Graphene nanoplatelets (GNPs)-reinforced titanium matrix composites (GNPs/Ti) have been found in extensive applications in aerospace and deep-sea industries, owing to their exceptional properties, including low density, high specific strength, and su...
In this paper, the applicability of aluminium matrix composites to high-temperature working conditions (not exceeding the Al melting point) was evaluated. The behaviour of Al-Ti-C composites at elevated temperatures was described based on microstruct...
Composite material uses ceramic reinforcement to add to the metal matrix to obtain higher material properties. Structural design is an important direction of composite research. The reinforcement distribution of the core-shell structure has the uniqu...
The 0.1–0.7 wt.% graphene oxide (GO)-reinforced Ti-matrix composites (TMCs) were prepared by the hot-pressed sintering method. The effects of GO content on the mechanical properties of TMCs were investigated. The microstructure of TMCs was anal...
In this paper, a new nanoscale metal Ti particle-reinforced Mg-3Al-1Zn matrix composite was successfully designed and prepared, which is mainly characterized by the fact that in addition to the “light” advantages of magnesium matrix compo...
At present, Al matrix composites (AMCs) have drawn much attention owing to their light weight, high specific strength, high thermal conductivity, and superior excellent wear resistance, which endows them with great potential in the aerospace, automob...
The present study focused on 10 wt.% TiB2@Ti/AlCoCrFeNi2.1 eutectic high-entropy alloy matrix composites (EHEAMCs), which were treated with furnace cooling (FC), air cooling (AC), and water cooling (WC) after being held at 1000 °C for 12 h, aimin...
In-situ TiB/TiC particle-reinforced titanium matrix composites (TMCs) based on a near-β Ti-5Al-5Mo-5V-3Cr alloy (Ti-5553) were synthesized by solid-state reaction with B4C and graphite particles during spark plasma sintering (SPS). In this study...
This study systematically investigates the effects of heat treatment at 800–1000 °C on the microstructure and mechanical properties of 10 wt.% TiB2@Ti/AlCoCrFeNi2.1 eutectic high-entropy alloy matrix composites (EHEAMCs) prepared by vacuum...
TiB crystal whiskers (TiBw) can be synthesized in situ in Ti alloy matrix through powder metallurgy for the preparation of a new type of ceramic fiber-reinforced Ti matrix composite (TMC) TiBw/Ti-6Al-4V. In the TiBw/Ti-6Al-4V TMC, the reinforced phas...
TiAl alloys have the potential to become a new generation of high-temperature materials due to their lightweight and high-strength properties, while the brittleness at room temperature and microstructure stability at elevated temperature are the key...
In this study, TiC particle-reinforced Cu-based composites were prepared by powder metallurgy and spark plasma sintering (SPS) techniques. The mechanical and electrical properties of TiC/Cu composites were analyzed in conjunction with micro-morpholog...
A Ti-15Mo/TiB metal–matrix composite was produced by spark plasma sintering at 1400 °C. The fractions of the elements in the initial powder mixture were 80.75 wt.% Ti, 14.25 wt.% Mo, and 5 wt.% TiB2. The initial structure of the synthesized composite...
Fatigue crack growth behavior of additively manufactured Ti metal matrix composite with TiB particles at room temperature was studied using a compact tension specimen and at the stress ratio of 0.1 (R = 0.1). The composite studied in this work was ma...
In this paper, a new hybrid metal matrix composite, named AZ91/(SiC + Ti)p, is presented. The commercial AZ91 magnesium alloy was chosen as the matrix. The composite was reinforced with both SiC and Ti particles. The investigated material was success...
Currently, metal–matrix composite materials are some of the most promising types of materials, and they combine the advantages of a metal matrix and reinforcing particles/fibres. Within the framework of this article, the high-temperature synthesis of...
In situ TiB2 particle-reinforced 7050Al alloy matrix composites are a new category of particulate metal matrix composites with improved mechanical and physical properties. At present, the study of machining in situ TiB2/Al composite is limited and no...
In this work, composites based on AA5049 aluminium alloy reinforced with multiwalled carbon nanotubes (CNTs) and multiwalled TiC-coated CNTs were prepared by powder metallurgy. For the first time, the effect of TiC coating on the CNT surface on the f...
As an advanced high-temperature structural material, TiAl alloy, is often used in the manufacturing of hot-end components of aviation and aerospace engines. However, it is difficult to increase the strength at high temperature, which limits its wider...
Anisotropy is one of the concerns of titanium matrix composites (TMCs) due to its impact on subsequent processing and safe serving. In this work, we demonstrate that simply by using cross-rolling (CR) rather than unidirectional rolling (UDR), signifi...
The Hugoniot elastic limit and spall strength were measured for a heat-resistant metal-matrix composite Inconel 625–5%NiTi–TiB2 alloy additive manufactured (AM) by direct laser deposition. The strength characteristics of the alloy were ob...
In this work, the TiC and Ti5Si3-reinforced Cu matrix composites with different contents were successfully prepared through Ti–SiC reaction in Cu melts; accordingly, the microstructures of them were studied, and the hardness of the composites w...
Lightweight aluminum matrix composites with superior strength and structural integrity are in high demand for next-generation transportation and aerospace applications. In this work, Al6060-based composites reinforced with ≈2 wt.% TiB2 were pro...
In this study, crack-free TiC/Ti composites with TiC content ranging from 0 to 15 wt.% were successfully fabricated using Direct Energy Deposition with a dual-feeder system that concomitantly delivered different amounts of both constituents into a hi...
The structure changes, microstructure evolution, and mechanical properties during Powder Metallurgy (PM) through High Vacuum Sintering of a Ti-TiH2 matrix reinforced with Titanium Diboride (TiB2) particles were investigated. Composites were fabricate...
In this study, ball-milled powder of Ti and Al was used to fabricate Ti–Al intermetallic compound-reinforced Al matrix composites by an in-situ reaction in cold-pressing sintering and hot-pressing sintering processes. The detailed microstructur...
The thermo–mechanical behavior of in situ TiB2/7050 Al metal matrix composites is investigated by quasi-static and Split Hopkinson Pressure Bar compression tests over a wide range of temperature (20~30 °C) and strain rate (0.001~5000 s&minu...
We fabricated fully dense titanium boride (TiB) whisker-reinforced Ti-6Al-4V alloy matrix (Ti6Al4V-TiB) composites, with a homogeneous dispersion, a TiB orientation perpendicular to the loading direction (; two-dimensional random direction) and an in...
In this study, we investigated the effect of adding two different intermetallics, Ti5Si3 and TiSi2, for the preparation of TiB2-SiC-B4C composites. As part of the research, stoichiometric composites consisting only of two phases TiB2 and SiC were obt...
TiB-reinforced Ti-3Al-2.5V matrix composites, in which TiB whiskers are oriented parallel to the direction of heat extrusion, were fabricated via mechanical alloying and hot isostatic pressing (HIP). To investigate the near-threshold fatigue crack pr...
Carbon-fiber-reinforced ultrahigh-temperature ceramic (C/UHTC) matrix composites are an attractive candidate for fabricating various hot structures. The present study aimed to establish a Si-free Zr–Ti melt-infiltration method for fabricating C/UHTC...
In-situ metallic glass matrix composites (MGMCs) are a new kind of promising structural engineering material. In this study, a comprehensive study about the corrosion behavior of in-situ Ti46Zr20V12Cu5Be17 MGMCs versus their size was conducted. It is...
Additive manufacturing (AM) techniques are widely investigated for the cost-effective use of titanium (Ti) alloys in various aerospace applications. One of the AM techniques developed for such applications is plasma transferred arc solid free-form fa...
This paper proposes a simple reactive melt infiltration process to improve the mechanical properties of silicon carbide (SiC) ceramics. SiC matrix composites were infiltrated by Al–Si (10 wt.%)–xTi melts at 900 °C for 4 h. The effects...
Titanium-based Metal Matrix Composites (MMCs) manufactured by additive manufacturing offer tremendous lightweighting opportunities. However, processing the high reinforcement contents needed to substantially improve elastic modulus while conserving s...
Ti-6.5Al-2Zr-1Mo-1V/TiB metal matrix composites with 3 wt.% of TiB2 were obtained using vacuum arc melting and spark plasma sintering methods and compared with an unreinforced Ti-6.5Al-2Zr-1Mo-1V alloy. The microstructures of the unreinforced Ti6.5Al...
Composite structure design is an important way to improve reinforcement strengthening efficiency. The dispersion of the external reinforcement is often not uniform enough, however, and it is agglomerated in the matrix, which cannot uniformly and effe...
High modulus steels are characterized by high specific strength and specific stiffness, which can be attributed to the presence of hard reinforced particles. This paper investigates two common iron matrix composites, namely Fe/TiB2 and Fe/TiC, prepar...
Metal-matrix composites (MMCs) are made of non-metallic reinforcements in metal matrixes, which have excellent hardness, corrosion, and wear resistance. They are also lightweight and may pose a higher strength-to-weight ratio as compared to commercia...
This paper investigates the structure and phase composition of Al–TiB2 metal matrix composites prepared from the Al–Ti–B system powder using self-propagating high-temperature synthesis (SHS) in semi-industrial conditions (the amount...
In this work, a 3D transient finite element (F.E.) model was established to investigate the temperature field distribution in laser processing of the Ti-6Al-4V substrate. The influences of laser power and scanning velocity on the molten pool state we...
In this study, a Ti-6Al-4V matrix composite reinforced with in situ synthesized TiB whiskers has been successfully produced from wasted chips by a cost-effective powder metallurgy route combining rapid heating and hot pressing. The effect of boron po...
This work studies the phase composition, structure and mechanical properties of composite materials obtained by high-temperature vacuum sintering of SHS-fabricated CrNi–TiN powders synthesized in semi-industrial-scale production conditions. It was fo...
This study presents a novel methodology for the fabrication of aluminum matrix composites (AMCs) reinforced with a hybrid of MAX phase (Ti3AlC2) and MXene (Ti3C2Tx) particles via vacuum hot-pressing sintering, aiming to enhance the mechanical propert...
Ceramic-particle-reinforced iron matrix composites (CPR-IMCs) have been used in many fields due to their excellent performance. In this study, using the fast resistance-sintering technology developed by our team, iron matrix composites (IMCs) reinfor...
The wide applicability of titanium (Ti) has prompted the analysis to improve its mechanical strength through the addition of different alloying elements. Among these, Ti materials with pre-mixed pure Ti and titanium nitride (TiN) powders as the start...
Nano-sized ceramic particle reinforced aluminum composites exhibit excellent room-temperature mechanical properties. However, there is limited research on the dry sliding wear behavior of those composites at elevated temperatures, which should be one...
TiB2-based ceramic matrix composites (CMCs) were fabricated using elemental powders of Ti, B and C. The self-propagating high temperature synthesis (SHS) was carried out for the highly exothermic “in situ” reaction of TiB2 formation and the “tailing”...
In order to improve the abrasion performance of 316Lss, make full use of its advantages and broaden its application fields, the tribological behavior of the TiC particles reinforced 316Lss composites—which were manufactured by selective laser m...
In this study, Ti-6Al-4V matrix composites reinforced with TiB ceramic whiskers were in situ synthesized and hydrogenated using the melt hydrogenation technique (MHT). The effects of MHT on the microstructure evolution and hot compression behavior of...
of 21