Two aspects of various steels’ weldability are considered in this article. The theoretical part presents general concepts related to steel’s weldability and the application of the most important methods for its determination. In the exper...
Despite its exceptional ability to join dissimilar materials and environmental friendliness, several challenges must be addressed in magnetic pulse welding (MPW). The conventional weldability criterion (i.e., minimum impact velocity) is analytically...
The paper presents the effects of waterproof coatings use to cover electrodes on the weldability of high-strength, low-alloy (HSLA) steel in water. With the aim of improving the weldability of S460N HSLA steel in water, modifications of welding fille...
Thermomechanical Controlled Processing (TMCP), the initial microstructure and mechanical properties of rolled products made of high-strength steels, have a significant influence on the properties and reliability of welded structures for low temperatu...
The microstructures and tensile properties of fresh and aged reformer furnace tubes and a fresh-to-aged welded joint were investigated to assess the weldability of fresh-to-aged reformer furnace tubes. Damage evaluation of the fresh-to-aged welded jo...
There is still a considerable gap in the definition of the weldability of Duplex Stainless Steel (DSS). A lack of clarity that is explained by the standard specification of the maximum content of equivalent carbon that defines a “weldable&rdquo...
The study is concerned with the assessment of the weldability of steel S700MC subjected to the thermomechanical control process (TMCP) and precipitation hardening and characterised by a high yield point. Appropriate mechanical and plastic properties...
The presented work is focused on the influence of imposed strain on the weldability of Dievar alloy. Two mechanisms affecting the microstructure and thus imparting changes in the mechanical properties were applied—heat treatment (hardening and...
In this study, weldability and mechanical properties of resistance spot weld bonding were investigated when adhesives with different properties were used. The results show that weldability is improved in resistance spot weld bonding when the adhesive...
The solid-state welding method known as friction stir welding (FSW) bonds two metallic work parts, whether the same or different, by plastically deforming the base metal. The frictional resistance between both metallic workpieces causes them to produ...
In this study, weldability and cracking susceptibility of SN 490C steel were firstly investigated. For this study, SN 490C thick plates which had been developed for anti-seismic steel of building structures were welded by flux-cored arc welding (FCAW...
Laser welding, a vital process in modern industry, offers significant technical and economic benefits, including improved part quality, precision, productivity, and cost reduction. This study significantly enhances our understanding of heat-treatable...
This article examines the weldability of ductile cast iron when the root weld is applied with a tungsten inert gas (TIG) welding process employing an Inconel 625 source rod, and when the filler welds are applied with electrodes coated with 97.6% Ni....
Additive manufacturing (AM) processes are playing a significant role in several industrial sectors such as construction and machine building industries, involving a wide variety of metallic materials. Among these, the AM of aluminium alloys has devel...
High-strength low-alloy (HSLA) steels have garnered significant attention owing to their widespread applications across various industries, with weldability being a particularly critical aspect. However, the impact toughness of the coarse-grained hea...
Aluminum–lithium (Al-Li) alloys are extensively employed in aerospace and space structures because of their low density, high specific stiffness, and excellent fatigue resistance. However, welding of these alloys remains challenging, since the...
Extrusion welding of AlMgSi(Cu) alloys is carried out by using porthole dies, as a result of which hollow shapes are formed with longitudinal seam welds. In the case of the inappropriate selection of the chemical composition of the aluminium alloy or...
This study advances the vibration-assisted welding (VAW) technique for joining medium-carbon, low-alloy steels, which are typically challenging to weld. Traditional welding methods suggest low linear energy and mandatory pre- and post-heating due to...
The combined use of laser beam and electric arc for welding thick clad steel plates in a single pass has been developed to solve the issues concerning the individual applications of the heat sources, such as the low filling efficiency of conventional...
With the development of lightweight aerospace structures, the use of the high-quality and efficient laser welding of near-α titanium alloys has received widespread attention and favor thanks to its superior comprehensive performance. The weldin...
The need to manufacture components out of copper is significantly increasing, particularly in the solar technology, semiconductor, and electric vehicle sectors. In the past few decades, infrared laser (IR) and green laser (GL) have been the primary t...
Magnetic pulse welding (MPW) is a promising solid-state joining process that utilizes electromagnetic forces to create high-speed, impact-like collisions between two metal components. This welding technique is widely known for its ability to join dis...
This study investigated the effect of the initial grain size on the laser beam weldability of CoCrFeMnNi high-entropy alloys (HEAs). Cold-rolled, annealed, and cast HEAs with different initial grain sizes exhibited clear differences in weldability. T...
The friction weldability of Ti-45Al-8.5Nb-0.2W-0.2B-0.02Y alloy has been investigated by optimizing process parameters and analyzing the microstructures and tensile properties of the joints. The as-cast alloy with a nearly lamellar (NL) microstructur...
Gas tungsten arc (GTA) weldability of rolled CoCrFeMnNi high-entropy alloys (HEAs) was conducted using stainless steel (STS) 308L and HEA fillers. Microstructure and mechanical properties of the welds were examined to determine GTA weldability of the...
The use of additive manufacturing for metallic materials presents a wide range of possibilities for industrial applications. The technology offers several advantages, including weight optimisation and the ability to create complex geometries. However...
The article presents tests aimed to verify the possibility of Thermomechanically Controlled Processed (TMCP) steels T-joints laser welding. The 10 mm thick high-yield-point steel S700MC obtained in an industrial manufacturing process was used for tes...
The processes of metal additive manufacturing (AM) are no longer confined to rapid prototyping applications and are seeing increasing use in many fields for the production of tools and finished products. The ability to design parts with practically z...
This work aims at investigating the spot weldability of a new advanced Quenching and Partitioning (Q&P) steel and a Transformation Induced Plasticity (TRIP) steel for automotive applications by evaluating the effects of the main welding parameter...
In this paper the influence of in situ local heat treatment performed by additional stitches on the weldability of high-strength low-alloy (HSLA) S355J2C+N steel was tested. The investigated steel is characterized by high susceptibility to cold crack...
The manufacture of complicated automobile components that are joined by resistance spot welding requires considerable cost and time. The use of additive manufacturing technology to manufacture automobile components helps reduce the overall time consu...
This investigation aimed at evaluating the weldability of a 2.1 GPa-grade hot stamping steel (HSS) containing 0.40 wt.% carbon using laser butt welding. It is shown that the subject HSS can be properly joined by laser welding without welding defects,...
In joining aluminum alloy to galvanized (GI) steel, the huge gap of thermophysical properties, defects by zinc from the steel surface, and formation of excessive brittle Fe-Al intermetallics (IMC) are the main factors that deteriorate the joint quali...
Due to its high thermal conductivity and favorable machinability, molybdenum–rhenium (Mo–Re) alloys have huge prospects in the field of high-temperature heat pipes. However, the weldability of Mo–Re alloys has not yet been systemati...
This research work aims at finding the optimum process parameters for the laser welding of AA7020 aluminium alloys. The use of 7xxx series alloys is limited because of weldability problems, such as hot cracking, porosity, and softening of the fusion...
Thermo-mechanically rolled S460ML steel was chosen for welding in underwater wet welding conditions by covered electrodes. The main aim of this study was to check the weldability for fillet welds in a water environment by controlled thermal severity...
With the need for eco-friendly energy increasing rapidly due to global environmental issues, there is a rapidly increasing demand for liquefied natural gas (LNG). LNG is liquefied at minus 163 degrees Celsius, and its volume decreases to 1/600, givin...
Nickel is used in aerospace, military, energy, and chemical sectors. Commercially pure (CP) Ni, and its alloys, including solid-solution strengthened (SSS), precipitation strengthened (PS), and specialty alloys (SA), are widely utilized, typically at...
The effects of electrode surface roughness and force on the resistance spot weldability and sticking of the electrode during resistance spot welding (RSW) of aluminum 6061-T6 alloy were investigated. RSW was carried out using an as-received electrode...
This article investigates the possibility of applying weldable optic fiber sensors to the corrugated rebar in reinforced concrete structures to detect cracks and measure the deformation of the steel. Arrays have initially been designed comprised of t...
In this study, the effects of electrical characteristics of an inverter combined with main welding parameters on the resistance spot weldability of advanced high strength steels (AHSS) CP1000 is investigated. The main welding parameters, current and...
Polypropylene and PA66 are widely used in our daily life, but they cannot be welded by laser transmission welding (LTW) because of polar differences and poor compatibility. In this paper, grafting modification technology is used to improve the weldin...
In this work, weldability and hot cracking susceptibility of five alloy 718 investment castings in laser beam welding (LBW) were investigated. Influence of chemical composition, with varying Si contents from 0.05 to 0.17 wt %, solidification rate, an...
The battery performance of electric vehicles depends on the density and capacity of the battery; thus, the battery cells must be assembled in as many layers as possible. Electric vehicle batteries are typically composed of several cells which form mo...
The 6005A-T6 alloy had been widely applied in rail transmit industry due to its combination properties of moderate strength, superior resistance to corrosion, and excellent extrusion plasticity. However, few reports were related to the 6005A-T4 alloy...
This work investigates laser weldability between non-ferrous dissimilar metallic materials, specifically the aluminum 6060-T6 alloy and titanium Ti-6Al-4V. These materials are used in several engineering applications, including aerospace. In a simple...
In this work, the friction stir weldability of two structural high-pressure die casting aluminum alloys designed to manufacture thin-walled automotive components is investigated and compared. AlSi10MnMg and AlMg4Fe2 alloys were friction stir welded a...
Nowadays, ultimate tensile strengths above 400 MPa become usual for ductile irons, thus allowing the implementation of new design paradigms. Large concentrations of carbon and other influencing elements can negatively interfere with the welding proce...
High entropy alloys (HEAs) are among of the most promising new metal material groups. The achievable properties can exceed those of common alloys in different ways. Due to the mixture of five or more alloying elements, the variety of high entropy all...
The melt strength of Elium® acrylic resin is an important factor to ensure limited fluid flow during welding. To provide Elium® with a suitable melt strength via a slight crosslink, this study examines the effect of two dimethacrylates, namel...
of 6