Methanol steam reforming (MSR) is considered an effective method for hydrogen storage and to generate high-quality hydrogen for fuel cells. In this work, a comprehensive investigation of the methanol steam reforming process using a bimetallic Pt&ndas...
Aluminum doped titania samples were synthesized as supports of copper oxide catalysts for NO reduction with ammonia. Samples were prepared by the sol-gel method with various ratios of aluminum to titanium. Their thermal stability was examined by TG/D...
Titania photocatalysts supported on mesoporous MgO carriers doped with Mo(VI) ions were prepared and characterized by XRD, BET nitrogen adsorption, FT-IR, and EPR methods. The photocatalytic activity was evaluated by bleaching an aqueous dye solution...
Activities during ethylene/1-hexene copolymerization were found to increaseusing the mixed titania/silica-supported MAO with rac-Et[Ind]2ZrCl2 metallocenecatalyst. Energy Dispersive X-ray spectorcopy (EDX) indicated that the titania wasapparently loc...
This study investigates the significant impact of metal–support interactions on catalytic reaction mechanisms at the interface of oxide-supported metal nanoparticles. The distinct and contrasting effects of SiO2 and TiO2 supports on reaction dy...
Ir-based catalysts are the best in terms of activity and stability for oxygen evolution reactions (OERs) in proton exchange water electrolysis. Due to their cost, efforts have been made to decrease their load without a loss of activity. In this paper...
The control of catalytic performance using synthesis conditions is one of the main goals of catalytic research. Two series of Pt-Ti/SBA-15 catalysts with different TiO2 percentages (n = 1, 5, 10, 30 wt.%) were obtained from tetrabutylorthotitanate (T...
Silica, titania, and mixed silica–titania powders have been used as supports for loading 5 wt% Cu, 5 wt% Ag, and 2.5 wt% Cu-2.5 wt% Ag with the aim of providing a series of nanomaterials with antifouling properties. All the solids were easily p...
Glycerol aqueous phase reforming (APR) produces hydrogen and interesting compounds at relatively mild temperatures. Among APR catalysts investigated in literature, little attention has been given to Pt supported on TiO2. Therefore, herein we propose...
The photocatalytic degradation of methylene blue (MB) dye has been performed under UV irradiation in aqueous suspension, employing photocatalysts based on Au (1.5 wt %) and AuCu (Au/Cu = 1, 2.0 wt %), and supported on SBA-15-ordered mesoporous silica...
The search for alternative sources of, and substitutes for, chemicals derived from fossil-based feedstocks encourages studies of heterogeneous catalysts to increase the feasibility of sustainable production of biomass derivatives, such as γ-val...
In the present paper, we compare the activity, selectivity, and stability of a supported nickel catalyst in classical heating conditions and in magnetically activated catalysis by using iron wool as a heating agent. The catalyst, 5 wt% Ni supported o...
The reaction of octakis(3-chloropropyl)octasilsesquioxane with four equivalents of 1-hexylimidazole or 1-decylimidazole gave two products labelled as HQ-POSS (hexyl-imidazolium quaternized POSS) and DQ-POSS (decyl-imidazolium quaternized POSS) as reg...
The application of nanoparticles has experienced a vertiginous growth, but their interaction with food and medicinal plants in organisms, especially in the control of reproduction, remains unresolved. We examined the influence of copper nanoparticles...
Here we report the optimization of the fabrication conditions for AuNi bimetallic catalysts supported on self-ordered titania nanotube arrays (AuNi-TiO2ntb). A series of efficient AuNi-TiO2ntb catalysts with small amounts of Au in the range of 1.74 t...
Catalytic performance and moisture and sulfur dioxide resistance are important for a catalyst used for the oxidation of volatile organic compounds (VOCs). Supported noble metals are active for VOC oxidation, but they are easily deactivated by water a...
Vanadium oxide (V2O5) species has been supported on different porous clay heterostructures (with silica pillars, silica-zirconia with a molar ratio Si/Zr = 5 and silica-titania with a molar ratio Si/Ti = 5) by wetness incipient method. All catalysts...
The mild hydrotreatment of a model mixture of tar-type compounds (i.e., naphthalene, 1-methylnaphthalene, acenaphthylene, and phenanthrene) to produce partially hydrogenated products in the range of C9–C15 was studied over Pd supported on TiO2 posses...
We present a novel approach for the preparation of polymer-TiO2 composite microgels. These microgels were prepared by the in situ hydrolysis and condensation of titanium tetrabutoxide (TBOT) in a mixed ethanol/acetonitrile solvent system, using poly(...
Vanadia/titania catalysts were synthesized by the equilibrium deposition filtration (EDF) method, which is a synthesis route that follows a molecular-level approach. The type of interfacial deposition as well as the interfacial speciation of the depo...
Titania photocatalysts have been intensively examined for both mechanism study and possible commercial applications for more than 30 years. Although various reports have already been published on titania, including comprehensive review papers, the mo...
The azo dye Basic Blue 41 was subjected to photocatalytic and photoelectrocatalytic degradation using nanopararticulate titania films deposited on either glass slides or Fluorine doped Tin Oxide (FTO) transparent electrodes. The degradation was carri...
Nanostructured titania (TiO2) is the most widely applied semiconducting oxide for a variety of purposes, and it is found in many commercial products. The vast majority of uses rely on its photo-activity, which, upon light irradiation, results in exci...
The present work reports the synthesis of efficient Ti–Au/zeolite Y photocatalysts by different processing of aluminosilicate gel and studies the effect of titania content on the structural, morphological, textural, and optical properties of th...
In this work, formulations of “environmentally compatible” silicone-based antifouling, synthesized in the laboratory and based on copper and silver on silica/titania oxides, have been characterized. These formulations are capable of repla...
In this work, high surface area mono- and binary oxide materials based on zirconia and titania synthetized via the alginate route were applied as supports of ruthenium catalysts used in levulinic acid hydrogenation towards γ–valerolactone...
A titanate nanotube catalyst for ozonation was synthesized with a simple one-step NaOH hydrothermal treatment without energy-consuming calcination. The synthesized titania catalysts were characterized by X-ray diffraction (XRD), Raman, porosimetry an...
In this work, SBA-15 silica and silica-titania have been used as supports for photocatalysts based on AuCu alloy (Au:Cu = 1) to be used in the preferential oxidation of CO (CO-PROX) in excess of hydrogen at room temperature and atmospheric pressure b...
Heterostructured bilayer films, consisting of co-assembled TiO2 photonic crystals as the bottom layer and a highly performing mesoporous P25 titania as the top layer decorated with CoOx nanoclusters, are demonstrated as highly efficient visible-light...
TiO2 photocatalysis is considered as an alternative to conventional disinfection processes for the inactivation of waterborne microorganisms. The efficiency of photocatalysis is limited by charge carrier recombination rates. When the photocatalyst is...
A simple, inexpensive, and novel method was used to prepare electrocatalysts from Cu supported on titanium dioxide (Cu/TiO2). XRD, SEM, and TEM characterizations confirmed different loadings of Cu nanoparticles (NPs) on TiO2. Cyclic voltammetry tests...
A raspberry-like SiO2@TiO2 new material supported on functionalized graphene oxide was prepared to reduce titania’s band gap value. The material was characterized through different analytical methods such as Fourier transform infrared spectrosc...
Surface Enhanced on Infrared Absorption (SEIRAS) and Raman Spectroscopy (SERS) are nondestructive analytic techniques used to detect low concentrations and recognize the fingerprints of molecules. The recognition of the absorption from samples by con...
Photocatalysis has been considered an effective method for environmental purification and pollutant removal, with many experiments having being performed. The sustainable development of environmentally friendly materials that can photocatalytically o...
This paper remarks the general correlations of the shape and crystallinity of titanium dioxide (TiO2) support on gold deposition and carbon monoxide (CO) oxidation. It was found that due to the larger rutile TiO2 particles and thus the pore volume, t...
The continuous increase in scientific reports concerning photocatalysis and in particular CO2 photoreduction in recent years reveals the high degree of interest around the topic. However, the adsorption and activation mechanisms of CO2 on TiO2, the m...
In this work, the activity of bimetallic Pd-Au doped hierarchically structured titania catalysts has been investigated in the total oxidation of toluene. In earlier works, doping titania with group Vb metal oxides ensured an increased catalytic perfo...
In this paper, nanowire-supported catalysts loaded with nickel are shown to be coke resistant compared to nanoparticle-supported catalysts. Specifically, Ni-loaded titania-based nanowire catalysts were tested with the dry methane reforming process in...
Modified titania photocatalysts were synthesized by the pressure method using titanium(IV) oxide from Grupa Azoty Zakłady Chemiczne “Police” S.A., Police, Poland, and d-glucose solution. Characterization of obtained composites was perform...
Hollow mesoporous hydroxyapatite (HM-HAP) composites coated with titania are prepared to increase the stability and catalytic performance of titania for azo dyes present in the wastewater system. In this work, HM-HAP particles were first synthesized...
Mesoporous titania nanoparticles (NPs) can be used for encapsulation polyphenols, with applications in the food industry, cosmetics, or biomedicine. TiO2 NPs were synthesized using the sol-gel method combined with solvothermal treatment. TiO2 NPs wer...
The accurate determination of the local temperature is one of the most important challenges in the field of nanotechnology and nanomedicine. For this purpose, different techniques and materials have been extensively studied in order to identify both...
In this study, the temperature-dependent activity of Au/AC nanocatalysts in redox catalytic reactions was investigated. To this end, a series of colloidal gold catalysts supported on activated carbon and titania were prepared by the sol immobilizatio...
To improve phytochemical stability, polyphenolic extracts prepared from Salvia officinalis L., which is a valuable source of phytocompounds with health benefits, were embedded into mesopores of silica, titania, or titania-ceria materials. Ethanolic a...
Photoassisted synthesis is as a highly appealing green procedure for controlled decoration of semiconductor catalysts with co-catalyst nanoparticles, which can be carried out without the concourse of elevated temperatures, external chemical reducing...
This study presents an experimental overview for the development of photocatalytic materials based on geopolymer binders as catalyst support matrices. Particularly, geopolymer matrices obtained from different solid precursors (fly ash and metakaolin)...
The mode of operation of titania-supported vanadia (VOx) catalysts for NOx abatement using ammonia selective catalytic reduction (NH3-SCR) is still vigorously debated. We introduce a new high surface area VOx/TiO2/SBA-15 model catalyst system based o...
Composite materials based on titania nanoparticles (TiO2 NPs) and three metal-organic frameworks (MOFs) called MIL-53 (Fe) ((Fe (III) (OH) (1,4-BDC)), MILs (Materials Institute Lavoisier)), MIL-100 (Fe) (Fe3O(H2O)2OH(BTC)2), and Fe-BTC (iron-benzenet...
Rh is one of the most effective metals in several technologically important heterogeneous catalytic reactions, like the hydrogenation of CO2, and CO, the CO+H2O reaction, and methane and ethanol transformations. Titania and titanates are among the mo...
The increasing need for novel bone replacement materials has been driving numerous studies on modifying their surface to stimulate osteogenic cells expansion and to accelerate bone tissue regeneration. The goal of the presented study was to optimize...
of 3