An efficient flotation process was developed to selectively recover elemental sulfur from a high-sulfur pressure acid leaching residue of zinc sulfide concentrate. The process mineralogy analysis showed that the sulfur content reached 46.21%, and 81....
Diethyldithiocarbamate (DDTC) is employed in the sulfide ore flotation process due to its excellent collection performance. Herein, we investigated the interfacial adsorption behavior of DDTC on the four main mineral phases of high-sulfur residue: su...
Surface roughness is a crucial factor that affects the flotation performance of minerals. In this study, the effect of sulfuric acid corrosion on the surface roughness of calcite flotation was investigated through microflotation tests, scanning elect...
O-isopropyl-N-ethyl thionocarbamate (IPETC) collector was used to selectively recover elemental sulfur from a high-sulfur residue, and its flotation performance, structure–property relationship and adsorption mechanism to elemental sulfur were studie...
Sulfuration-amine flotation is the most commonly used method to separate zinc oxide ore, but its shortcomings such as unstable separation index and poor applicability to high mud-content raw ore limit its application in industry. In this study, the i...
The surface features of fluorapatite (FA, Ca5(PO4)3F) and dolomite (CaMg(CO3)2) conditioned with sulfuric acid (H2SO4) were examined through flotation experiments, contact angle tests, time-of-flight secondary ion mass spectrometry (TOF-SIMS), and FT...
The clean and efficient utilization of coal is a promising way to achieve carbon neutrality. Coking coal is a scarce resource and an important raw material in the steel industry. However, the presence of pyrite sulfur affects its clean utilization. N...
Sulfurization-assisted flotation is a key process that uses sulfur compounds to modify mineral surfaces, enhancing hydrophobicity and flotation efficiency, especially for copper oxide minerals. This study introduced the preliminary activation of mala...
Froth feature extraction plays a significant role in the monitoring and control of the flotation process. Image-based soft sensors have received a great deal of interest in the flotation process due to their low-cost and non-intrusive properties. Thi...
Enhanced sulfurization has always been the focus of research on the flotation of copper oxide minerals. In this study, combined ammonium–amine salts were innovatively applied to improve the sulfurization of azurite. Flotation tests were carried...
High alkalinity facilitates copper–sulfur flotation separation but also leads to issues such as high reagent consumption, pipeline scaling, and gold loss in tailings. The ore from a copper mine in Serbia contains 2.86% copper, 1.64 g/t gold, an...
Nickel smelting slag contains valuable metals including nickel and copper. Failure to recycle these metals wastes resources, and disposal of nickel slag in stockpiles results in environmental pollution. Nickel slag recycling is important, and metals...
This study investigated the removal of sulfur and iron from shungite rocks through different methods after fine grinding: flotation, magnetic separation, microwave treatment, and chemical leaching. In this work, first, a mineralogical study of shungi...
A preliminary beneficiation study of low-grade skarn phosphate rocks from Mactung tungsten deposit, along the Yukon and Northwest Territories border in Canada, was carried out through standard Bond Work Index, grinding test and laboratory batch flota...
A high sulfur content is one of the challenges in the processing of refractory bauxites in China. The high carbon content of bauxite makes it more difficult to deal with. Desulfurization and decarbonization are the critical issues in the efficient ex...
Exploring new ways to acquire niobium resources is essential to resolve niobium supply risks, due to the fact that, at present, 99% of niobium is controlled by only two countries. In the present work, a flotation technique was applied to separate nio...
It has only recently been discovered that naturally prevailing microorganisms have a notable role in flotation in addition to chemical process parameters and overall water quality. This study’s aim was to assess the prevailing microbial communities i...
Sphalerite is a common sulfide mineral, and xanthate is usually used as the collector of sphalerite flotation. In order to realize the simultaneous flotation of sphalerite- and zinc-containing oxide ores, in this paper, dodecylamine was used as the c...
Phosphate ore is an important strategic mineral resource. The efficient utilization of phosphate resources faces challenges such as low grade of raw ore and difficulty in discharging gangue minerals. One of the key problems to be solved urgently in t...
The selective separation of copper sulfide ore from iron sulfide minerals has always been a technical problem that urgently needs to be solved. This study conducted a process mineralogy research on a copper–tin polymetallic ore in Yunnan. The r...
There is 0.032% cobalt and 0.56% sulfur in the cobalt-bearing V–Ti tailings in the Panxi Region, with the metal sulfide minerals mainly including FeS2, Fe1−xS, Co3S4, and (Fe,Co)S2, and the gangue minerals mainly including aluminosilicate...
The natural wettability of apatite and dolomite and the effect of sulfuric acid (H2SO4) and sodium oleate (NaOl) on the floatability and wettability of both minerals were studied using single-mineral flotation and contact angle measurement. The flota...
The construction industry is the world’s largest emitter of greenhouse gases. The CO2 emission levels in the atmosphere are already reaching a tipping point and could cause severe climate change. An important element is the introduction of a te...
Sulfuration flotation is the most widely used technology in malachite beneficiation. However, the inhomogeneity of malachite surfaces usually results in a non-uniform sulfuration surface. The motivation of this work is attempt to adopt different func...
In this work, we applied the technology of magnetic treatment to the flotation of chalcopyrite. The mechanism of the effect of pre-magnetized butyl xanthate on chalcopyrite flotation was studied using monomineral flotation tests, adsorption tests, co...
Copper sulfide ores often contain significant amounts of silica and sulfur-bearing gangue minerals, complicating flotation efficiency. However, these challenges can be mitigated through collectorless flotation, which exploits the natural floatability...
Flotation was investigated to treat incineration fly ash with diesel, kerosene, TX-100, or SDS as a collector and methyl isobutyl carbinol (MIBC) or 2-Octyl alcohol as a frother. Fly ash was separated into light and residual materials. Comparison of...
Geological setting and mineral composition of (apatite)-nepheline-titanite ore from the Khibiny massif enable selective mining of titanite ore, and its processing with sulfuric-acid method, without preliminary concentration in flotation cells. In thi...
Phosphate ore is the dominating natural resource for the production of fertilizers and phosphorous chemical products. Flotation is the most widely employed technique to enrich apatite and remove the impurities for the separation of the phosphate ore....
In ores, chalcopyrite is usually associated with other sulfide minerals, such as sphalerite, galena, and pyrite, in a dispersed form, with complex mineralogical structures. Concentrates obtained by flotation of such ores are unsuitable for pyrometall...
This study employs microwave roasting to decompose smithsonite mineral (zinc carbonate) into zinc oxide, which then reacts with pyrite to sulfurize its surface, forming zinc sulfide. This process is beneficial for the flotation recovery of zinc oxide...
In this work, oxidizing roasting was combined with leaching to separate copper, lead, and zinc from a concentrate obtained by bulk flotation of a low-grade ore sourced from the Jiama mining area of Tibet. The flotation concentrate contained 7.79% Cu,...
Phosphorite, or phosphate rock, has garnered increasing attention in recent years as a promising unconventional resource for rare earth elements (REEs). This paper presents a processing scheme aimed at recovering both REEs and phosphate values from a...
The disadvantages of using lime to depress the flotation of copper-activated pyrite and pyrrhotite are well known. In this study, oxidized starch, prepared by the ozone nanobubble technology, was employed as an eco-friendly depressant for copper-acti...
Separating oxidized zinc minerals from flotation tailings is always a challenge. In this study, a flotation tailing from Wulagen zinc mine in China (Zn grade < 1%) was processed using froth flotation with combinations of amines (OPA 10, OPA 1214,...
This work investigates coal desulfurization by using reverse flotation. In this method, pyrite (the only source of sulfur in the studied coal) was separated from the meta-bituminous coal by using three different coal depressants (starch, dextrin and...
In this work, a complete beneficiation technical route combining physical and chemical methods, namely a roasting-flotation-leaching scheme, is proposed to produce a qualified grade Ti-concentrate from altered Vanadium titanomagnetite (VTM) ore. Base...
Elemental sulfur is an important non-metallic material that is widely used in various fields including chemical, metallurgical and sulfuric acid industries. Polymetallic sulfur slag (PSS) is an important secondary resource for the recovery of sulfur....
One of the stages of extracting gold and platinum from sulfide materials and circulating slags is the melting stage in ore-thermal and electric furnaces, where the melt is separated into matte and slag. Gold, platinum, and non-ferrous metals are conc...
Selective separation of gold-bearing pyrite from gold-free pyrite through flotation to improve the gold-to-sulfur ratio in the feed can significantly enhance the throughput of autoclaves, thus achieving efficient and clean processing of refractory py...
The mechanism of electrochemical interaction between chalcopyrite and hexagonal pyrrhotite was analyzed via electrochemical interaction, copper ion concentration testing, and X-ray photoelectron spectroscopy (XPS) characterization. Besides, the effec...
Flotation wastes are becoming a valuable secondary raw material and source of many metals and semimetals worldwide with the possibilities of industrial recycling. The flotation tailings contain oxide and sulfide minerals that have not been sufficient...
While extracting gold and silver from telluride-type gold deposits, it is beneficial to develop a comprehensive recovery technology for tellurium. In this paper, we report process mineralogy based on the backward processing technology and the low com...
The possibility of selective Cu and Zn leaching from the sample of old pyrite tailings, which is one of the most widespread types of solid waste forming during non-ferrous metal production, using sulfuric acid solutions and water was studied. It was...
In order to reduce the content of sulfur and ash in coal, improve the desulfurization and deashing rates, a combined experiment method of microwave magnetic separation-flotation was proposed for raw coal. The desulfurization and deashing rates of thr...
Sphalerite flotation is generally achieved by copper activation followed by xanthate collection. This study aims to propose a design idea to find novel collectors from the perspective of molecular design and prove the theoretical feasibility that the...
The contamination of sulfur emanating from pyrrhotite in magnetite concentrates has been a problem in iron ore processing. This study utilized froth flotation to float pyrrhotite away from magnetite using collectors of xanthate and dixanthogen. It wa...
Ammonium ions have positive effects on the sulfidization flotation of malachite; however, the underlying mechanisms remain poorly understood. In the present work, micro-flotation tests, field emission scanning electron microscopy (FESEM), energy disp...
The forced-air self-aspirating flotation machine is the core equipment for achieving a horizontal configuration in a large-scale flotation circuit. During scale-up, power consumption increases significantly due to the requirement for a greater pulp s...
The aim of this study is to explore the feasibility of using flotation wastewater from copper–porphyry ore processing to synthesize a gel that serves as a precursor for a polymer nanocomposite used in supercapacitor electrode fabrication. These...
of 3