The thermo-optic effect is a crucial driving mechanism for optical devices. The application of the thermo-optic effect in integrated photonics has received extensive investigation, with continuous progress in the performance and fabrication processes...
Glass microresonators with whispering gallery modes (WGMs) have a lot of diversified applications, including applications for sensing based on thermo-optical effects. Chalcogenide glass microresonators have a noticeably higher temperature sensitivity...
The engineering of thermo-optic effects has found broad applications in integrated photonic devices, facilitating efficient light manipulation to achieve various functionalities. Here, we perform both an experimental characterization and a theoretica...
In this paper, a thermo-optic tuning optical waveguide sensor system based on a cascaded double micro-ring resonator is investigated. The system consists of a micro-ring resonator with the microheater as a reference ring and a micro-ring resonator wi...
Optical phase control is essential for optical beam steering applications. The silicon nitride thermo-optic modulator generally suffers from high electrical power consumption. Microresonator and multipass structures could reduce the electrical power...
Tunable photonic devices are increasingly pivotal in modern optical systems, enabling the dynamic control over light propagation, modulation, and filtering. This review systematically explores two prominent classes of materials, thermo-optic and elec...
This paper presents a thorough analysis on the temperature dependence of the thermo-optic coefficient, dn/dT, of four bulk annealed pure-silica glass samples (type I—natural quartz: Infrasil 301; type II—quartz crystal powder: Heraeus Hom...
Thermo-optical switches are of particular significance in communications networks where increasingly high switching speeds are required. Phase change materials (PCMs), in particular those based on paraffin wax, provide wealth of exciting applications...
The use of integrated heaters is widespread in silicon photonics for waveguide temperature control. The dynamical behavior of the heaters is important for determining their usefulness for certain applications. There exists ambiguity in the literature...
Fiber optics sensors based on multimodal interference (MMI) have proven effective for refractometry of liquid samples. Here, we extend these capabilities to demonstrate that aqueous solutions with a similar refractive index (RI), which at room temper...
We investigate the optical and thermo-optical properties of amorphous TiO\(_2\)–Al\(_2\)O\(_3\) thin-film bilayers fabricated by atomic layer deposition (ALD). Seven samples of TiO\(_2\)–Al\(_2\)O\(_3\) bilayers are fabricated by growing Al\(_2\)O\(_...
The paper investigates the effect of thermo-optic switching resulting from the hybrid combination of a tapered optical fiber (TOF) with alkanes doped with nanoparticles of zinc sulfide doped with manganese (ZnS:Mn NP). Presented measurements focused...
In this work, the thermo-optic effect in polymers was used to realize a temperature-tunable whispering-gallery-mode laser. The laser was fabricated using a capillary tube filled with a light-emitting conjugated polymer solution via the capillary effe...
In this paper, we investigated the optical and thermo-optical properties of a-SiNx:H layers obtained using the PECVD technique. SiNx:H layers with different refractive indices were obtained from silane and ammonia as precursor gases. Surface morpholo...
The investigation of optical microcavity solitons is in demand both for applications and basic science. Despite the tremendous progress in the study of microresonator solitons, there is still no complete understanding of all features of their nonline...
In this paper we derived an expression that allows the determination of the thermo-optic coefficient of weakly-guiding germanium-doped silica fibers, based on the thermal behavior of optical fiber devices, such as, fiber Bragg gratings (FBGs). The ca...
The mid-infrared (MIR, 2–20 μm) waveband is of great interest for integrated photonics in many applications such as on-chip spectroscopic chemical sensing, and optical communication. Thermo-optic switches are essential to large-scale integra...
Conventional thermo-optic devices—which can be broadly categorized to that with and without a thermal isolation trench—typically come with a tradeoff between thermal tuning efficiency and tuning speed. Here, we propose a method that allows us to dire...
Taking advantage of the large thermo-optical coefficient of polymer materials, a hybrid-integrated thermo-optic switch was designed and simulated. It is also compatible with the existing silica-based planar light-wave circuit (PLC) platform. To furth...
A function-versatile thermo-optic switch is proposed and experimentally demonstrated using silicon nitride waveguides embedded in polymer cladding. The device consists of a 1 × 2 input splitter, 2 single-mode waveguides for phase shifting, and...
To compensate for the temperature dependency of a standard FBG, a cladding-etched FBG immersed with a liquid mixture having a negative thermo-optic coefficient is presented, and its characteristics are investigated. The Bragg wavelength of the claddi...
Employing several nematic liquid crystal mixtures, we investigate how the thermo-optic response of nonlinear birefringent soft-matter affects the propagation of light beams and the features of self-induced waveguides. We address the formation of opti...
A gain slab configuration with a low thermally induced wavefront distortion, which is based on heating the edge by the cladding layer, is proposed. The gain slab will be applied to a helium-cooled Nd: glass multislab laser amplifier with an output of...
SU-8 is an emerging polymer material for integrated optical circuits that has demonstrated good structural properties in a cryogenic environment. In this article, we investigate the thermo-optical properties of SU-8 for a wavelength λ=850 ...
This paper reports on the new Sellmeier and thermo-optic dispersion formulas that provide a good reproduction of the temperature-dependent phase-matching conditions for second-harmonic generation (SHG) and sum-frequency generation (SFG) of a CO2 lase...
For the silicon optical computing chip, the optical convolution unit based on the micro-ring modulator has been demonstrated to have high integration and large computing density. To further reduce power consumption, a novel, simple Fano resonant ther...
In this paper, a hybrid sensor was fabricated using a IR-femtosecond laser to measure the thermal expansion and thermo-optical coefficient of silica-based fiber Bragg gratings (FBGs). The hybrid sensor was composed of an inline fiber Fabry-Perot inte...
Delivery systems with a solid dispersed phase can be produced in a melt emulsification process. For this, dispersed particles are melted, disrupted, and crystallized in a liquid continuous phase (melt emulsification). Different to bulk crystallizatio...
In the current energy transition procedure, the application prospect of hydrogen as a clean energy material has attracted much attention. However, the widespread use of hydrogen is also accompanied by safety hazards, and how to detect hydrogen safely...
Optical power switches are essential components in fiber optic communication systems, requiring minimal losses, a broad operating wavelength range, and high tolerance to fabrication errors for optimal performance. Adiabatic optical power switches inh...
In this paper, the temperature-dependent dielectric properties of vanadium-sesquioxide-based thin films are studied to assess their suitability for thermally tunable filters at optical communication wavelengths. Spectroscopic ellipsometry is utilized...
Strong thermo-optic effect of polymers is useful for fabricating tunable phase-delay devices with low power consumption and wide tuning range. However, if the temperature change is increased to extend the tuning range, an attenuation of the guided li...
A novel micron-range displacement sensor based on a whispering-gallery mode (WGM) microcapillary resonator filled with a nematic liquid crystal (LC) and a magnetic nanoparticle- coated fiber half-taper is proposed and experimentally demonstrated. In...
12 December 2024
A silica waveguide thermo-optic mode switch with small radius bimodal S-bends is demonstrated in this study. The cascaded multimode interference coupler is adopted to implement the E11 and E21 mode selective output. The beam propagation method is use...
The generation of coherent light based on inelastic stimulated Raman scattering in photonic microresonators has been attracting great interest in recent years. Tellurite glasses are promising materials for such microdevices since they have large Rama...
A linearized wavelength-swept thermo-optic laser chip was applied to demonstrate a fiber Bragg grating (FBG) sensor interrogation system. A broad tuning range of 11.8 nm was periodically obtained from the laser chip for a sweep rate of 16 Hz. To meas...
Photoluminescent (PL) layers and electroluminescent (EL) systems have gained significant attention for their applications in constructing flat panels, screen monitors, and lighting systems. In this study, we present a groundbreaking approach to fabri...
In this paper, we present a systematic design for manufacturing analysis for thermo-optic phase tuners, framed within the process modules available on a silicon nitride platform. Departing from an established technology platform, the heat distributio...
The configuration designs of the laser diode (LD) side-pumping laser rods focus on how to solve the space conflict between the pump and heat-removal devices because both want to use the larger lateral surface of the laser rod. The conflict is better...
This paper presents a novel method based on a dual-cavity fiber Fabry–Pérot interferometer (DCFFPI) for simultaneously measuring the thermo-optic coefficient (TOC) and thermal expansion coefficient (TEC) of a polymer. The polymer is, by...
Photonic integrated circuits (PICs) are crucial for advanced applications in telecommunications, quantum computing, and biomedical fields. Silicon nitride (SiN)-based platforms are promising for PICs due to their transparency, low optical loss, and t...
Submicron long focusing range beams are gaining attention due to their potential applications, such as in optical manipulation, high-resolution lithography and microscopy. Here, we report on the theoretical and experimental characterization of an ela...
In this paper, we report the numerical calculations for a thermo-optical model and the temperature sensitivity of a fiber Bragg grating (FBG) sensor. The thermally-induced behaviors of a FBG sensor in the gas nitriding process were analyzed for tempe...
Ellipsometry is widely used to determine the thermo-optical properties of thin polymer films. However, if the thermo-optic coefficient (TOC) and the linear thermal expansion coefficient (LTEC) are to be used to determine the temperature coefficient o...
In this work we explore the negative thermo-optic properties of liquid crystal claddings for passive temperature stabilization of silicon photonic integrated circuits. Photonic circuits are playing an increasing role in communications and computing,...
Due to the ability of optical modulators to achieve rapid modulation of optical signals, meeting the demands of high-speed data transmission, modulators based on different novel nanomaterials have become one of the research hotspots over the past dac...
A combination of acrylate formulations and SiO2 nanoparticles is investigated with the aim to improve the optical properties of low-refractive index polymers that are used for the fabrication of planar optical waveguides. A decrease in refractive ind...
The main purpose of this work is to show the thermal dependence of the refractive and extinction indices of conjugated polymer films used in optoelectronics devices. Herein, we present the results of optical investigations performed for the following...
In this paper, a high sensitivity fiber temperature sensor based on surface plasmon resonance is designed and studied. In the simulation, the single mode fiber is polished to remove most of the cladding, and then gold and silver films are added. Fina...
This paper reports design of a 2 × 4 hybrid multimode interferometer-Mach-zehnder interferometer (MMI-MZI) configuration consiting of compact thermo-optical switches on the silicon-on-insulator (SOI) platform. The device consists of two identic...
of 9