The ongoing trend in the development of powerful ultrashort pulse lasers has attracted increasing attention for this technology to be applied in large-scale surface engineering and modern microfabrication. However, the emission of undesired X-ray pho...
An ultrashort-pulse laser inscription of embedded birefringent microelements was performed inside bulk fluorite in pre-filamentation (geometrical focusing) and filamentation regimes as a function of laser wavelength, pulsewidth and energy. The result...
Ultrashort pulse laser processing can result in the secondary generation of unwanted X-rays if a critical laser irradiance of about 1013 W cm−2 is exceeded. Spectral X-ray emissions were investigated during the processing of tungsten and steel...
High density and high quality interconnects are necessary for the preparation of miniaturized and lightweight electronic products. Therefore, small-diameter and high-density through-holes in FPCs (Flexible Printed Circuits) are required. However, the...
Laser micro-machining is a rapidly growing technique to create, manufacture and fabricate microstructures on different materials ranging from metals and ceramics to polymers. Micro- and nano-machining on different materials has been helpful and usefu...
Ferroelectric nanodomains were formed in bulk lithium niobate single crystals near nanostructured microtracks laser-inscribed by 1030-nm 0.3-ps ultrashort laser pulses at variable pulse energies in sub- and weakly filamentary laser nanopatterning reg...
Optical-range bulk diffraction nanogratings were fabricated via challenging direct inscription by ultrashort (femtosecond, fs) laser pulses inside heat-shrinkable polymers (thermoplastics) and VHB 4905 elastomer. The inscribed bulk material modificat...
In this paper, we have demonstrated a dispersion-managed, high-power, Tm-Ho co-doped ultrashort pulse fiber laser using a single walled carbon nanotube (SWNT) dispersed in polyimide film. An in-line type spectral filter was developed to control the o...
The ultrashort-laser photoexcitation and structural modification of buried atomistic optical impurity centers in crystalline diamonds are the key enabling processes in the fabrication of ultrasensitive robust spectroscopic probes of electrical, magne...
For the investigation of processes happening on the time scale of the motion of bound electrons, well-controlled X-ray pulses with durations in the few-femtosecond and even sub-femtosecond range are a necessary prerequisite. Novel free-electron laser...
We report on a comprehensive study of laser percussion microvia drilling of FR-4 printed circuit board material using ultrashort pulse lasers with emission in the green spectral region. Laser pulse durations in the pico- and femtosecond regime, laser...
Ablation of BaWO4 Raman crystals with different impurity concentrations by ultrashort laser pulses was experimentally studied. Laser pulses with duration varying from 0.3 ps to 1.6 ps at wavelengths of 515 nm and 1030 nm were applied. A single-pulse...
The paper is devoted to the investigation of the absorption of ultrashort laser pulses on atoms in plasmas, accounting for the different broadening mechanisms of atomic resonant transitions. The analysis is made in terms of the absorption probability...
In this paper, a non-Fourier heat conduction model of ultra-short pulsed laser ablation of metal is established that takes into account the effect of the heat source, laser heating of the target, the evaporation and phase explosion of target material...
The interaction of ultrashort pulsed laser radiation with intensities of 1013 W cm−2 and above with materials often results in an unexpected high X-ray photon flux. It has been shown so far, on the one hand, that X-ray photon emissions increase propo...
An ultra-fast pulsed laser for materials processing can obtain submicrometer- to nanometer-sized parts or patterns (precision or accuracy) because the heat cannot diffuse in time for an ultra-fast pulsed duration, and this causes a threshold of ablat...
Laser processing with ultra-short double pulses has gained attraction since the beginning of the 2000s. In the last decade, pulse bursts consisting of multiple pulses with a delay of several 10 ns and less found their way into the area of micromachin...
We report on a comprehensive study of laser ablation and micromachining of alumina using a high-power 1030 nm ultrashort-pulsed laser. By varying laser power up to 150 W, pulse duration between 900 fs and 10 ps, repetition rates between 200 kHz and 8...
This article discusses the process of the laser turning of rotational symmetric, cylindrical components using ultrashort laser pulses with respect to the geometrical conditions and the resulting energy distribution during the laser turning process. A...
Selective laser etching is a promising candidate for the mass production of glass interposers. It comprises two steps: local modification by an ultrashort-pulsed laser and chemical etching of the modified volume. According to previous studies, when a...
In this review paper, we describe the current state of the art to stabilize the output radiation of ultrashort-pulse (USP) fiber lasers and analyze passive methods to reduce the magnitude of fluctuations in the amplitude–frequency noise of outp...
Interactions between ultrashort laser pulses with intensities larger than 1013 W/cm2 and solids during material processing can lead to the emission of X-rays with photon energies above 5 keV, causing radiation hazards to operators. A framework for in...
We considered the resonance scattering of ultrashort laser pulses (USLP) on the bound electrons of hydrogen-like ions in a dense plasma. A process description was proposed in terms of full scattering probability during the time of pulse action. Dense...
Diamond is a wide bandgap semiconductor with excellent physical properties which allow it to operate under extreme conditions. However, the technological use of diamond was mostly conceived for the fabrication of ultraviolet, ionizing radiation and n...
Inscription of embedded photoluminescent microbits inside micromechanically positioned bulk natural diamond, LiF and CaF2 crystals was performed in sub-filamentation (geometrical focusing) regime by 525 nm 0.2 ps laser pulses focused by 0.65 NA micro...
The filamentation of focused 300 fs laser pulses with variable polarization azimuth in bulk of synthetic HPHT diamond demonstrates the possibility of polarization-dependent bandgap control for crystal dielectric photoexcitation. This directly affects...
We investigated theoretically the time dependence of ultra-short laser pulse scattering by an atom at the high-frequency limit for the spectral and total probability of the process using new expression which we derived in this paper. We established t...
Reactive multilayer foils (RMFs) for joining processes have attracted a great deal of attention over the last few years. They are capable of exothermic self-propagating reactions and can serve as localized heat sources for joining applications when i...
A direct comparison of simulation and experimental results of UV laser-induced surface nanostructuring of gold is presented. Theoretical simulations and experiments are performed on an identical spatial scale. The experimental results have been obtai...
The role of pre-plasma in the efficient generation of protons by intense laser-matter interaction from structured targets is investigated. Optimal energy coupling between laser and plasma is found by varying the fluence and arrival time of an indepen...
The inscription regimes and formation mechanisms of form-birefringent microstructures inside nano-porous fused silica by tightly focused 1030- and 515-nm ultrashort laser pulses of variable energy levels and pulsewidths in the sub-filamentary regime...
The development of new laser-driven electron linear accelerators, providing unique ultrashort pulsed electron beams (UPEBs) with low repetition rates, opens new opportunities for radiotherapy and new fronts for radiobiological research in general. Co...
The fabrication of stable, tailored domain patterns in ferroelectric crystals has wide applications in optical and electronic industries. All-optical ferroelectric poling by pulse laser irradiation has been developed recently. In this work, we studie...
Comparative study on micro-deep hole drilling by picosecond ultra-short pulse laser in four metals, including copper, aluminum alloy, titanium alloy, and nickel alloy, was presented. Destructive testing was performed to measure the depth, shape, and...
Free electron laser (FEL) is capable of producing ultra-short X-ray pulses. The estimation of X-ray pulse propagation is the key process of X-ray FEL beamline design. By using the Kostenbauder matrix approach, the evolution of an ultra-short pulse in...
In this study, we propose a new sub-diffusion two-temperature model and its accurate numerical method by introducing the Knudsen number (Kn) and two Caputo fractional derivatives (0<α,β<1) in time into the parabolic two-temperature m...
Yb:CALYGLO crystals with a dopant concentration of 5 at.% were successfully grown using the Czochralski method. The crystal samples were extensively studied to analyze their structure, room temperature and low temperature spectra, and laser propertie...
A thin metal film subjected to an ultrashort laser pulse is considered. With a sufficiently high laser intensity the process of the film heating may cause metal melting and even ablation. In this work, the numerical model of the melting and resolidif...
The control of mechanical effects, such as shock waves, induced by ultrashort laser pulses in water is crucial for applications in biomedicine and material processing. However, optimizing these effects requires a detailed understanding of how laser p...
The multi-foci division of through thickness nonlinear pulse energy absorption on ultrashort pulse laser singulation of single side polished sapphire wafers has been investigated. Firstly, it disclosed the enhancement of energy absorption by the tota...
The evolution of laser technologies and the invention of ultrashort laser pulses have resulted in a sharp jump in laser applications in life sciences. Developmental biology is no exception. The unique ability of ultrashort laser pulses to deposit ene...
The effect of the self-separation of a single ultrashort light pulse of a parametric Raman CaMoO4 laser with birefringence phase matching under intracavity synchronous pumping by a mode-locked 1064 nm Nd:YAG laser is experimentally investigated and t...
Besides the need for biomaterial surface modification to improve cellular attachment, laser-structuring is favorable for designing a new surface topography for external bone fixator pins or implants. The principle of this study was to observe how bio...
Although the use of lasers in medical diagnosis and therapies, as well as in fundamental biomedical research is now almost routine, advanced laser sources and new laser-based methods continue to emerge. Due to the unique ability of ultrashort laser p...
Devices that measure the presence of instability in the pulse shapes in trains of ultrashort laser pulses do not exist, so this task necessarily falls to pulse-measurement devices, like Frequency-Resolved Optical Gating (FROG) and its variations, whi...
We present the results of ex vivo exposure by an ultrafast all-fiber Holmium laser system to porcine longissimus muscle tissues. A simple Ho-doped laser system generated ultrashort pulsed radiation with less than 1 ps pulse width and a repetition rat...
We reported on a generation of 27 nm spectral bandwidth, two-port output ultrashort pulses directly from an all-normal-dispersion passively mode-locked Yb-fiber laser. Based on the nonlinear polarization rotation (NPR) mode-locking technique, high pu...
The theoretical analysis of four fundamental laser-assisted non-linear scattering processes are summarized in this review. Our attention is focused on Thomson, Compton, Møller and Mott scattering in the presence of intense electromagnetic radi...
To effectively improve the cutting quality of sapphire and optimize ultrafast picosecond laser cutting technology, this paper presents a new numerical simulation method and an experimental study of the ultrafast double-laser cutting of sapphire mater...
Optically pumped semiconductor disk lasers—known as vertical-external-cavity surface-emitting lasers (VECSELs)—are promising devices for ultrashort pulse formation. For it, a “SESAM-free” approach labeled “self-mode-lock...
of 9