Iron ore tailings (IOTs) are a form of solid waste produced during the beneficiation process of iron ore concentrate. In this paper, iron recovery from IOTs was studied at different points during a process involving pre-concentration followed by dire...
This study carried out tensile tests at definite elongation, tensile and shear tests on 4 admixture-modified styrene-acrylic emulsion-based cement composites (SECCs), and measured the strength, deformation, and energy consumption indexes of test spec...
In the framework of this publication, silica-lignin hybrid materials were designed, obtained, characterized and then used as admixtures for cement composites. High-energy mechanical grinding of individual components was used to produce the systems th...
This research was carried out to expand our knowledge of the effects of different admixtures on the properties of fly ash-based geopolymer composites. Three admixtures were used: a liquifying admixture based on stabilized polycarboxylates, a plastici...
The development of lignin-based admixtures (LBAs) for cement-based composites is an alternative to valorizing residual lignins generated in biorefineries and pulp and paper mills. Consequently, LBAs have become an emerging research domain in the past...
In this study, a technology for obtaining functional inorganic-organic hybrid materials was designed using waste polymers of natural origin, i.e., kraft lignin and magnesium lignosulfonate, and alumina as an inorganic component. Al2O3-lignin and Al2O...
The effects of different mineral admixtures on the evolution of static yield stress of common composite cementitious material paste and ultra-high-performance concrete (UHPC)-based paste were investigated. The results show that there are obvious diff...
High-strength engineered cementitious composites (HS-ECCs) have garnered significant attention for their superior mechanical properties and ductility. However, their high autogenous shrinkage, caused by a low water-to-binder ratio, high cementitious...
Moisture damage and low-temperature cracking are common distresses experienced by road pavement. Different types of modifiers, such as fibers, can be used to improve the quality of asphalt pavements. In this paper, lignin and glass fiber were selecte...
Due to the impact of economic and social development on the environment, there is an increasing demand for manufactured sand to replace natural sand as fine aggregate for concrete. At the same time, the effect of admixtures on the rheological propert...
Cement-based materials are essential in modern construction, valued for their versatility and performance. Rheological properties, including yield stress, plastic viscosity, and thixotropy, play indispensable roles in optimizing the workability, stab...
Crystalline admixtures (CAs) are new materials for promoting self-healing in concrete materials to repair concrete cracks. They have been applied to tunnel, reservoir dam, road, and bridge projects. The fundamental research and development of CAs are...
The conducted research aimed to evaluate the influence of admixtures of various modified starches on the rheological properties of cement composites and their influence on the compressive strength of hardened cement mortars. The study involved 17 dif...
The administration of three-in-one parenteral nutrition (PN) admixtures to pediatric patients requires special consideration, specifically concerning quality and physicochemical stability. The introduction of a new parenteral amino acid solution into...
Wasted oyster shells generate environmental pollution and odor, thereby causing inconvenience to people. In addition, low-quality aggregates are generated owing to the lack of sand. To address these problems, cementitious composites that replaced san...
The durability of a cement-based material is mainly dependent on its permeability. Modifications of porosity, pore-structure and pore-connectivity could have significant impacts on permeability improvement, which eventually leads to more durable mate...
To solve a number of problems in construction materials science, composites with nano and ultrafine admixtures were analyzed. Their properties were studied, taking into account the variants of homogenization and stabilization of the system. To charac...
Lignin and glass fiber were used as additives to improve the quality of road pavements and minimize moisture damage and cracking at low temperatures on asphalt pavement, according to a previous laboratory study. The aim of this paper is to make a sig...
Nowadays, admixtures are used with the aim to provide strength and durability to concrete with less water use. New and low-cost admixtures gained a large amount of consideration to mitigate the problems associated with concrete’s durability and servi...
Aiming at the problem of repeated repair of concrete caused by the damage of concrete structure repair system in a sulphate environment, the quicklime modified sulphoaluminate cement (CSA)–ordinary Portland cement (OPC) –mineral admixture...
The single-factor experiments are designed to quantitatively investigate the effects of silica fume, mineral powder, and fly ash on the mechanical and thermal insulation properties of desulfurization gypsum-based composites (DGCs). The effect mechani...
The ultra-high-performance fiber-reinforced cementitious composite (UHPFRC) is a new generation of building material with extremely high mechanical strength and durability, which can be used for ultra-high, thin-wall or long-span construction, that p...
This article presents recent research on cements containing GGBFS and their modifications with accelerating admixtures. The initial setting time and hydration heat evolution results are presented for cement CEM II/B-S and CEM III/A manufactured with...
This study investigates the mechanical and durability properties of fly ash-based engineered cementitious composites (ECC). The effect of various mineral additions, such as wheat husk ash (WHA), rice husk ash (RHA), glass powder (GP), and fibrillated...
The repurposing of gold (Au) mine tailings from artisanal and small-scale mining (ASGM) operations via alkali activation technology is a promising strategy for waste reduction in developing countries. Direct activation of mine tailings, however, is c...
Shrinkage of concrete during hardening is a serious problem in attempts to maintain the integrity of concrete structures. One of the methods of combating shrinkage is compensating for it using an expansive agent. The purpose of this work is to develo...
The compressive strength (Fc) of cement mortar (CM) is a key parameter in ensuring the mechanical reliability and durability of cement-based materials. Traditional testing methods are labor-intensive, time-consuming, and often lack predictive flexibi...
Belite-rich cement is a low carbon footprint binder. However, its use is accompanied by a low initial rate of hydration. This can be partially eliminated by grinding to a high specific surface or through the addition of admixtures (mineralizators or...
In this article, the effect of hydroxyethyl methyl cellulose (HEMC), which is a polymeric viscosity modifying admixture on the mineral based composites setting processes, was studied. Previous studies available in the literature included the evaluati...
The present paper focuses on the configuration possibilities of post -processor influencing mechanical properties of a given test sample produced by the FDM printer from different materials. The research consists of assessing the composite material c...
To investigate the sulfate resistance of recycled concrete with composite admixtures under dry–wet cycling, a single-factor experimental design was first conducted to study the deterioration patterns of recycled concrete with single and composi...
Organic rheology modifiers, especially superplasticizers and viscosity-modifying admixtures (VMAs), have become key components for the workability optimization of modern concrete. The development of these admixtures is crucial to the further performa...
The main aim of this study was to investigate the improved autogenous healing of concrete caused by a crystalline admixture in combination with textile reinforced concrete (TRC). This phenomenon (improved healing) has not yet been described by any in...
In order to study the degradation laws and mechanisms of admixture concretes with single-added SO42− and composite of Mg2+ and SO42−, respectively, the durability tests were conducted on three types of mineral admixture concretes (concretes with sing...
The aim of this research was to obtain two-layer polymer composites with favorable mechanical and functional properties. The composites consisted of one lower layer of polymer with less elastic properties, containing no admixtures, and one upper laye...
Raw clay is used nowadays in construction as a component of mortars and plasters and as a binder in composites based on straw or shives. It is a material with good sorption properties and vapor permeability, but it is susceptible to shrinkage, is not...
The treatment of silted sediment in the river is a global problem. The accumulation of waste sediment will lead to an adverse impact on the environment. In this paper, the silted sediment was reused to produce geopolymer composite materials via alkal...
To study the physical and chemical properties of grout containing fly ash, Class II fly ash was used as a mineral admixture and mixed with silicate cement to produce grout, and the rheological properties, strength properties, hydration properties, an...
This work shows the influence of admixture on the basic properties of the multicomponent PbZr1−xTixO3 (PZT)-type ceramics. It presents the results of four compositions of PZT-type material with the general chemical formula, Pb0.99M0.01((Zr0.49T...
Ondansetron (OND) is a serotonin type 3 receptor antagonist that exhibits antiemetic activity. From the clinical point of view, vomiting and nausea prevention is an important task. Anticancer treatment and recovery impact the patient’s overall state...
Organic admixtures based on polysaccharides are used in construction for modifying the properties of mortars and concretes. Gum arabic is an example of a polysaccharide-based biopolymer. The aim of the article was to investigate the possibilities of...
The aim of the research presented in the paper was to obtain new polymer composites with strong functional properties on the Epidian 5 epoxy resin matrix. The polymer composites contained admixtures of expanded graphite, powder graphite, birch bark c...
This research aims at gaining a further understanding of the impact of accelerating admixtures on the reactivity of supplementary cementitious materials (SCMs), which are widely used as a clinker replacement in blended cements. This was done on synth...
The kinetic regularities of the electrօspark sintering of SiC–TiC, SiC–VC composites at a pressure of 45 MPa and the temperatures of 1900 and 2000 °C have been established. At the first stage of the composite compaction process,...
In this paper, polymer composites based on polylactide (PLA) and epoxy resin (Epidian 5) were studied in terms of the influence of magnetic induction on their changes in physicochemical properties. The composites contained admixtures in the form of m...
Fibers used as reinforcement can increase the mechanical characteristics of engineering cementitious composites (ECC), but their frost resistance has received less attention. The mechanical properties of various fiber cementitious materials under the...
The present study explored the degradation law and service life prediction of tunnel lining concrete with different mineral admixtures under coupled actions of sulfate attack (SA) and drying–wetting (DW) cycles. The deterioration resistance coe...
Currently, chimney technology is looking for new materials with improved thermal insulation properties and, at the same time, adequate durability. The use of concretes based on lightweight aggregates, such as expanded perlite, is capable of meeting s...
This work presents the electrophysical properties of the multiferroic ceramic composites obtained as a result of combining both magnetic and ferroelectric material. The ferroelectric components of the composite are materials with the following chemic...
The hybrid type of pavement called semi-flexible or grouted macadam has gained popularity over the last few decades in various countries, as it provides significant advantages over both rigid and conventional flexible pavements. The semi-flexible pav...
of 8