis and condensation processes were attained in wat...
The sol–gel process is a green method used in the last few decades to synthesize new organic–inorganic phosphorus-containing hybrid materials. The sol–gel synthesis is a green method because it takes place in mild conditions, mostly...
The corrosion process is a major source of metallic material degradation, particularly in aggressive environments, such as marine ones. Corrosion progression affects the service life of a given metallic structure, which may end in structural failure,...
In this research, fluorinated silica materials were prepared through sol–gel processing with tetraethylorthosilicate (TEOS), triethoxymethylsilane (MTES), and trimethoxyhexadecylsilane (HDTMES), using a fluorinated solution (FS) under acidic me...
The need to improve the expectancy and quality of life of subjects affected by disabling pathologies that require the replacement or regeneration of tissues or parts of the body has fueled the development of innovative, better-performing materials th...
Environmental protection, especially fouling protection, is a very topical and wide-ranging issue. This review explores the development, molecular design, and nanoarchitectonics of sol–gel-based hybrid coatings for antifouling applications. The...
Corrosion degradation of materials and metallic structures is one of the major issues that give rise to depreciation of assets, causing great financial outlays in their recovery and or prevention. Therefore, the development of active corrosion protec...
The interaction between tissues and biomaterials (BM) has the purpose of improving and replacing anatomical parts of the human body, avoiding the occurrence of adverse reactions in the host organism. Unfortunately, the early failure of implants canno...
This manuscript describes the synthesis and characterization of five new organic–inorganic hybrid (OIH) sol-gel materials that were obtained from a functionalized siloxane 3-glycidoxypropyltrimethoxysilane (GPTMS) by the reaction with the new J...
The aim of this study was to develop new chrome-free surface pretreatments for AA2024-T3 aluminum alloy. These pretreatments were based on hybrid organic–inorganic sol–gel thin films prepared from mixtures of γ-methacryloxypropyltri...
This article presents the results of comparative investigations of thermal parameters of hybrid sol–gel coatings (named TMZ) prepared from tetraethyl orthosilicate and organically modified 3-methacryloxypropyltrimethoxysilane. The coatings were...
Chitin and lignin primarily accumulate as bio-waste resulting from byproducts of crustacean crusts and plant biomass. Recently, their use has been proposed for diverse and unique bioengineering applications, amongst others. However, their weak mechan...
The aim of our study is to improve the aluminium alloy corrosion resistance with Organic-Inorganic Hybrid (OIH) sol-gel coating. Coatings are obtained from unusual formulation with precursors mixing: glycidoxypropyltrimethoxysilane (GPTMS), zirconium...
Hybrid coatings of SiO2 and recycled unsaturated polyester resin (R-UPR) from recycled polyethylene-terephthalate (PET) were prepared by the sol-gel process on glass substrates. First, SiO2 was synthesized by the sol-gel process using a tetraethyl or...
In this work, layers of a sol-gel hybrid matrix doped with metal oxide nanoparticles (TiO2 NPs) have been deposited on flat samples of AA6061-T6 aluminum alloy using the dip-coating technique, with the aim of obtaining coatings with better anti-corro...
Previous studies have shown that the barrier effect and the performance of organic-inorganic hybrid (OIH) sol-gel coatings are highly dependent on the coating deposition method as well as on the processing conditions. However, studies on how the coat...
Organic-inorganic hybrids (OIHs) are a type of material that can be obtained using the sol-gel process and has the advantages of organic and inorganic moieties in a single material. Polyetheramines have been widely used in the preparation of this typ...
This paper aims to synthesize, via the sol–gel method, a biomaterial usable in the medical field. Here, the silica-PEG-quercetin system was evaluated in relation to the different concentrations of PEG (0, 6, 12, 24, 50 wt%) and quercetin (0, 5,...
Organic–inorganic hybrids (OIH) are materials that can be easily synthesized by the sol–gel method and combine the advantages of organic and inorganic moieties within a single polymeric matrix. Imidazole derivatives are versatile organic...
An inorganic–organic coating based on glycidyl-functionalized silica and zirconia was synthesized by sol-gel technology to protect three types of AlMgSi (6XXX series) alloys against corrosion in aerospace applications. Different parameters such...
The current study reports on the impact of a series of functional alkoxysilanes on the wettability and structure of a well-established silicon/zirconium hybrid anticorrosion sol–gel coating. The selected functional alkoxysilanes comprise tetra...
The inherent reactivity of Al–Cu–Mg alloys is such that their use for building structural, maritime, and airplane components with great strength/weight ratios would not be possible without good anti-corrosion systems. These systems could...
AZ31B Mg alloys were anodized at different potentials using an alkaline electrolyte. Then, an epoxy-alkyl silane sol reinforced with SiO2 nanoparticles was prepared by sol–gel and deposited on top of the optimized anodic layers. 1-Methyl imidaz...
The aim of the work was to obtain hybrid coatings containing silver, copper, and zinc nanoparticles on the TiAlV medical alloy via a sol–gel process. The developed layers were designed to bring about a bactericidal and fungicidal effect, as wel...
This study used the sol–gel method to synthesize a non-halogenated, hyperbranched flame retardant containing nitrogen, phosphorus, and silicon (HBNPSi), which was then added to a polyurethane (PU) matrix to form an organic–inorganic hybri...
The interest in macromolecular alkoxysilyl-functionalized hybrids (self-assembling or nanostructured), which could be used as precursors in biomimetic silica precipitation and for the synthesis of hollow spherical silica particles, is growing. Nevert...
Natural phenol compounds are gaining a great deal of attention because of their potential use as prophylactic and therapeutic agents in many diseases, as well as in applied science for their preventing role in oxidation deterioration. With the aim to...
Nowadays, concrete degradation is a major problem in the civil engineering field. Concrete carbonation, one of the main sources of structures’ degradation, causes concrete’s pH to decrease; hence, enabling the necessary conditions for cor...
Organic–inorganic hybrids (OIH) are a versatile type of material that joins organic and inorganic moieties in a polymeric matrix and can be easily synthesized by the sol–gel method. OIH can be doped with chemosensors to yield an ion-sensi...
Experimental research in the field of science and technology of polymeric materials and their hybrid organic-inorganic systems has been and will continue to be based on the execution of tests to establish robust structure-morphology-property-processi...
Pre-hydrolysed/condensed tetraethyl orthosilicate (TEOS) was added to a solution of methyl methacrylate (MMA) and 3-methacryloxypropyltrimethoxysilane (MAPTMS), and then copolymerised for various times to study the influence of the latter on the stru...
This study was focused on the synthesis and characterization of Si/Zr-based hybrid sol-gel coatings with and without the addition of cerium(III) ions. The coatings were deposited on aluminum aiming to act as an effective and ecologically harmless alt...
Hybrid materials, composed of organic and inorganic components at the nanometer or molecular level, have emerged as a promising material class at the forefront of technological progress. Their potential applications in the biological and medical fiel...
Organic–inorganic hybrid materials have become indispensable high-performance and highly functional materials. This is owing to the improved dispersion control in hybrid materials and emergence of functional ionic liquids. Harmonization of both...
Organic-inorganic hybrid sols (Ti–O–Si precursor) were first synthesized by the sol-gel method at low addition of water, and were then employed to prepare a highly refractive hybrid optical film. This film was obtained by blending the Ti–O–Si precurs...
Here, we present a novel methodology for the preparation of P3HT:TiO2 quantum dots hybrid materials via water vapor flow-assisted sol-gel growth focusing on the structural, optical and electrical property characterization complemented with first-prin...
We fabricated titanium dioxide (TiO2)-silica (SiO2) nanocomposite structures with controlled morphology by a simple synthetic approach using cooperative sol-gel chemistry and block copolymer (BCP) self-assembly. Mixed TiO2-SiO2 sol-gel precursors wer...
The effect of temperature on the network formation of polysiloxane hybrids was evaluated since this type of material is currently in high demand. In the last decades, the deposition of these coatings on different substrates, mostly metals, has demons...
The failure of medical devices, such as bones prosthesis, is mainly due to inflammatory and infectious phenomena. Entrapping anti-inflammatory and antimicrobial agents inside the biomaterial matrix could avoid these phenomena. In this context, inorga...
The present work deals with the sol–gel synthesis of silica–poly (vinylpyrrolidone) hybrid materials. The nanohybrids (Si-PVP) have been prepared using an acidic catalyst at ambient temperature. Tetramethyl ortosilane (TMOS) was used as a...
Silver (Ag) nanoparticle-loaded strontium titanate (SrTiO3) nanoparticles were attempted to be synthesized by a sol-gel-hydrothermal method. We prepared the titanium oxide precursor gels incorporated with Ag+ and Sr2+ ions with various molar ratios,...
Photocatalytic coatings are difficult to obtain on textile materials because of the sometimes contradictory properties that must be achieved. In order to obtain a high efficiency of a photocatalytic effect, the metal–oxide semiconductor must be...
SiO2-based organic-inorganic hybrids (OIHs) are versatile materials whose properties may change significantly because of their thermal treatment. In fact, after their preparation at low temperature by the sol-gel method, they still have reactive sila...
Introduction [...]
This work outlines, for the first time, the fabrication of a whole hybrid sol-gel optofluidic platform by integrating a microfluidic biosensor platform with optical waveguides employing a standard photolithography process. To demonstrate the suitabil...
The properties of hybrid silica xerogels obtained by the sol-gel method are highly dependent on the precursor and the synthesis conditions. This study examines the influence of organic substituents of the precursor on the sol-gel process and determin...
We developed hybrid organic–inorganic sol–gel silica coatings with good durability in harsh environment (high temperatures, high vapor velocities) and with slightly hydrophobic behavior, sufficient to promote dropwise condensation (DWC) of pure steam...
In this study, a novel hybrid sol–gel coating on AA3003 substrate was developed and the effects of various waste material additives on the reinforcement of the sol–gel coating and the anticorrosion properties in the saline medium were inv...
Microorganism-cell-based biohybrid materials have attracted considerable attention over the last several decades. They are applied in a broad spectrum of areas, such as nanotechnologies, environmental biotechnology, biomedicine, synthetic chemistry,...
of 10