The density functional theory (DFT) based hybrid-method B3LYP has been used to study the interaction of the nitromethane molecule (CH3NO2) with the Au(111) surface. The perfect Au(111) surface has been represented by a rather large cluster model, Au2...
Light emission from the M-type enantiomer of a helicene derivative (2,13-bis(hydroxymethyl)[7]-thiaheterohelicene) adsorbed on the clean Au(111) and the C60-covered Au(111) surfaces were investigated by tunneling-current-induced light-emission techni...
The nature of the active sites of transition metal oxides during the oxygen evolution reaction (OER) has attracted much attention. Herein, we constructed well-defined nickel oxide/Au (111) model catalysts to study the relationship between the structu...
Adsorbate-induced surface segregation significantly influences the catalytic and electrochemical performance of bimetallic alloys. Using density functional theory (DFT), we investigated Rh segregation in Au–Rh(111) alloys under the influence of...
In this paper, the ohmic properties of Ti, Al, and Ti-Au composite electrodes on n-type (111) CdZnTe crystal deposited by vacuum evaporation method were first analyzed, and then the rapid annealing of Ti-Au electrode under Ar atmosphere with differen...
In this work, the functional character of complex α-Fe2O3(0001)/SrTiO3(111) and Au(111) islands/α-Fe2O3(0001)/SrTiO3(111) heterostructures has been proven as gas sensors at room temperature. Epitaxial Au islands and α-Fe2O3 thin film are grown by pul...
Au–Au surface activated bonding is promising for room-temperature bonding. The use of Ar plasma vs. O2 plasma for pretreatment was investigated for room-temperature wafer-scale Au–Au bonding using ultrathin Au films (<50 nm) in ambient...
The formation of a binary porphyrinic self-assembled system between meso-tetrakis(4-carboxyphenyl) porphyrin (TCPP) and meso-tetrakis(4-dimethyl amino) porphyrin (TDAP) was easily designed through non-covalent interactions in solution and adsorbed on...
Low-energy electron diffraction (LEED), scanning tunneling microscopy (STM) and density functional theory (DFT) calculations have been used to investigate the atomic and electronic structure of gold deposited (between 0.8 and 1.0 monolayer) on the Pt...
Erect Au nanocones with high adhesion to substrates are obtained by simply drawing from Au nano-films through Au-Si eutectic welding. Nanocones with diameters ranging from about 5 to 150 nm and length ranging from about 60 to 600 nm can be observed o...
Au-Au surface activated bonding (SAB) using ultrathin Au films is effective for room-temperature pressureless wafer bonding. This paper reports the effect of the film thickness (15–500 nm) and surface roughness (0.3–1.6 nm) on room-temper...
The leaching phenomenon of gold (Au) nanomaterials by Pb2+ ions in the presence of 2-mercaptoethanol (2-ME) and thiosulfate (S2O32− ion) has been systematically applied to a Pb2+ ion sensor. To further investigate the role of Pb2+ ions in senso...
The on-surface C–H bond activation and coupling reaction is a powerful approach to constructing fine-tuned surface nanostructures. It is quite challenging to control its regioselectivity due to the inertness of the C–H bond involved. With...
Vanadium diselenide (VSe2), a member of the transition metal dichalcogenides (TMDs), is proposed with intriguing properties. However, a comprehensive investigation of VSe2 (especially regarding on the growth mechanism) is still lacking. Herein, with...
Owing to the growing hardware capabilities and the enhancing efficacy of computational methodologies, computational chemistry approaches have constantly become more important in the development of novel anticancer metallodrugs. Besides traditional Pt...
Interdiffusion between Si substrate and nanorod arrays of Au, Pt, and AuPt nanoalloys is investigated at temperatures lower than the AuSi eutectic temperature. When the nanorod is pure Au, Si diffusion from the substrate is very rapid. Au atoms are c...
Welding between an AuNi9 microwire and Au microlayer is of great importance for fabricating electrical contact structures for high precision inertial devices, satellite slip ring brushes, robots, etc. In this paper, the achievement of parallel micro-...
The Lewis-acidic character and robustness of NHC-Au(I) complexes enable them to catalyze a large number of reactions, and they are enthroned as the catalysts of choice for many transformations among polyunsaturated substrates. More recently, Au(I)/Au...
This paper reports on the development of stable tumor-specific gold nanoparticles (AuNPs) activated by neutron irradiation as a therapeutic option for the treatment of cancer with high tumor angiogenesis. The AuNPs were designed with different mono-...
The Turkevich synthesis method of Au nanoparticles (AuNPs) was adopted for direct fabrication of SiO2@Au and TiO2@Au core-shell nanostructures. In this method, chloroauric acid was reduced with trisodium citrate in the presence of amine-functionalize...
Gold (Au) is one of the noble metals most used as a catalyst in the growth of one-dimensional nanostructures. Usually, an ultra-thin Au film is coated followed by thermal annealing to obtain Au nanoclusters. Although annealing temperature, duration a...
Au@Pt@Au core-shell nanoparticles, synthesized through chemical reduction, are utilized to improve the photoelectric performance of perovskite solar cells (PSCs) in which carbon films are used as the counter electrode, and the hole-transporting layer...
In this study, the typical oxidation process of Au/C catalysts exposed to HCl is presented. Although the process violates the standard electrode potentials, the “oxidized” tendency of Au(0) species is analyzed. This oxidation behavior can...
The phase equilibria of the Ag-Al-Au ternary system and the solid-state reaction couple for the Au-xAg/Al system were investigated isothermally at 450 °C. By investigating the Ag-Al-Au ternary system and its isothermal section, this study aims to...
Orientation-dependent performance has been demonstrated in different materials consisting of nanoparticles on substrates. The fabrication of desirably oriented nanoparticles requires knowledge of orientation selection rules. Based on the Wulff–...
In this research, a method was developed for fabricating Au–Au nanorod array substrates through the deposition of large-area Au nanostructures on an Au nanorod array using a galvanic cell reaction. The incorporation of a granular structure enha...
Iron core–gold shell (Fe@Au) nanoparticles are prominent for their magnetic and optical properties, which are especially beneficial for biomedical uses. Some experiments were carried out to produce Fe@Au particles with a one-step synthesis meth...
The photocatalytic degradation of methylene blue (MB) dye has been performed under UV irradiation in aqueous suspension, employing photocatalysts based on Au (1.5 wt %) and AuCu (Au/Cu = 1, 2.0 wt %), and supported on SBA-15-ordered mesoporous silica...
A chip-level hermetic package for a high-temperature graphene pressure sensor was investigated. The silicon cap, chip and substrate were stacked by Cu–Sn and Au–Au bonding to enable wide-range measurements while guaranteeing a high hermet...
Using P25 as the titanium source and based on a hydrothermal route, we have synthesized CaTiO3 nanocuboids (NCs) with the width of 0.3–0.5 μm and length of 0.8–1.1 μm, and systematically investigated their growth process. Au nanoparticles (NPs) of 3–...
The selective oxidation of veratryl alcohol (VA), a model compound of lignin, with oxygen molecules to produce veratraldehyde (VAld) was studied over monometallic Au, Pd, and bimetallic Au:Pd nanoparticles supported on a Ce0.62Zr0.38O2 mixed oxide fo...
Catalytic systems based on bimetallic Pd-Au particles deposited on SiO2 were prepared by ultrasonically assisted water impregnation and used in the hydrogenation of furfural obtained by the acidic hydrolysis of waste biomass (brewery’s spent gr...
Au nanoparticles were synthesized in a soft template of pseudo-polyanions composed of polyvinylpyrrolidone (PVP) and sodium dodecyl sulfate (SDS) by the in situ reduction of chloroauric acid (HAuCl4) with PVP. The particle sizes and morphologies of t...
The effects of solution concentration and pH on the formation and surface structure of 2-pyrimidinethiolate (2PymS) self-assembled monolayers (SAMs) on Au(111) via the adsorption of 2,2′-dipyrimidyl disulfide (DPymDS) were examined using scanni...
We reported that highly (111)-oriented nanotwinned gold can be fabricated by periodical-reverse electroplating. The as-deposited films are shown to have a strong (111) preferred orientation, increasing with the reverse current time. The ratios of I(1...
Chiral gold nanomaterials have promising applications in biomedicine, catalysis, optics and other fields. However, the complexity of their chiral sources has led to many challenges in terms of the functional design and controlled synthesis. In this p...
A genetic resource for studying genetic architecture of agronomic traits and environmental adaptation is essential for crop improvements. Here, we report the development of a rice nested association mapping population (aus-NAM) using 7 aus varieties...
The electronic structure of the Pt/Au(111) heterostructures with a number of Pt monolayers n ranging from one to three is studied in the density-functional-theory framework. The calculations demonstrate that the deposition of the Pt atomic thin films...
Background/Objectives: The 2023 revision of the Bethesda System for Reporting Thyroid Cytopathology (BSRTC) simplified the subcategorization of category III into two groups: “AUS-nuclear” and “AUS-other”. The aim of this study...
The effect of solution pH on the formation and surface structure of 2-pyrazinethiolate (2-PyzS) self-assembled monolayers (SAMs) formed by the adsorption of 2-mercaptopyrazine (2-PyzSH) on Au(111) was investigated using scanning tunneling microscopy...
Localized surface plasmon resonance (LSPR) gas sensors are gaining increasing importance due to their unique tuneable functional properties. Au-WO3−x nanocomposite coatings, in particular, can be outstandingly sensitive to many different gases....
Most human rotaviruses belong to the Wa-like, DS-1-like, or AU-1-like genotype constellation. The AU-1-like constellation, albeit minor, captured attention because its prototype strain AU-1 originated from feline rotavirus, leading to the concept of...
We recently found that polyvinylpyrrolidone (PVP)-protected metal nanoparticles dispersed in water/butanol mixture spontaneously float to the air/water interface and form two-dimensional assemblies due to classical surface excess theory and Rayleigh&...
To boost the electrocatalytic methanol oxidation reaction (MOR) of Platinum (Pt), making binary PtM (M = transition metals, for example, Fe, Cu, and Ni) with specific morphology is known as a promising method. Although great progress has been made in...
Heterogeneous grains in the heavy fractions of the placers of the Olkhovaya-1 river (Kamchatka Cape Peninsula, Eastern Kamchatka, Russia) containing Au-Ag, Au-Cu, and Au-Ag-Cu particles were analyzed using scanning electron microscopy, electron-probe...
Bladder cancer and prostate cancer are the most common malignant tumors of the genitourinary system. Conventional strategies still face great challenges of high recurrence rate and severe trauma. Therefore, minimally invasive photothermal therapy (PT...
Au-doped MgO films were prepared by reactive sputtering of individual Mg and Au targets, and the Au doping effect on the electron-induced secondary electron emission (SEE) performance was explored by means of surface analysis, first-principle calcula...
The formation, surface structure, and thermal annealing effects of self-assembled monolayers (SAMs) via vapor deposition of 4-fluorobenzeneselenol (4-FBSeH) on Au(111) at room temperature were investigated using scanning tunneling microscopy (STM). T...
Plasmonic gold (Au) and Au-based nanocatalysts have received significant attention over the past few decades due to their unique visible light (VL) photocatalytic features for a wide variety of chemical reactions in the fields of environmental protec...
We examined the surface structure, binding conditions, electrochemical behavior, and thermal stability of self-assembled monolayers (SAMs) on Au(111) formed by N-(2-mercaptoethyl)heptanamide (MEHA) containing an amide group in an inner alkyl chain us...
of 156