After decades of development of the vanadium titanomagnetite (VTM) ore in the Panzhihua district changes have taken place to the ore characteristics. In addition, preliminary research carried out in this area mainly focused on the separation and extr...
The Baima vanadium titanomagnetite deposit, located in the Panzhihua-Xichang (Panxi) metallogenic belt in China, is one of the super-large deposits in the region. The titanomagnetite upgrading process involves grinding the raw ore followed by magneti...
The current intensive development of steelmaking is being impeded by a scarcity of pure scrap. The potential to replace pure scrap with metallized raw materials that are naturally alloyed with vanadium and titanium, such as annealed unfluxed titanoma...
In this study, the carbothermic reduction and nitridation mechanism of vanadium-bearing titanomagnetite concentrate are investigated in terms of phase transformation, microstructure transformation, and thermodynamic analyses. The differences in the r...
The nucleation and growth of crystals in igneous rocks is usually thought to occur under thermodynamic equilibrium conditions. However, recent studies on igneous textures and mineral compositions have shown that these processes probably occur under t...
In this paper, we study the possibility of obtaining iron and titanium-vanadium concentrates with highest contents of iron and titanium, respectively, through hydrometallurgical processing of the titanomagnetite ores of the Chineisk deposit. We varie...
Titanomagnetite from Fe-Ti-V ores of the Lanjiahuoshan deposit, Panzhihua layered intrusion, Southwest China, was investigated at the nanoscale. The objectives were to establish the composition of exsolution phases and their mutual relationships in o...
The present study explores the production of metallized titanomagnetite briquettes, with a view to addressing two key issues. Firstly, it seeks to address the growing shortage of high-quality iron-bearing raw materials. Secondly, it looks at how to m...
As the potential locations of undiscovered ore deposits become deeper, a technique for predicting promising areas in the subsurface media has become necessary. Geoscience data on a wide range of underground media can be obtained through geophysical f...
In recent years, a low-grade vanadiferous titanomagnetite concentrate (LVTC) produced in the northwest area of Liaoning has attracted more and more attention. However, it is difficult to recover and utilize valuable minerals such as iron, titanium, a...
Vanadium titanomagnetite (VTM) is an important mineral for developing titanium resources, but the comprehensive recovery of ilmenite separation is extremely poor, resulting in the low-efficiency utilization of titanium resources. Here, the separation...
The iron and steel industry is a major CO2 emitter and an important subject for the implementation of carbon emission reduction goals and tasks. Due to the complex ore composition and low iron grade, vanadium–bearing titanomagnetite smelting in...
Ironsand is an abundant and inexpensive magnetic mineral resource. However, the magnetic properties of unprocessed ironsand are often inadequate for any practical applications. In this work, the applicability of ironsand for use as a component in a s...
Low-grade vanadiferous titanomagnetite ore (LVTM) is as an important mineral resource for sintering ore manufacturing. Furthermore, TiO2 has a significant effect on the sintering process of iron ore fines. The effects of TiO2 on the metallurgical pro...
The traditional roasting technique using sodium salts in vanadium production has been disadvantageous due to the large consumption of energy and the emission of harmful gases. A modified process using molten salt roasting and water leaching to extrac...
The Yeoncheon titanomagnetite deposit formed by Precambrian magma differentiation is located in Gyeonggi-do, South Korea. Our team conducted an airborne magnetic survey for multiscale mineral exploration and then selected a promising survey area. An...
The effects of basicity and MgO content on reduction behavior and separation of iron and slag during smelting vanadium titanomagnetite by electric furnace were investigated. The reduction behaviors affect the separation of iron and slag in the direct...
In order to pursue the goal of low-carbon ironmaking, a new type of humic acid (HA)-based binder was applied to the preparation of oxidized pellets from vanadium-bearing titanomagnetite (VTM) in this work. Effects of the HA binder (or with limestone)...
The titanomagnetite of the Lac Doré Complex, an Archean layered intrusion that is located in the Abitibi greenstone belt in Québec (Canada), contains a wide variety of exsolution textures, which are the remnants of a complex cooling his...
Excessive TiO2 in titanomagnetite concentrates (TC) causes unavoidable problems in subsequent smelting. At present, this issue cannot be addressed using traditional mineral processing technology. Herein, a strategy of metallurgy-beneficiation combina...
With a view to satisfying the requirements of environmental protest and efficient usage of resources, a novel process for efficiently extracting vanadium (V), titanium (Ti), and iron (Fe) from vanadium-bearing titanomagnetite concentrate was develope...
Low-temperature oxidation of titanomagnetite in oceanic basalts distorts the primary thermoremanent magnetization (TRM) signal essential for reconstructing Earth’s magnetic field history, though the specific impact of magma intrusion-induced ox...
The titanium-enriched slag was obtained via atmospheric hydrochloric acid leaching of mechanically activated vanadium titanomagnetite concentrates (VTMCs). Under the influence of mechanical activation, specific physicochemical changes were observed v...
In this work, a complete beneficiation technical route combining physical and chemical methods, namely a roasting-flotation-leaching scheme, is proposed to produce a qualified grade Ti-concentrate from altered Vanadium titanomagnetite (VTM) ore. Base...
Carbothermic reduction–magnetic separation and acid leaching processes were used to produce TiN and direct reduced iron (DRI) from titanomagnetite concentrates. The effects of sodium borate on the reduction behavior of TMCs, the magnetic separa...
A novel process for preparing direct reduction iron (DRI) and titanium nitride (TiN) from Panzhihua titanomagnetite concentrate is proposed. This process involves pelletizing, direct reduction roasting and magnetic separation. The effects of reductio...
Through thermodynamic smelting experiments, nonisothermal and isothermal kinetics experiments, the effects of CO2–containing gas injection on the smelting of chromia–bearing vanadiferous titanomagnetite ore were investigated. The experiments at 900 °...
This study discusses the oxidation induration and swelling behavior of chromium-bearing vanadium titanomagnetite pellets (CVTP) with Co2O3 additions. The reduction swelling index (RSI) and compressive strength of reduced CVTP (CSRC) were investigated...
Blast furnace–basic oxygen furnace (BF–BOF) process is the predominant method for smelting vanadium titano-magnetite (VTM) in China. Hydrogen-rich (H2-rich) gas injection in BF is considered as an important way to reduce CO2 emission under the backgr...
Vanadium titano-magnetite (VTM) is a significant resource in China—analysis shows that China possesses approximately 10 billion tons of VTM. In this study, we characterize VTM’s isothermal reduction mechanisms in the mixture of H2, CO, an...
Vanadium titanomagnetite is an important mineral resource. It is a raw material for ironmaking, vanadium extraction, strategic metal titanium production, and titanium dioxide production. In this study, high chromium vanadium titanomagnetite (High-Cr...
The influence of fuel level on Russian vanadiferous titanomagnetite sinter properties, productivity, and mineralogy are researched by sintering pot testing, metallographic microscopy, scanning electron microscopy analysis, and energy dispersive spect...
Titanium-bearing electric furnace slag (TEFS) was prepared from vanadium titanomagnetite and leached with sulfuric acid. The Ti leaching rate of vanadium titanomagnetite TEFS is significantly lower than that of ilmenite TEFS. The impurity content in...
Precambrian igneous rocks (851–873 Ma) occur in Pocheon City, Korea. These rocks—crystallized during magmatic differentiation—formed vanadiferous titanomagnetite (VTM) deposit. Vanadium is a crucial element in vanadium redox flow batteries that are m...
Vanadium is a strategic metal with critical applications in steel alloys, aerospace, chemical catalysis, and energy storage. However, conventional extraction methods such as high-temperature salt roasting are energy-intensive and environmentally chal...
In this study, there is 1.42% P2O5 in the P-containing V-Ti magnetite tailings in Miyi Region of China, with the valuable minerals mainly including apatite, and aluminosilicate minerals as the main gangue components. The direction flotation process w...
Phase transitions of Mg2TiO4 and Fe2TiO4 were examined up to 28 GPa and 1600 °C using a multianvil apparatus. The quenched samples were examined by powder X-ray diffraction. With increasing pressure at high temperature, spinel-type Mg2TiO4 decomp...
The Kovdor phoscorite-carbonatite ore-pipe rocks form a natural series, where apatite and magnetite first gradually increase due to the presence of earlier crystallizing forsterite in the pipe marginal zone and then decrease as a result of carbonate...
Compared with vanadium extraction by sodium roasting followed by water leaching, the calcification roasting–sulfuric acid leaching method is considered a promising approach for the comprehensive utilization of vanadium titanomagnetite, as it av...
HIsmelt is well suited for smelting vanadium–titanium magnetite due to its flexibility in feedstock selection and tolerance to high viscosity slag, compared with the blast furnace. In this work, the effect of smelting time on the distribution b...
This study investigated the production of hydrogen-rich syngas from renewable sources using durable and efficient catalysts. Specifically, the research focused on steam methane reforming (SRM) and dry methane reforming (DRM) of simulated producer gas...
The preparation of highly pure vanadyl sulfate from sulfate solutions containing impurities of iron and aluminumwas investigated by solvent extraction with 2-ethylhexyl phosphoric acid mono-2-ethylhexyl ester (EHEHPA) and tri-n-butyl phosphate (TBP)...
The fusion method of using ammonium phosphate salt as flux was assessed for its ability to precipitate metaphosphate compounds containing trivalent ions M3+ = Al, Cr, Fe, Ti, and V as M(PO3)3 in inorganic salts and a certified reference material (CRM...
Magmatic processes dominate Fe–Ti–V mineralization and revealing these processes is essential for providing a scientific foundation for exploration models. This study focuses on the metamorphosed Neoarchean (ca. 2728 Ma) tholeiitic layere...
The magnetic susceptibility measured in an alternating field is made up of in-phase and out-of-phase components. The in-phase Anisotropy of Magnetic Susceptibility (ipAMS) measures the bulk response of all minerals in a sample; however, out-of-phase...
Sapphires from alluvial deposits associated with Cenozoic basalts in Southern Vietnam were collected for investigation of mineral inclusions. In this report, primary iron oxide inclusions were focused on, with detailed mineral chemistry using a Raman...
The Early Ordovician Manteigas granodiorite has been characterized as having a magnetic susceptibility with high heterogeneity and values compatible with the presence of ferromagnetic phases, such as magnetite. However, granitoids with magnetite are...
Hydrogen-based reduction followed by the electric furnace smelting of vanadium–titanium magnetite pellets offers notable advantages, including high reduction efficiency, reduced energy consumption, lower CO2 emissions, and improved titanium rec...
The Neoproterozoic pyroxene gabbros and gabbronorites in the El-Baroud mafic intrusion in the Northern Eastern Desert (NED) of Egypt host Fe-Ti oxide ore deposits. This study discusses the major and trace elements of both titaniferous iron ores and t...
Lava has complex geochemical characteristics based on differences in eruption centers, eruptive events, and flow emplacement. Characterization of lava is useful for understanding the geological conditions of a volcanic region. To complement geochemic...
of 2