2020 May - 77 articles
This paper presents the production of an epoxy paint associated with a determined concentration of PAni emeraldine base binder, in order to increase dispersion of PAni polymer chains in the paint allow physical contact between PAni chains, the electr...
The friction behavior of the formed antifriction films and their effect on the functional properties of the composite based on the powder nickel alloy EI929 with solid lubricant CaF2 at high temperatures was investigated. An antifriction film was for...
We describe lightweight three-dimensional (3D) graphene hybrid SiO2 aerogels (GSAs) with hierarchically robust interconnected networks fabricated via an in situ deposition procedure after a hydrothermal assembling strategy with graphene oxide sheets....
Developing new thermoelectric materials with high performance can broaden the thermoelectric family and is the key to fulfill extreme condition applications. In this work, we proposed two new high-temperature thermoelectric materials—MgV2O5 and...
In this work, an anti-icing structured surface was fabricated by combining laser ablation with hydrothermal treatment. A micro-patterned surface on a Ti alloy (TC4) substrate was easily fabricated by a highly effective nanosecond pulsed laser ablatio...
A fiber laser was used to nitride Ti–6Al–4V titanium alloy the effect of the process parameters on the surface morphology was studied. The surface chemical composition of the nitride layer and the phase of black powder on the surface were...
In this review, we present a survey on hydrophobic surface treatments of concrete, important protection tools against deterioration and corrosion phenomena. In the frame of a standardized distinction in coatings, pore blockage, and impregnation metho...
Plasma Electrolytic Oxidation (PEO) is a surface treatment, similar to anodizing, that produces thick oxide films on the surface of metals. In the present work, PEO coatings were obtained on zinc-aluminized (ZA) carbon steel using a solution containi...
The paper summarizes current knowledge of growth defects in physical vapor deposition (PVD) coatings. A detailed historical overview is followed by a description of the types and evolution of growth defects. Growth defects are microscopic imperfectio...
Magnetic nanoparticles (MNPs) have been widely investigated as a strategy to improve the delivery efficiency of therapeutic and diagnostic agents. Substituted iron oxides or ferrite nanoparticles (NPs) such as CoFe2O4 represent an interesting and nov...
Bi2O3 nanocone films functionalized with an overlayer of TiO2 were deposited by d.c. reactive magnetron sputtering. The aforementioned nanocone structures were formed via a vapour-liquid-solid (VLS) growth, starting from a catalytic bismuth seed laye...
An inorganic–organic coating based on glycidyl-functionalized silica and zirconia was synthesized by sol-gel technology to protect three types of AlMgSi (6XXX series) alloys against corrosion in aerospace applications. Different parameters such...
Background: The impact of titanium nitride (TiN) coating on implant components is controversial. TiN coating is proposed as having superior biomechanical properties compared to conventional cobalt-chromium (CoCr) alloy. This study compared long-term...
This study is based on the film growth by non-classical crystallization, where charged nanoparticles (NPs) are the building block of film deposition. Extensive studies about the generation of charged NPs and their contribution to film deposition have...
In order to develop waterborne silicate anticorrosive coatings to replace solvent-based anticorrosive coatings used widely in the shipping industry, epoxy modified silicate emulsions were synthesized with different contents of epoxy resin, then aqueo...
Layered piezo-composite unimorph actuators have been studied by many research teams to provide active vibration control of thin-walled aerospace structures, control the shapes of aircraft wing airfoils, and control the fins of small missiles, because...
In this study, CdSe/ZnS core-shell quantum dots (QDs) with various dimensions were used as the color conversion materials. QDs with dimensions of 3 nm and 5 nm were excited by gallium nitride (GaN)-based blue micro-light-emitting diodes (micro-LEDs)...
Chemical solution deposition of BiFeO3 thin films is one of the most commercially available techniques to produce large-scale low-cost coatings for further application in memory devices. In this contribution, we implemented piezoresponse force and co...
Resveratrol (RES) is a polyphenolic compound which has shown beneficial pharmacological effects such as anti-inflammatory, antioxidant, and anti-cancer effects. However, poor aqueous solubility, bioavailability, and low stability are the major limita...
Atmospheric pressure plasma allows for the easy modification of materials’ surfaces for a wide range of technological applications. Coupling the aerosol injection of precursors with atmospheric pressure plasma largely extends the versatility of...
Hydrogen, which can be produced due to the accumulation of aluminum dust that reacts with water in wet dust removal systems, is a fire and explosion hazard. To reduce hydrogen production, sodium tungstate is used in hydrogen inhibition experiments to...
Samarium-doped ceria (SDC) and gadolinium-doped ceria (GDC) thin films were formed by e-beam vapor deposition on SiO2 substrate, changing the deposition rate and substrate temperature during the deposition. X-ray diffraction (XRD), scanning electron...
To manufacture superior-performance continuous casting mold components, high-velocity oxygen fuel spraying of a Stellite-1 coating was followed by its laser heat treatment at 1373–1473 K using a diode laser. The effects of the laser irradiation...
The modification of a metal implant surface with a biomimetic coating of bone-like anisotropic and graded porosity structures to improve its biological anchorage with the surrounding bone tissue at implanting, is still a high challenge. In this paper...
Recently, research has been conducted on nanocomposite thin films containing new additive elements in ZrN. In this paper, a method for depositing ZrCuSiN nanocomposite coatings using a ZrCuSi single target is presented. The ZrCuSi target that was use...
It was demonstrated that the mechanical shot peening (MSP) technique was a viable way to obtain a nanocrystalline layer on a large size pure titanium plate due to the MSP provided for severe plastic deformation (SPD) of surface high velocity balls im...
In this paper, a two-dimensional semi-analytical method is developed for the mechanical behavior analysis of multilayered solids subjected to surface contact loading, which is indispensable for realizing an optimized tribological performance from the...
of 2
