This work investigated the microstructure and mechanical property of high-boron multi-component alloy with Fe, B, C, Cr, Mo, Al, Si, V, Mn and different contents of Ti. The results indicate that the as-cast metallurgical microstructure of high-boron...
In this work, the microstructure, alloying element distribution, and borocarbide mechanical properties of high-boron multi-component alloy with Fe-2.0 wt.%B-0.4 wt.%C-6.0 wt.%Cr-x wt.%Mo-1.0%Al-1.0 wt.%Si-1.0 wt.%V-0.5 wt.%Mn (x = 0.0, 2.0, 4.0, 6.0,...
The FeNiCrAlCoCuTi alloy system has great advantages in mechanical properties such as high hardness and toughness. It has high performance potential and research value and the key in research is designing alloy compositions with target properties. Th...
Recently, the irradiation behaviors of multi-component alloys have stimulated an increasing interest due to their ability to suppress the growth of irradiation defects, though the mostly studied alloys are limited to face centered cubic (fcc) structu...
The work was devoted to the study of the effectiveness of the application of multi-component coatings, TiN–Al/TiN, TiN–AlTiN/SiN, and CrTiN–AlTiN–AlTiCrN/SiN, obtained by cathodic arc deposition to increase the wear resistance of 6WH10F carbide end m...
Ethylene glycol oxidation (EGOR) transforms waste plastic-derived chemicals into high-value products, representing an upcycling strategy that enhances resource efficiency. Pt-based electrocatalysts have shown promise for oxidizing ethylene glycol (EG...
Al–Si–Cu–Mg cast aluminum alloys have important applications in automobile lightweight due to their advantages such as high strength-to-weight ratio, good heat resistance and excellent casting performance. With the increasing demand...
This paper is devoted to the evaluation of the “three-body-abrasion” wear behaviour of (wt.%) 5W–5Mo–5V–10Cr-2.5Ti-Fe (balance) multi-component (C + B)-added alloys in the as-cast condition. The carbon (0.3 wt.%, 0.7 wt....
In this work, composites based on a hydride-forming fiber of a multi-principal-component (MPC) Ti20Zr20Nb20V20Hf20 alloy, carbosil, dicumylperoxide and nitrile butadiene rubber (NBR) matrix were obtained. The composites were prepared in a three-stage...
In this paper high-temperature shape memory alloys based on TiPd and TiPt are reviewed. The effect of the alloying elements in ternary TiPd and TiPt alloys on phase transformation and strain recovery is also discussed. Generally, the addition of allo...
Motivated by the fast development of various additive manufacturing technologies, we consider a mathematical model of re-solidification of multicomponent metal alloys, which takes place after ultrashort (femtosecond) pulse laser melting of a metal su...
This paper describes some underlying principles of multicomponent and high entropy alloys, and gives some examples of these materials. Different types of multicomponent alloy and different methods of accessing multicomponent phase space are discusse...
In this work, a new multi-component (CrFeMoNbZr)Ox system was developed. The thin films presented dual-phase amorphous structures, comprising a dominant amorphous alloy phase and a small amount of an amorphous oxide phase. The thin films showed highe...
In this study multi-component (AlCrTaTiZr)NxSiy high-entropy coatings were developed by co-sputtering of AlCrTaTiZr alloy and Si in an Ar/N2 mixed atmosphere with the application of different substrate biases and Si-target powers. Their nanomechanica...
Ferrosilicon (FeSi) is a commercially important material with multiple uses in metallurgical processes. Recently, in an attempt to reduce the carbon impact of the FeSi production process, researchers have proposed using recycled Si recovered from ele...
Experimental and phase field studies of age hardening response of a high purity Al-4Cu-1Li-0.25Mn-alloy (mass %) during isothermal aging are conducted. In the experiments, two hardening phases are identified: the tetragonal θ′ (Al2Cu) phase and the h...
AlCrFeNi multi-component alloys with excellent mechanical properties have been designed and extensively investigated in recent years. The massive fabrication of sheets will be an effective way for industrial application, where hot rolling is the inev...
We have prepared a multi-component nanoporous PtRuCuW (np-PtRuCuW) electrocatalyst via a combined chemical dealloying and mechanical alloying process. The X-ray diffraction (XRD), transmission electron microscopy (TEM) and electrochemical measuremen...
The thermal fatigue behavior of multicomponent Al-7Si-0.3Mg alloys in four different treatment states at typical temperature amplitudes 20 °C→350 °C was studied. The morphology of the second phase particles and crack propagation, and dis...
Local chemical heterogeneity of highly-concentrated multicomponent alloys has drawn much attention as it can produce novel material behaviors and remarkable properties. In Au-Ag-Cu-based multicomponent alloys, phase separation and ordering have long...
Titanium alloy is an important material for the manufacture of key components of deep-sea submersibles. High-power vacuum laser welding is an important method for welding TC4 thick plate (40–120 mm) structures. However, due to the low melting p...
A magnesium-based multi-component alloy (MCA), Mg70Al18Zn6Ca4Y2, was successfully synthesized using the Turning-Induced Deformation (TID) method, with promising improvements in multiple properties such as damping capabilities, hardness (11% to 34% in...
This paper presents and demonstrates the development of a new lightweight coating for aluminum alloy from a novel multicomponent alloy based on the AlSiMgCu system. The coating was applied using a newly designed approach that combined high velocity o...
High entropy alloys present many promising properties, such as high hardness or thermal stability, and can be candidates for many applications. Powder metallurgy techniques enable the production of bulk alloys with fine microstructures. This study ai...
The paper presents the microstructure and corrosion behavior of an AlTiNiCuAgSn new equiatomic multicomponent alloy. The alloy was obtained using the vacuum arc remelting (VAR) technique in MRF-ABJ900 equipment. The microstructural analysis was perfo...
The exceptional mechanical properties of Ni-based high entropy alloys are due to the presence of ordered L12 (γ′) precipitates embedded within a disordered matrix phase. While the strengthening contribution of the γ′ phase is...
Magnesium-based multicomponent alloys with different compositions, namely Mg60Al20Zn5Cu10Mn5 (Mg60 alloy), Mg70Al15Zn5Cu5Mn5 (Mg70 alloy), and Mg80Al5Cu5Mn5Zn5 (Mg 80) alloys, were prepared using the disintegrated melt deposition technique. The DMD t...
In this work, a series of multicomponent alloys (CoCrFeNi, CoCrNi, and CoNiV) were laser welded with 304 stainless steel (304ss), and detailed comparisons on microstructural characteristics and mechanical properties were conducted for dissimilar lase...
High-entropy/multicomponent alloy (HEA/MCA) has received significant research attention in the last decade. There is a dearth of data-driven works dedicated to assessing and visualizing the HEA/MCA literature from a global perspective. To this end, w...
Newly designed multicomponent light alloys are giving rise to non-conventional microstructures that need to be thoroughly studied before determining their potential applications. In this study, the novel Al58Zn28Si8Mg6 alloy, previously studied with...
There is growing emphasis on lightweight and energy-efficient metallic materials, with multicomponent alloying (MCA) being one strategy to achieve this. This was combined with the inherently lightweight magnesium (Mg) as the base metal. Two Mg-based...
Melting, solidification, and viscosity properties of multicomponent Fe-Cu-Nb-Mo-Si-B alloys with low aluminum addition (up to 0.42 at.% Al) were studied using an oscillating cup viscometer. It is shown that melting and solidification are divided into...
With the growth of the automobile, machinery, and aerospace industries, demand for high-performance surface coatings having multifunctional characteristics for use in mechanical parts is increasing. In this study, ternary/quaternary Mo–Cu&ndash...
It has been 14 years since the discovery of the high-entropy alloys (HEAs), an idea of alloying which has reinvigorated materials scientists to explore unconventional alloy compositions and multicomponent alloy systems. Many authors have referred to...
Multicomponent alloys have attained general interest in recent years due to their remarkable performance. Non-equiatomic alloys with boron addition as an interstitial element are being studied, exhibiting outstanding mechanical properties. In order t...
Recently, the development of β-titanium (Ti) alloys with a low Young’s modulus as human implants has been the trend of research in biomedical materials. However, designing β-titanium alloys by conventional experimental methods is too...
To fully understand the impact of cyclic heating on the solid-state phase transformation behavior (SPTB) of multi-component multi-phase alloys (MCPA) during selective laser melting (SLM) and to provide possibilities for the precise customization of t...
For the first time, multicomponent alloys belonging to a B2-ordered single phase were designed and fabricated by melting route. The design concept of high entropy alloys is applied to engineering the transition metal sublattice of binary B2 aluminide...
Understanding the liquid phases and solidification behaviors of multicomponent alloy systems becomes difficult as modern engineering alloys grow more complex, especially with the discovery of high-entropy alloys (HEAs) in 2004. Information about thei...
High-entropy and multicomponent alloys are believed to offer opportunities for improved properties and are currently of great interest to the research community. Studies on these materials are largely conducted on small samples, but, for many practic...
As an attractive high-entropy alloy, AlCrCoNiCu high-entropy alloy has excellent corrosion resistance, wear resistance, and anti-bacterial capabilities, and is considered to be a potential substitute material for marine and nuclear industry materials...
Presented work was focused on obtaining new, up to our knowledge, non-described previously in the literature high entropy Co15Cr15Mo25Si15Y15Zr15 alloy to fill in the knowledge gap about the six-elemental alloys located in the adjacent to the center...
The presented work considers the influence of the hafnium and molybdenum to zirconium ratio of Ti20Ta20Nb20(HfMo)20−xZrx (where x = 0, 5, 10, 15, 20 at.%) high-entropy alloys in an as-cast state for potential biomedical applications. The curren...
The presented work aimed to investigate the influence of the hafnium/(zirconium and molybdenum) ratio on the microstructure, microhardness and corrosion resistance of Ti20Ta20Nb20(ZrMo)20−xHfx (where x = 0, 5, 10, 15 and 20 at.%) high entropy a...
The presented work was focused on investigating the influence of the (hafnium and zirconium)/molybdenum ratio on the microstructure and properties of Ti20Ta20Nb20(ZrHf)20−xMox (where: x = 0, 5, 10, 15, 20 at.%) high entropy alloys in an as-cast...
The low hardness and poor wear resistance of laser-cladding 316L stainless steel impose significant constraints on its practical applications. In this study, a strategy for strengthening laser-cladding 316L stainless steel with WMoTaNb refractory hig...
Multi-component nitride thin films usually show high hardness and good wear resistance due to the nanoscale structure and solid-solution strengthening effect. However, the state of N atoms in the thin film and its effects on the compressive strength...
CoCrFeNiTax (x = 0, 1) coatings were prepared on the surface of TC4 by laser-cladding to improve the corrosive wear property of TC4 and extend its service life in corrosive media, ultimately aiming to improve its surface performance. The effects of T...
The strain-rate-dependent plasticity under uniaxial compression at the strain rates of 2 × 10−3, 2 × 10−4 and 2 × 10−5 s−1 in a Pd77.5Cu6Si16.5 alloy is investigated. At different strain rates, the serration events exhibit different amplitudes and ti...
The understanding of the oxidation behaviors of as-cast and annealed high-entropy alloys (HEAs) is currently limited. This work systematically investigates the influence of annealing on the microstructures and oxidation behaviors of AlCoCrFeNi-based...
of 9