45 Results Found

Three quinary polar intermetallic compounds in the (Eu1−xCax)9In8(Ge1−ySny)8 (x = 0.66, y = 0.03) and the (Eu1−xCax)3In(Ge3-ySn1+y) (x = 0.66, 0.68; y = 0.13, 0.27) phases have been synthesized using the molten In-metal flux method, and the crystal s...

Combustion-assisted flame spraying (CAFSY) is a novel method that allows in-flight synthesis of alloys during flame spraying. The in-flight synthesis of alloys by the CAFSY method during flame spraying combines two different methods: the self-propaga...

The crystal structures of three new ternary compounds, NaCd0.92Sn1.08 (I), Na(Cd0.28Sn0.72)2 (II), and Na2CdSn5 (III) synthesized in a sodium-cadmium-tin system were determined by single-crystal X-ray analysis to be the following: (I) LiGeZn-type str...

Investigations of the system Ba–In–Sn, with the objective to synthesize Ba8In16Sn30 clathrate using Sn and In flux reactions, yielded instead the known BaSn3 compound (P63/mmc; a = 7.228(2) Å, c = 5.469(3) Å) from Sn flux and its In-doped variant BaS...

Two new fully ordered ternary Laves phase compounds, Ca2Pt3Ga and Ca2Pd3Ga, have been synthesized and characterized by powder and single-crystal X-ray diffraction along with electronic structure calculations. Ca2Pd3Ga was synthesized as a pure phase...

Although the electronic structures of several tellurides have been recognized by applying the Zintl-Klemm concept, there are also tellurides whose electronic structures cannot be understood by applications of the aforementioned idea. To probe the app...

The quest for solid-state materials with tailored chemical and physical features stimulates the search for general prescriptions to recognize and forecast their electronic structures providing valuable information about the experimentally determined...

The electrochemical behavior of dysprosium ions, as well as dysprosium and nickel ion co-reduction, on inert tungsten electrodes and active nickel electrodes were studied in the eutectic KCl-NaCl-CsCl melt at a temperature of 823 K using the methods...

Among the high entropy or complex concentrated alloys (HEAs/CCAs), one type of system is commonly based on CoCrFeNi, which as an equiatomic quaternary alloy that forms a single phase FCC structure. In this work, the effect of Sn in an equiatomic quin...

The binary intermetallic clathrates K8-xSi46 (x = 0.4; 1.2), Rb6.2Si46, Rb11.5Si136 and Cs7.8Si136 were prepared from M4Si4 (M = K, Rb, Cs) precursors by spark-plasma route (SPS) and structurally characterized by Rietveld refinement of PXRD data. The...

In this study, two novel Lu5Pd4Ge8 and Lu3Pd4Ge4 polar intermetallics were prepared by direct synthesis of pure constituents. Their crystal structures were determined by single crystal X-ray diffraction analysis: Lu5Pd4Ge8 is monoclinic, P21/m, mP34,...

A method of forming an Mg/Al intermetallic compound coating enriched with Mg17Al12 and Mg2Al3 was developed by heat treatment of electrodeposition Al coatings on Mg alloy at 350 °C. The composition of the Mg/Al intermetallic compounds could be tuned...

The objective of this work was to test vanadium isopolyoxoanions as potential corrosion inhibitors of the intermetallic phase Al2Cu in sulfuric acid solutions at pH = 1.3 and 2.5. The intermetallic was melted in an electric arc furnace. Its phase com...

Mg-Zn alloys are a promising type of biodegradable material for orthopedic devices, combining the natural advantages of Mg with the properties provided by Zn. This study examines how temperature affects the behavior of three MgxZn alloys (x = 1.4: 6....

The new ternary amalgam CsNa2Hg18 was synthesised from the elements in an unconventional low-temperature procedure. It crystallises in a tetragonal structure type (space group I4/mmm, a = 7.3054(7) and c = 20.046 Å) and combines ionic and metal...

Duplex stainless steel has significantly broadened the range of applications of stainless steel. They have a dual-phase microstructure containing ferrite and austenite at approximately a 50–50% phase ratio. Their corrosion resistance is much be...

Titanium and Zircaloy-4 dissimilar alloys were brazed with a zirconium-titanium-copper-nickel amorphous filler alloy, and the resulting joint structures as well as their corrosion properties were examined. The microstructure of the brazed joints was...

To improve the Al/Steel bimetallic interface, Eu was firstly added to the Al/Steel bimetallic interface made by liquid-solid casting. The effects of Eu addition on the microstructure, mechanical capacities, and rupture behavior of the Al/Steel bimeta...

In this paper, the microstructures and corrosion behaviors of as-cast Mg–5Sn–xGa alloys with varying Ga content (x = 0, 0.5, 1, 2, 3 wt %) were investigated. The results indicated that Ga could not only adequately refine the grain structu...

The corrosion behavior was investigated for three Al-Mg aluminum alloys (i.e., 5052, 5083 and 5182 aluminum alloys) with different alloying contents in 3.5 wt.% NaCl solution at 35 °C by means of potentiodynamic polarization, electrochemical impe...

Al-x wt.% Fe bulk alloys were fabricated from a powder mixture of pure Al and x wt.% of Fe, where x = 2 wt.%, 5 wt.% and 10 wt.%. Initially, as-mixed mixtures were processed using a mechanical-alloying (MA) technique in an attritor for 4 h. The milli...

In the field of degradable metals, Zn-based implants have gradually gained more attention. However, the relatively slow degradation rate compared with the healing rate of the damaged bone tissue, along with the excessive Zn2+ release during the degra...

The effects of Si addition on the precipitation hardening behaviour and evolution of intergranular corrosion (IGC) of Al-Mg-Si alloys were investigated using hardness tests, scanning electron microscopy (SEM), potentiodynamic polarization measurement...

Exploratory synthesis in the area of polar intermetallics has yielded a rich variety of structures that offer clues into the transition in bonding between Zintl and Hume-Rothery phases. In this article, we present a bonding analysis of one such comp...

In industrial applications, welding of dissimilar metals such as aluminum (Al) and titanium (Ti) is a prerequisite for the development of hybrid components with improved mechanical and corrosion properties. However, dissimilar welding of the Al/Ti sy...

The aim of this study was a systematic analysis of the influence of anions (chloride and sulfate) on the electrochemical behavior of the Co-Sn system during codeposition from gluconate baths. The pH-dependent multiple equilibria in cobalt–tin b...

To solve the electromigration problem of micro−electronic connection solder joints, an ideal electromigration tester was designed, and the thickness of the intermetallic compounds (IMCs), average void diameter, grain orientation, failure, shear...

This study examines the microstructure and corrosion resistance of FeCrNiAl0.7Cu0.3Six (x = 0, 0.1, 0.3, and 0.5) high-entropy alloys (HEAs) in a 3.5% NaCl solution. X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive spect...

This investigation is focused on the corrosion evaluation of an as-cast Al-Si alloy, obtained by two different casting methods: traditional sand casting and three-printing casting, using a binder jetted mold. The experimental results are discussed in...

The addition of beryllium (Be) to Al–Cu alloys enhances their mechanical properties and corrosion resistance. This study aims to investigate the effects of solidification cooling rates and the addition of Be on the microstructural refinement an...

This study investigates the effect of copper (Cu) and silver (Ag) additions on the electrochemical behavior of the Fe40Al intermetallic alloy in artificial saliva, aiming to evaluate its potential for biomedical applications such as dental implants....

Magnesium-containing multi-principal element alloys (MPEAs) are promising for lightweight applications due to their low density, high specific strength, and biocompatibility. This study examines two Mg-Ti-Zn alloy compositions, equal molar MgTiZn (TZ...

The objective of this study is to investigate the effect of long-term aging on electrochemical corrosion characteristics of austenitic AISI 304 steel. AISI 304 steel was subjected to aging treatment for an extended period at 700 °C up to a maximu...

The corrosion behaviors of newly developed solder alloys with excellent mechanical properties, Sn-2.5 Ag-1.0 Bi-0.8 Cu-0.05 Ni (SABC25108N) and Sn-1.5 Bi-0.75 Cu-0.065 Ni (SBC15075N), are analyzed to supplement the corrosion behavior of the limited c...

The aim of this study concerns the effect of multi-pass shielded metal arc welding (SMAW) on the corrosion behavior of CW6MC cast nickel alloy. Using optical and SEM techniques the welded joint is analyzed. Vickers microhardness mapping and potentiod...

In this study, lanthanum (La), a rare earth element, was added at concentrations of 0.25 wt.%, 0.5 wt.%, and 0.75 wt.% to an Al–10%Si–2%Cu-based alloy prepared by die casting. The effects of solution and aging heat treatment conditions on...

The stress-shielding effect is a phenomenon in which the mutual coupling between bones and bio-materials of the human body is loosened due to the difference in elastic modulus, and bone absorption occurs due to the difference in density, which causes...

Ni-Mo-ZrO2 composite coatings were produced by pulse electrodeposition technique from alkaline electrolytes containing dispersed ZrO2 nanopowder. The structure, microhardness, corrosion properties and tribological properties of Ni-Mo-ZrO2 composites...

The corrosion behavior of Fe-containing directionally solidified (DS) and centrifugally cast (CC) Al-Si-Cu-Zn alloys with either Co or Ni additions has been investigated. Electrochemical and immersion corrosion methods were used to investigate the co...

Super duplex stainless steels (SDSS) are materials known for their exceptional mechanical strength and high resistance to corrosion due to their dual- phase microstructure consisting of ferrite and austenite in roughly equal proportions. However, the...

Electromigration (EM) presents a major reliability challenge in advanced electronic packaging as device scaling and rising power demands lead to higher current densities in solder joints. While eutectic Sn-58Bi solder is widely adopted as a low-tempe...

Magnesium-based alloys hold potential for medical applications, but face challenges like rapid bioresorption and limited mechanical strength during early bone healing. In our study, we present a novel Mg–Zn–Zr–Ce alloy with low ceri...

Aluminum alloys are extensively used to manufacture mechanical components. However, when exposed to alkaline environments, like lubricants, refrigerants, or detergents, they can be corroded, reducing their durability. For this reason, the aim of this...

In this study, Al/5 Ni/0.2 GNPs/x SiC (x = 5, 10, 15, and 20 wt%) nanocomposites were constituted using the powder metallurgy–hot pressing technique. The SiC particles and GNPs were coated with 3 wt% Ag using the electroless deposition technique then...

The continuous substitution of tin by lead (M IV ) allows for the exploration geometric criteria for the stability of the different stacking variants of alkaline-earth tri-tetrelides A II M 3 IV . A series of ternary Sr and Ba mixed...