Materials

Advances in Photoelectric Materials: Preparation, Characterization, Properties, and Applications

edited by

Anna Starczewska

and

Mirosława Kȩpińska

submission deadline 20 May 2026 | 1 articles | Viewed by 1120 | Submission Open

Keywords: photoelectric materials; optoelectronics; photodetectors; light sources; optical sensors; solar cells

(This special issue belongs to the Section Electronic Materials)

Multifunctional Materials for Biomedical, Cosmetic, and Purification Applications

edited by

Agnieszka Gładysz-Płaska

submission deadline 20 May 2026 | 1 articles | Viewed by 708 | Submission Open

Keywords: biomaterials; biopolymers; nanomaterials; carbon nanotubes; metal oxides; graphene; layered double hydroxides

(This special issue belongs to the Section Biomaterials)

Mechanical Properties and Deformation Behavior of Additive Manufactured Alloys

edited by Junxia Lv

submission deadline 20 May 2026 | 2 articles | Viewed by 689 | Submission Open

Keywords: metal alloys; additive manufacturing; laser powder bed fusion; direct energy deposition; electron beam powder bed fusion; mechanical properties; deformation behavior; advanced materials design

(This special issue belongs to the Section Metals and Alloys)

Surface Modulation of Semiconductor Quantum Dots for Advanced Optoelectronic Applications

edited by Xiaoli Yin and Chenghao Bi

submission deadline 20 May 2026 | 1 articles | Viewed by 675 | Submission Open

Keywords: semiconductor quantum dots; optoelectronic devices; light-emitting diodes; solar cells; surface design of micro/nanomaterials; novel quantum dots light-emitting materials; core-shell architectures and graded interface design

(This special issue belongs to the Section Optical and Photonic Materials)

Advanced Materials for Electrical Engineering: Fabrication, Testing and Applications

edited by Minxia Shi and

Xutao Han

submission deadline 20 May 2026 | 1 articles | Viewed by 671 | Submission Open

Keywords: piezoelectric ceramics; insulating paper; insulating oil; ferromagnetic materials; material performance testing

(This special issue belongs to the Section Electronic Materials)

Intelligent Metasurfaces and Metamaterials: From Computational Design to Dynamic Absorption

edited by

Yun He

and

Xun Ye

submission deadline 20 May 2026 | 1 articles | Viewed by 554 | Submission Open

Keywords: intelligent metasurfaces/metamaterials; dynamically tunable; reconfigurable metasurfaces; AI-aided design; multi-physics metasurfaces

(This special issue belongs to the Section Smart Materials)

Advances in Magnetic Materials and Applications

edited by

Serkan Caliskan

submission deadline 20 May 2026 | 1 articles | Viewed by 544 | Submission Open

Keywords: magnetic materials; spintronics; magnetic properties; magnetic devices; hard and soft magnets

(This special issue belongs to the Section Materials Physics)

MXene-Based Electromagnetic Functional Devices

edited by

Zhifang Liu

and

Weijia Luo

submission deadline 20 May 2026 | Viewed by 204 | Submission Open

Keywords: MXene synthesis; electromagnetic wave absorption; electromagnetic shielding; flexible and wearable devices; multifunctional composites

(This special issue belongs to the Section Electronic Materials)

Development and Characterization of Linear and Nonlinear Optical Crystals

edited by

Farhan Mumtaz

,

Bohong Zhang

and

Jie Huang

submission deadline 20 May 2026 | Viewed by 176 | Submission Open

Keywords: optical crystals; nonlinear optics; fiber-optic sensors; characterization techniques; photonic devices; synthesis of optical materials; environmental sensing; healthcare applications; integrated optics; advanced materials

(This special issue belongs to the Section Optical and Photonic Materials)

Bioinspired Micro/Nanomaterials and Devices for Biomedical Applications

edited by Fangyu Zhang, Yaou Duan and

Songsong Tang

submission deadline 20 May 2026 | Viewed by 166 | Submission Open

Keywords: drug delivery; micro/nanomaterials; micro/nanorobots; bioinspired systems; theranostics; hydrogel; wearable device

(This special issue belongs to the Section Biomaterials)

Material Advances and Challenges in Pulse Power System

edited by

Zhigang Liu

submission deadline 20 May 2026 | Viewed by 142 | Submission Open

Keywords: metal ablation; insulator degradation; energy storage dielectrics; pulse capacitors; spark switch; pulse power; plasma

(This special issue belongs to the Section Electronic Materials)

Sustainable and Functional Materials: From Design to Applications

edited by

Liu Liu

and Zhongyu Yang

submission deadline 20 May 2026 | Viewed by 135 | Submission Open

Keywords: environmental sustainability; functionalization; biomass and biomaterial; degradable polymer; novel manufacturing technology; performance and application

(This special issue belongs to the Section Green Materials)

Additive Manufacturing of Metals, Alloys, and Ceramics: Processes, Microstructures, and Properties

edited by

,

,

and

submission deadline 20 May 2026 | Viewed by 126 | Submission Open

Keywords: powder bed fusion; direct metal deposition; arc additive manufacturing; microstructural characterisation; mechanical properties; fatigue properties; corrosion resistance; titanium alloys; steels; aluminium alloys; high-entropy alloys

(This special issue belongs to the Section Manufacturing Processes and Systems)

First-Principles Study on Functional Materials

edited by

Xue Li

submission deadline 20 May 2026 | Viewed by 102 | Submission Open

Keywords: material design; functional materials; energy materials; first-principles calculations; high-performance simulation; computational material science

(This special issue belongs to the Section Materials Simulation and Design)

Advanced Materials for Dentistry and Maxillofacial Prosthodontics: From Biocompatibility to Biomimetic Design and Implant Surface Bioengineering

edited by Corina Marilena Cristache and Fabrizio Di Francesco

submission deadline 20 May 2026 | Viewed by 96 | Submission Open

Keywords: PEEK; PEKK; silicone elastomers; maxillofacial prosthodontics; dental implants; titanium; zirconia; surface modification; biofunctionalization; antibiofilm coatings; osseointegration; soft-tissue integration; tribocorrosion; adhesion; primers/coupling agents; color stability; resin composites; ceramics; fiber-reinforced composites; 3D printing; subtractive manufacturing; CAD/CAM; biomimetic materials; biocompatibility; mechanical properties; optical properties; porous/lattice structures; photofunctionalization; AI-assisted modeling

(This special issue belongs to the Section Biomaterials)

Characteristics of Dental Ceramics (Second Edition)

edited by

Kusai Baroudi

and

Marina Amaral

submission deadline 20 May 2026 | Viewed by 95 | Submission Open

Keywords: ceramics; glass ceramics; polycrystalline ceramics; CAD/CAM; zirconia; lithium silicate and derivatives physicochemical properties; mechanical properties; fatigue; wear; characterization techniques

(This special issue belongs to the Section Advanced and Functional Ceramics and Glasses)

Property Enhancement of Laser Powder Bed Fused Alloy

edited by

Cuiling Zhao

, Baixin Dong and

Ran Cui

submission deadline 20 May 2026 | Viewed by 88 | Submission Open

Keywords: laser powder bed fusion; field-assisted additive manufacturing; microstructure control; process monitoring; property improvement; process optimization; material– laser interaction; surface finish enhancement; hybrid manufacturing; in situ monitoring

(This special issue belongs to the Section Manufacturing Processes and Systems)

Advanced Polymer Composites and Nanocomposites in Automotive Applications

edited by

Rajesh Mishra

submission deadline 20 May 2026 | Viewed by 88 | Submission Open

Keywords: polymer-based composites; automotive components; nanoscale fillers; lightweight materials; mechanical strength; thermal stability; barrier properties; electrical conductivity; flame retardancy

(This special issue belongs to the Section Advanced Composites)

Advances in High-Temperature Ceramics and Refractory Materials

edited by Quanli Jia

submission deadline 20 May 2026 | Viewed by 82 | Submission Open

Keywords: ultra-high temperature porous materials; thermal conductivity; compressive strength; oxidation resistance

(This special issue belongs to the Section Advanced and Functional Ceramics and Glasses)

Laser Manufacturing and Material Modification

edited by

Ye Ding

,

Zhengjie Fan

and

Yanan Liu

submission deadline 20 May 2026 | Viewed by 79 | Submission Open

Keywords: short/ultrashort-pulse laser manufacturing; laser-assisted hybrid manufacturing; laser-induced material modification; laser-manufactured micro/nanodevice; development of novel laser manufacturing technology; laser– material interaction mechanism

(This special issue belongs to the Section Manufacturing Processes and Systems)

Synthesis and Applications in Magnetic Nanostructures

edited by Ningning Song and Jialong Liu

submission deadline 20 May 2026 | Viewed by 76 | Submission Open

Keywords: magnetic nanoparticles; ferrite nanoparticles; magnetic alloy; nanobiotechnology; intelligent nanomaterials

(This special issue belongs to the Section Advanced Nanomaterials and Nanotechnology)

Advances in Phase Change Materials: Properties, Preparation, and Applications

edited by

Fei Zhang

and Yinhang Zhang

submission deadline 20 May 2026 | Viewed by 70 | Submission Open

Keywords: phase change materials (PCMs); thermal energy storage; composite PCMs; thermal conductivity; nanocomposites; building energy efficiency; photothermal storage and controlled release; phase transition mechanisms

(This special issue belongs to the Section Energy Materials)

Next-Generation Metal Additive Manufacturing: Intelligent Microstructure Design, Mechanical Reliability, and Advanced Material Systems for Industrial Applications

edited by Kapil Gangwar and

Ramulu Mamidala

submission deadline 20 May 2026 | Viewed by 69 | Submission Open

Keywords: fracture mechanics; fatigue and damage tolerance; composite materials and structures; microstructure– property relationships; machining and surface integrity; residual stress mitigation; advanced manufacturing for aerospace components; high-performance ceramics and composites; in-situ monitoring and process control; multi-disciplinary materials and manufacturing integration

(This special issue belongs to the Section Manufacturing Processes and Systems)

Advances in Metallurgy Technologies: Materials Preparation and Metal Recycling

edited by Wenhua Xu

submission deadline 20 May 2026 | Viewed by 69 | Submission Open

Keywords: advanced materials; metallurgical new technologies; high-efficiency recovery of valuable metals; high-value utilization of secondary materials; sustainable development; circular economy

(This special issue belongs to the Section Metals and Alloys)

High-Temperature Inorganic Oxygen/Hydrogen Permeable Membranes: From Material Design to Industrial Applications

edited by

Guangru Zhang

submission deadline 20 May 2026 | Viewed by 61 | Submission Open

Keywords: ceramic oxygen-permeable membrane; hydrogen separation membrane; high-temperature stability; perovskite materials; hollow fiber membranes; membrane catalytic reactor; plasma catalysis; electrocatalysis; industrial oxygen production; syngas conversion

(This special issue belongs to the Section Thin Films and Interfaces)

Adsorption Materials and Their Applications (3rd Edition)

edited by

Bożena Czech

submission deadline 20 May 2026 | Viewed by 60 | Submission Open

Keywords: adsorbents; adsorption; engineered materials; emerging pollutants; persistent pollutants; water and wastewater treatment; decontamination

(This special issue belongs to the Section Porous Materials)

From Lab to Industry: Structure, Durability, and Cost in Next-Generation Water-Splitting Catalysts

edited by

Israr Ul Hassan

and

Gowhar Ahmad Naikoo

submission deadline 20 May 2026 | Viewed by 59 | Submission Open

Keywords: 2D materials; nanoporous materials; MXenes; single-atom sites; high-entropy alloys; durability and scalability; electrolysis; water splitting; green hydrogen production

(This special issue belongs to the Section Catalytic Materials)

Advances in Functional Photoactive Materials and Their Applications

edited by Stela Minkovska

submission deadline 20 May 2026 | Viewed by 57 | Submission Open

Keywords: functional photoactive materials; photosensitive and photoswitchable systems; fluorescent; phosphorescent; and electroluminescent materials; photochromic and stimuli-responsive compounds; smart optoelectronic; photonic devices; light– matter interaction; high-resolution imaging nanoparticles

(This special issue belongs to the Section Optical and Photonic Materials)

Manufacturing, Characterization and Modeling of Advanced Materials (Second Edition)

edited by

Madhav Baral

and Charles Lu

submission deadline 20 May 2026 | Viewed by 57 | Submission Open

Keywords: synthesis and fabrication; additive manufacturing; material characterization; finite element modeling

(This special issue belongs to the Section Mechanics of Materials)

Metallic and Ceramic Materials Integrity—Surface Engineering for Wear, Corrosion and Erosion Prevention (3rd Edition)

edited by

Mirosław Szala

and

Mariusz Walczak

submission deadline 20 May 2026 | Viewed by 54 | Submission Open

Keywords: wear; tribology and friction; erosion and corrosion phenomena; wear behavior and wear mechanisms; additive manufacturing technology; hardfacing; cladding and overlay welding; surface engineering and laser surfacing; thermal spraying; PVD thin-film deposition; ion implantation; shot peening and cold working processing; artificial neural network; computational simulations

(This special issue belongs to the Section Corrosion)

Advances in Functional Polymers and Nanocomposites (Second Edition)

edited by

Przemysław Pączkowski

and

Barbara Gawdzik

submission deadline 20 May 2026 | Viewed by 53 | Submission Open

Keywords: polymer composites; nanocomposites; advanced polymers; functional polymers; properties and structure of functional polymer composites; degradation and stability of polymer composites

(This special issue belongs to the Section Advanced Composites)

High Entropy Alloys, Refractory Materials and Advanced Metallic Materials: Mechanical Properties and Applications

edited by Yafei Pan,

Fenghua Luo

and Siyao Xie

submission deadline 20 May 2026 | Viewed by 48 | Submission Open

Keywords: high-entropy alloys; refractory metals; mechanical properties; high-temperature applications; spark plasma sintering; additive manufacturing; microstructure– property relationships; densification mechanisms; extreme environments

(This special issue belongs to the Section Metals and Alloys)

Emerging Functionalities and Device Applications of Two-Dimensional Materials for Sustainable Technologies

edited by Muhammad Hilal

submission deadline 20 May 2026 | Viewed by 48 | Submission Open

Keywords: 2D materials; MXenes; heterostructures; transition metal dichalcogenides; energy storage; flexible electronics; electrochemical sensors; interface engineering; nanostructured materials; sustainable technologies

(This special issue belongs to the Section Materials Chemistry)

Sustainable Recycling Techniques of Pavement Materials (3rd Edition)

edited by

Dongdong Ge

,

Kezhen Yan

and Li Liu

submission deadline 20 May 2026 | Viewed by 48 | Submission Open

Keywords: pavement recycling techniques; industrial and construction waste utilization in pavement engineering; sustainable techniques for pavement materials; green low-carbon and durable pavement structures and materials; evaluation and simulation of sustainable pavement materials; infrastructure durability improvements by recycled pavement materials; life cycle assessment (GHG emission reduction/life cycle cost decrease attributed to the utilization of waste in pavement materials)

(This special issue belongs to the Section Construction and Building Materials)

Advanced Cement-Based Composite Materials and Composite Intelligent Design (2nd Edition)

edited by Weichen Tian, Wei Wang, Kunyang Yu and Mingzhi Wang

submission deadline 20 May 2026 | Viewed by 46 | Submission Open

Keywords: advanced cement-based composite materials; concrete in harsh environment; fibers; phase-change materials; artificial intelligence; infrastructure construction; low-carbon fabrication; composition design and performance prediction; additive manufacturing

(This special issue belongs to the Section Construction and Building Materials)

Physical Properties of Crystals: Thermal, Elastic, Optical, and Spectral Properties

edited by Jacek Zakrzewski and Mirosław Maliński

submission deadline 20 May 2026 | Viewed by 45 | Submission Open

Keywords: crystal properties; optoelectronics; nanotechnology; signal detection; optics; crystalline materials; microelectronics

(This special issue belongs to the Section Materials Physics)

Design and Process Strategies for Mechanical Reinforcement in Polymer Additive Manufacturing

edited by

Seong Je Park

submission deadline 20 May 2026 | Viewed by 40 | Submission Open

Keywords: additive manufacturing; material extrusion; powder bed fusion; binder jetting; mechanical reinforcement; process optimization; design for additive manufacturing; post-processing; machine learning and AI optimization; numerical simulation and modeling

(This special issue belongs to the Section Manufacturing Processes and Systems)

Optical Properties of Crystals

edited by

Marius Stef

submission deadline 20 May 2026 | Viewed by 40 | Submission Open

Keywords: optical spectroscopy; laser crystals; crystal field effects; defect characterization; nonlinear optics

(This special issue belongs to the Section Optical and Photonic Materials)

Materials for Dentistry: Experiments and Practice

edited by

Grzegorz Chladek

submission deadline 20 May 2026 | Viewed by 39 | Submission Open

Keywords: dental materials; orthodontic materials; maxillofacial surgery materials; prosthetic materials; restorative materials; mouthguards; biomaterials; polymers; clinical performance; composites; metals and metal alloys; ceramics; cements; surface modifications; antimicrobial properties; biological properties; cytotoxicity; mechanical properties; functional properties; aesthetic properties; wear; oral environment; nanomaterials; biofilm; materials technologies; additive technologies; CAD/CAM technologies; 3D printing

(This special issue belongs to the Section Biomaterials)

Solid-State Electrolytes: Synthesis, Characterization and Applications

edited by Ruizhi Yang

submission deadline 20 May 2026 | Viewed by 36 | Submission Open

Keywords: solid-state lithium battery; solid-state electrolyte; ionic conductivity; ion-transport dynamics; Lithium metal compatibility; air stability; interfacial engineering

(This special issue belongs to the Section Energy Materials)

Biocompatible Nanomaterials for Medical Applications

edited by

Kai Li

and Nannan Zheng

submission deadline 20 May 2026 | Viewed by 35 | Submission Open

Keywords: cancer nanotherapy; drug delivery nanomaterials; immune nanomaterials; photothermal therapy; epigenetics in cancer; antitumor immunity; nanomaterial imaging; multifunctional nanocomposites; nanomaterial biocompatibility

(This special issue belongs to the Section Biomaterials)

Thermal Management Functional Composites: Mechanism, Design, Performance and Application

edited by Duo Pan

submission deadline 20 May 2026 | Viewed by 33 | Submission Open

Keywords: thermal management; structural design; multi-scale synthesis; thermal conduction; thermal insulation; thermal conversion; radiative cooling; aerogel-based composites; heat transfer mechanism; performance optimization

(This special issue belongs to the Section Advanced Composites)

Synthesis, Characterization and Applications of Ionic Liquids (ILs)

edited by Jan Blahut

submission deadline 20 May 2026 | Viewed by 32 | Submission Open

Keywords: ionic liquids; materials science; synthesis; characterization; physical properties; chemical properties; advanced applications; sustainable technologies

(This special issue belongs to the Section Soft Matter)

Advancements in Perovskite Solar Cells for Improved Energy Efficiency

edited by Mykhailo Solovan

submission deadline 20 May 2026 | Viewed by 26 | Submission Open

Keywords: perovskite solar cells; hybrid materials; interface engineering; stability; defect passivation; radiation resistance; charge transport; tandem photovoltaics; scalable fabrication; optoelectronic devices

(This special issue belongs to the Section Energy Materials)

Advanced Polymer Matrix Nanocomposite Materials (3rd Edition)

edited by

Michał Strankowski

submission deadline 20 May 2026 | Viewed by 15 | Submission Open

Keywords: polymers; nanocomposites; graphene; carbon nanotubes; montmorillonites; thermal analysis

(This special issue belongs to the Section Advanced Composites)

Advances in Sustainable Construction Materials, Third Edition

edited by Abbas Solouki and Abir Al-Tabbaa

submission deadline 30 May 2026 | 13 articles | Viewed by 10641 | Submission Open

Keywords: smart materials; low-carbon binders; sustainability; LCA; construction materials; concrete; asphalt; infrastructure; material characterization; waste fines

(This special issue belongs to the Section Construction and Building Materials)

Advanced Superconducting Materials and Technology

edited by

Tomasz Czujko

and

Daniel Gajda

submission deadline 30 May 2026 | 4 articles | Viewed by 3431 | Submission Open

Keywords: superconducting materials; MgB2; iron-based superconductors; high Tc Superconductors; synthesis and characterization; application of superconductors

(This special issue belongs to the Section Quantum Materials)

Advanced Polymers and Composites for Multifunctional Applications, 2nd Edition

edited by

Kinga Pielichowska

,

Katarzyna Nowicka

and

Piotr Szatkowski

submission deadline 30 May 2026 | Viewed by 40 | Submission Open

Keywords: polymer composites; nanocomposites; advanced polymers; high-performance polymers; multifunctional systems; properties and structure of functional polymer composites; degradation and stability of polymer composites; functional polymer composites for the environment

(This special issue belongs to the Section Polymeric Materials)

Advances in Wear Behaviour and Tribological Properties of Materials

edited by

Qianxi He

, Abul Fazal M. Arif and

Ricardo D. Torres

submission deadline 31 May 2026 | 2 articles | Viewed by 2140 | Submission Open

Keywords: tribological properties; wear resistance; wear mechanisms; surface topography; frictional behavior; material surface engineering

(This special issue belongs to the Section Mechanics of Materials)

Selected Papers from the 4th International Online Conference on Materials (IOCM 2025)

edited by

Ingo Dierking

submission deadline 31 May 2026 | 1 articles | Viewed by 1480 | Submission Open

Keywords: optical; electric and magnetic materials; nanomaterials; quantum materials; soft matter; biomaterials; composites; interfaces; materials theory; simulations and AI; materials for energy harvesting; conversion and storage; green materials; materials manufacturing

Advances in Luminescent Materials: Characterization and Device Applications

edited by Kai Li and Baojiu Chen

submission deadline 31 May 2026 | 1 articles | Viewed by 620 | Submission Open

Keywords: phosphors; LEDs; bioimaging; thermometer; anti-counterfeiting; luminescent materials

(This special issue belongs to the Section Optical and Photonic Materials)

Advances in Solid Oxide Electrochemical Cells: Materials, Innovations and Applications

edited by Kai Pei

submission deadline 31 May 2026 | Viewed by 148 | Submission Open

Keywords: solid oxide fuel cells (SOFCs); solid oxide electrolysis cells (SOECs); reversible protonic ceramic electrochemical cells (R-PCECs); energy storage; hydrogen production; materials innovation; ceramic materials; electrode design

(This special issue belongs to the Section Energy Materials)

Deformation/Fracture Behavior, Microstructure Evolution and Mechanical Properties of Steel

edited by

Ming-Wei Wu

submission deadline 31 May 2026 | Viewed by 40 | Submission Open

Keywords: steel; microstructure; mechanical behavior; deformation; fracture; material analysis; simulation

(This special issue belongs to the Section Metals and Alloys)

Solar Cells and Photovoltaic Materials: Technologies and Applications

edited by Zhen Wang

submission deadline 31 May 2026 | Viewed by 35 | Submission Open

Keywords: perovskite photovoltaics; crystallization control; device stability; scalable fabrication

(This special issue belongs to the Section Energy Materials)

Reinforced Polymer Composites with Natural and Nano Fillers

edited by Ge Cao and He Zhang

submission deadline 10 Jun 2026 | 1 articles | Viewed by 768 | Submission Open

Keywords: conductive polymers; natural fiber composites; nanofiller reinforcement; biodegradable composites; interface engineering; hybrid filler systems; surface modification of fillers; green processing technologies; sustainable polymer materials; multifunctional nanocomposites

(This special issue belongs to the Section Advanced Composites)

Enhanced Properties of Advanced Materials via Surface Modification and Composite Coatings

edited by

Shuhao Liu

and Jun Kyun Oh

submission deadline 10 Jun 2026 | 1 articles | Viewed by 467 | Submission Open

Keywords: surface modification; composite coatings; multifunctional properties; polymers; nanomaterials

(This special issue belongs to the Section Thin Films and Interfaces)

Chemistry and Technology of Materials Based on Silicon Compounds (2nd Edition)

edited by

Karol Szubert

submission deadline 10 Jun 2026 | Viewed by 374 | Submission Open

Keywords: silicon-based materials; silanes; polysiloxanes; silicates; polymeric materials; ceramic materials; protective coatings; coatings— surface chemistry and properties; materials characterization; applications

(This special issue belongs to the Section Materials Chemistry)

Sustainable Corrosion Protection Coatings

edited by

Mian Hammad Nazir

submission deadline 10 Jun 2026 | Viewed by 356 | Submission Open

Keywords: sustainable coatings; corrosion protection; bio-based coatings; self-healing coatings; green materials; environmental impact; protective polymers; material durability; eco-friendly coatings; corrosion resistance

(This special issue belongs to the Section Corrosion)

The Development of Sustainable Concrete with Solid Waste and By-Products (Second Edition)

edited by

Ina Pundienė

and Jolanta Pranckevičienė

submission deadline 10 Jun 2026 | 1 articles | Viewed by 351 | Submission Open

Keywords: cement based materials; alkali-activated materials; organic and inorganic waste; ceramic materials; admixture; nanomaterials; durability; material characterization

(This special issue belongs to the Section Construction and Building Materials)

Advances in Structural Health Monitoring (SHM) and Nondestructive Testing (NDT) of Materials

edited by

Donghoon Kang

and

Kyungwho Choi

submission deadline 10 Jun 2026 | Viewed by 202 | Submission Open

Keywords: structural health monitoring (SHM); non-destructive testing (NDT) and non-destructive evaluation (NDE); inspection and analyzing skills; modeling and simulation; theory and mechanism; smart structures and integrated system; industrial and commercial applications; ultrasonics; electromagnetics; radiography; optical and thermal methods; nano-; bio-; info-tech-; and advanced sensors for NDT; non-destructive inspection for Industry 4.0; smart sensing materials for structural health monitoring; functional materials for advanced sensor systems; self-powered sensor systems

(This special issue belongs to the Section Advanced Materials Characterization)

Advances in Plasma and Laser Engineering (Third Edition)

edited by

Mariusz Jasinski

submission deadline 10 Jun 2026 | Viewed by 78 | Submission Open

Keywords: plasma deposition; laser deposition; plasma treatment of materials; laser treatment of materials; plasma activation of surfaces; laser activation of surfaces; pulsed plasmas; pulsed lasers; new materials; plasma sources; laser sources; plasma engineering; laser engineering

(This special issue belongs to the Section Manufacturing Processes and Systems)

Next-Generation Nanomaterials for High-Performance Supercapacitors

edited by Péter Baumli and Máté Czagány

submission deadline 10 Jun 2026 | 1 articles | Viewed by 74 | Submission Open

Keywords: nanomaterials; supercapacitor; energy storage; smart energy; battery; hydrogen storage; hybrid system; catalytic system; nanostructures

(This special issue belongs to the Section Energy Materials)

Characterization, Properties, and Applications of New Metallic Alloys (2nd Edition)

edited by

Weimin Wang

and

Ki Buem Kim

submission deadline 10 Jun 2026 | Viewed by 70 | Submission Open

Keywords: metallic glasses; medium/high-entropy alloys; nano metallic alloys; nano metallic alloys; mechanical properties; corrosion; function

(This special issue belongs to the Section Metals and Alloys)

Advanced Functional Coatings for Surface Engineering: Deposition, Properties and Applications

edited by

Karol Kyzioł

submission deadline 20 Jun 2026 | 7 articles | Viewed by 6277 | Submission Open

Keywords: surface modification; functional coatings; hybrid coatings; layered materials; surface properties; bio-functional coatings; drug delivery systems; anti-wear application; anti-corrosion protection; biocompatibility

(This special issue belongs to the Section Thin Films and Interfaces)

Advances in Coatings on Metals for Corrosion Protection

edited by Di Yun

submission deadline 20 Jun 2026 | 1 articles | Viewed by 4478 | Submission Open

Keywords: coatings; corrosion; metals; adherence; failure

(This special issue belongs to the Section Corrosion)

Advanced Composite Materials for Multifunctional Applications: Design, Fabrication, and Performance Optimization

edited by

Pradeep Menezes

submission deadline 20 Jun 2026 | 4 articles | Viewed by 4311 | Submission Open

Keywords: advanced composite materials; manufacturing techniques; smart composites; green composite materials; computational nodeling and AI-driven design

(This special issue belongs to the Section Advanced Composites)

Sustainable and Eco-Friendly Concrete: Innovations in Green Binders and Recycled Materials

edited by

Wangjie Wu

, Yangming Gao, Mingjun Hu and

Dongdong Yuan

submission deadline 20 Jun 2026 | 4 articles | Viewed by 3573 | Submission Open

Keywords: sustainable technologies; eco-friendly materials; asphalt concrete; cement concrete green binders; recycled materials

(This special issue belongs to the Section Construction and Building Materials)

Calcium Phosphate Biomaterials with Medical Applications

edited by

Margareta Gabriela Ciobanu

submission deadline 20 Jun 2026 | 4 articles | Viewed by 2618 | Submission Open

Keywords: biomaterials; calcium phosphates; hydroxyapatite; coatings; scaffolds; composites; biomineralization; delivery systems

(This special issue belongs to the Section Biomaterials)

Advances in Modern Cement-Based Materials for Composite Structures

edited by

Faxing Ding

and

Fei Lyu

submission deadline 20 Jun 2026 | 3 articles | Viewed by 2568 | Submission Open

Keywords: ultra-high-performance concrete (UHPC); composite structures; fiber-reinforced concrete; lightweight aggregate concrete (LWAC); concrete-filled steel tubes (CFST)

(This special issue belongs to the Section Construction and Building Materials)

Integrating Sustainable Innovations in Pavement Materials and Engineering

edited by Yanhui Niu and

Jiangmiao Yu

submission deadline 20 Jun 2026 | 3 articles | Viewed by 2369 | Submission Open

Keywords: sustainable pavement; asphalt binder modification; low-emission materials; green infrastructure; recycling; environmental impact; intelligent construction; life cycle assessment; green pavement maintenance

(This special issue belongs to the Section Construction and Building Materials)

Sustainability and Performance of Cement-Based Materials

edited by

Md Jihad Miah

and Noor Md. Sadiqul Hasan

submission deadline 20 Jun 2026 | 1 articles | Viewed by 2092 | Submission Open

Keywords: sustainability; low-carbon building materials; recycled materials; supplementary cementitious material; carbon utilisation; durability and sustainability of construction materials; strengthening techniques and mechanisms; characterisation of cement-based materials; life cycle assessment

(This special issue belongs to the Section Construction and Building Materials)

Properties, Processing and Applications of Diamond and Related Superhard Materials

edited by Jie Gao and Shengwang Yu

submission deadline 20 Jun 2026 | 2 articles | Viewed by 2003 | Submission Open

Keywords: diamond and related superhard materials; properties of diamond; processing of diamond; polishing; etching; application of diamond; growth of diamond; nucleation of diamond; low temperature growth; heteroepitaxial single crystal; diamond coating on WC-Co; diamond coating on GaN; diamond coating on Ga2O3

(This special issue belongs to the Section Materials Physics)

The Additive Manufacturing of Metallic Alloys (Second Edition)

edited by

Longqing Chen

,

Sheng Cao

and

Wenbin Qiu

submission deadline 20 Jun 2026 | 2 articles | Viewed by 1937 | Submission Open

Keywords: additive manufacturing; 3D printing; powder bed fusion; directed energy deposition; post-processing; microstructure; anisotropy; columnar grain; non-equilibrium solidification; modeling and simulation

(This special issue belongs to the Section Metals and Alloys)

Advanced Steel Materials: 3D Printing, Phase Transformation, and Mechanical Properties

edited by

Wojciech Sitek

and

Mariusz Król

submission deadline 20 Jun 2026 | 2 articles | Viewed by 1933 | Submission Open

Keywords: advanced steels; 3D printing; high-strength steels; stainless steels; high-performance steels; microstructure; phase transformations; mechanical properties; hybrid technologies

(This special issue belongs to the Section Metals and Alloys)

Latest Developments in Advanced Machining Technologies for Materials

edited by

Jiaming Zhan

and

Yuchao Bai

submission deadline 20 Jun 2026 | 2 articles | Viewed by 1827 | Submission Open

Keywords: advanced machining; hybrid machining; micro/nano machining; digital manufacturing; process optimization; sustainable manufacturing

(This special issue belongs to the Section Manufacturing Processes and Systems)

Advances in Lithium-Ion Batteries: Electrode Materials and Their Applications

edited by

Lihan Zhang

submission deadline 20 Jun 2026 | 1 articles | Viewed by 1636 | Submission Open

Keywords: high-energy-density cathode materials; high-capacity anodes; high-safety electrolytes; self-healing electrodes; fast-charging electrodes; degradation mechanisms; recycling

(This special issue belongs to the Section Energy Materials)

Carbon Fiber Reinforced Polymers (3rd Edition)

edited by

Francesca Lionetto

submission deadline 20 Jun 2026 | 2 articles | Viewed by 1464 | Submission Open

Keywords: carbon fibers; thermosetting resins; thermoplastic matrix composites; manufacturing technologies; joining multiscale composites; recycling sustainability

(This special issue belongs to the Section Polymeric Materials)

Manufacturing, Heat Treatment and Forming of Advanced Metallic and Ceramic Materials (3rd Edition)

edited by

Henryk Paul

,

Marcin Wachowski

and

Sebastian Mróz

submission deadline 20 Jun 2026 | 2 articles | Viewed by 1393 | Submission Open

Keywords: manufacturing; heat treatment; forming; welding; metallic materials; ceramics; composites; sintering

(This special issue belongs to the Section Manufacturing Processes and Systems)

Advanced Materials for Flexible Sensing Applications and Electronics

edited by

Linpeng Liu

and

Changchao Zhang

submission deadline 20 Jun 2026 | 1 articles | Viewed by 1375 | Submission Open

Keywords: flexible strain sensor; flexible pressure sensor; sensing microstructure; sensing functional surfaces; sensing strain materials

(This special issue belongs to the Section Electronic Materials)

Advanced Abrasive Processing Technology and Applications (Second Edition)

edited by Yufei Gao

submission deadline 20 Jun 2026 | 1 articles | Viewed by 1303 | Submission Open

Keywords: precision/ultra-precision abrasive machining; sawing; grinding; lapping; material removal mechanism; machined surface integrity; difficult-to-machine materials; processing damage; processing monitoring

(This special issue belongs to the Section Manufacturing Processes and Systems)

New Advances in High Entropy Alloys

edited by Anthoula Poulia and

Alexander E. Karantzalis

submission deadline 20 Jun 2026 | 2 articles | Viewed by 1215 | Submission Open

Keywords: any papers could be published inthis special issue! Kind regards;

(This special issue belongs to the Section Metals and Alloys)

Sustainable Eco-Friendly Advanced Geopolymers: Leveraging Recycled, Bio-Based, and Industrial Waste Constituents

edited by

Katarzyna Łoś

and

Barbara Kozub

submission deadline 20 Jun 2026 | 1 articles | Viewed by 1017 | Submission Open

Keywords: sustainable composites; green construction materials; bio-based composites; natural fiber-reinforced materials; geopolymer composites; alkali-activated materials; recycled materials; waste-based fillers and reinforcements; eco-friendly infrastructure; circular economy in construction; low-carbon construction technologies; life cycle assessment (LCA); durability of sustainable materials; sustainable infrastructure solutions

(This special issue belongs to the Section Green Materials)

Mechanical Behavior of Advanced High-Strength Alloys

edited by

Ruitao Qu

,

Yanzhong Tian

and

Xiaodi Wang

submission deadline 20 Jun 2026 | 1 articles | Viewed by 994 | Submission Open

Keywords: high-strength steel; high-strength aluminum alloys; high-strength copper alloys; high-strength magnesium alloys; high-strength superalloys; high-entropy alloys; amorphous alloys; additively manufactured high-strength alloys

(This special issue belongs to the Section Metals and Alloys)

Synthesis and Applications of Metal–Organic Frameworks

edited by

Anastasia D. Pournara

submission deadline 20 Jun 2026 | 1 articles | Viewed by 902 | Submission Open

Keywords: metal– organic frameworks (MOFs); porous materials; gas storage; gas separation; catalysis; drug delivery; sensing; water purification; energy storage; applications of MOFs

(This special issue belongs to the Section Porous Materials)

Processing and Microstructure Design of Advanced Ceramics

edited by

Bo Ren

and Haiyang Chen

submission deadline 20 Jun 2026 | 1 articles | Viewed by 860 | Submission Open

Keywords: ceramics; engineering application; microstructure; mechanical properties; thermal properties

(This special issue belongs to the Section Advanced and Functional Ceramics and Glasses)

Functionalized Ceramics and Their Composites: Preparation, Properties and Applications—2nd Edition

edited by Ranran Su and Hongliang Zhang

submission deadline 20 Jun 2026 | 1 articles | Viewed by 829 | Submission Open

Keywords: functionalized ceramics; composites; processing; composition tailoring

(This special issue belongs to the Section Advanced and Functional Ceramics and Glasses)

Foam Materials and Applications

edited by

Zefeng Jing

and

Yanqing Niu

submission deadline 20 Jun 2026 | 1 articles | Viewed by 691 | Submission Open

Keywords: foam materials; energy materials; energy storage; firefighting foam; foam structure; extinguishment foam; fire disaster; coal combustion; coal fire

(This special issue belongs to the Section Porous Materials)

Towards Zero Waste: Bio-Based and Biodegradable Materials in Waste Management

edited by Shanshan Xu and Grégory Stoclet

submission deadline 20 Jun 2026 | 1 articles | Viewed by 601 | Submission Open

Keywords: biodegrable polymers; bio-based polymers; degradation of biodegrable polymers; structure– property relationship; food packaging; biomedical application

(This special issue belongs to the Section Polymeric Materials)

Research on Material Durability and Mechanical Properties (2nd Edition)

edited by

Vaidas Lukoševičius

and

Žilvinas Bazaras

submission deadline 20 Jun 2026 | 1 articles | Viewed by 427 | Submission Open

Keywords: strength of materials; plasticity; durability; fatigue; creep; fracture; shakedown; ratcheting; experimental mechanics; finite element method

(This special issue belongs to the Section Mechanics of Materials)

Electrochemical Processing and Its Composite Processing Techniques in Aeronautics and Astronautics Applications

edited by Hansong Li and Xiaolei Chen

submission deadline 20 Jun 2026 | 1 articles | Viewed by 407 | Submission Open

Keywords: electrochemical machining; electrochemical deposition; electrochemical additive manufacturing; electrochemical post-treatment; corrosion and protection; electrochemical composite processing; processing quality improvement; hard-to-machine materials; processing mechanism

(This special issue belongs to the Section Materials Chemistry)

Multiscale Simulation of Advanced Materials and Structures

edited by

Bo Wu

and

Mingqing Liao

submission deadline 20 Jun 2026 | Viewed by 399 | Submission Open

Keywords: microstructure and properties; multiscale modeling; computational material science; material genome initiative; machine learning; database; CALPHAD; first-principle calculations; multiphysical field

(This special issue belongs to the Section Materials Simulation and Design)

Artificial Intelligence in the Design and Innovation of High-Performance Concrete Materials

edited by

Chuanqi Li

and

Xiancheng Mei

submission deadline 20 Jun 2026 | Viewed by 368 | Submission Open

Keywords: artificial intelligence; high-performance concrete; material design; machine learning; data analysis; optimization algorithms; sustainability; intelligent production

(This special issue belongs to the Section Materials Simulation and Design)

Research on Corrosion Behavior of Metallic Materials

edited by

Juan Ignacio Ahuir-Torres

submission deadline 20 Jun 2026 | 1 articles | Viewed by 267 | Submission Open

Keywords: corrosion; metallic materials; electrochemistry; additive manufacturing; corrosive environments; tribocorrosion; corrosion inhibitor; corrosion at heat temperature

(This special issue belongs to the Section Corrosion)

Experimental Testing and Numerical Modelling for Structural Dynamics

edited by

Chao Xu

and Zexing Yu

submission deadline 20 Jun 2026 | Viewed by 225 | Submission Open

Keywords: experimental techniques; computational methods; nonlinear structural dynamics; stochastic dynamics and uncertain systems; dynamic model validation; vibration control; smart materials and structures; dynamic sensors and actuators; energy harvesting; structural health monitoring; load identification and monitoring; dynamics of jointed structures

(This special issue belongs to the Section Materials Simulation and Design)

Advances in Cementitious Materials: Properties, Microstructure and Applications

edited by

Fengyin Du

and Linfei Li

submission deadline 20 Jun 2026 | Viewed by 208 | Submission Open

Keywords: cementitious materials; microstructure optimization; sustainability; durability; functionality; advanced applications

(This special issue belongs to the Section Construction and Building Materials)

Advanced Materials for Sustainable Industry 5.0

edited by

Dominika Siwiec

and

Andrzej Pacana

submission deadline 20 Jun 2026 | Viewed by 200 | Submission Open

Keywords: quality; quality management; multi-criteria decision making (MDCM); lean manufacturing (LM); life cycle assessment (LCA); environmental management instruments; sustainable development; Industry 5.0; improving products; production engineering

(This special issue belongs to the Section Manufacturing Processes and Systems)

Progress in Nuclear Material Simulation Research

edited by

Yujuan Zhang

and Wenting Lv

submission deadline 20 Jun 2026 | Viewed by 197 | Submission Open

Keywords: nuclear material simulation; irradiation behavior modeling; radionuclide separation; nuclear waste management; actinide-based materials

(This special issue belongs to the Section Materials Simulation and Design)

Mechanics of Sustainable Engineering Materials: Performance, Degradation and Applications

edited by

Xu Long

, Xindang He and Tang Gu

submission deadline 20 Jun 2026 | Viewed by 163 | Submission Open

Keywords: sustainable engineering materials; resource-efficient material design; mechanical reliability; wear and tribology; degradation and durability; structural integrity; failure and damage analysis; service performance prediction; microstructure– property relationship; multiscale modeling

(This special issue belongs to the Section Mechanics of Materials)

Advanced Materials in Acoustics and Vibration

edited by

Qibai Huang

, Chongrui Liu,

Zhifu Zhang

and

Yizhe Huang

submission deadline 20 Jun 2026 | Viewed by 160 | Submission Open

Keywords: metamaterials; composite materials; smart materials; biomaterials; porous materials; viscoelastic material; functional gradient materials

(This special issue belongs to the Section Materials Physics)

Acoustic Materials: From Fundamental Design to Advanced Applications

edited by

Luís Godinho

and

Paulo Amado-Mendes

submission deadline 20 Jun 2026 | Viewed by 124 | Submission Open

Keywords: sound absorbing materials; advanced noise reduction systems; acoustic metamaterials; porous and fibrous materials; sustainable acoustic materials; multifunctional composites and systems; theoretical and empirical material models; numerical modelling of materials; high-performance advanced application

(This special issue belongs to the Section Construction and Building Materials)

Journal Menu

Journal Browser

Special Issues

Further Information

Guidelines

MDPI Initiatives

Follow MDPI