At the steelmaking temperature, carbon has a strong deoxidation ability. Under the vacuum condition, its deoxidation ability can be further improved, and it can become a stronger deoxidation element than aluminum. The product of carbon deoxygenation...
Bio-hydrogenated diesel (BHD), derived from vegetable oil via hydrotreating technology, is a promising alternative transportation fuel to replace nonsustainable petroleum diesel. In this work, a novel Pt-based catalyst supported on N-doped activated...
Atmospheric pressure plasma jets (APPJ) are widely used in industry for surface cleaning and chemical modification. In the recent past, they have gained more scientific attention especially in the processing of carbon nanomaterials. In this work, a n...
Recently, the catalytic upgrading of bio-oil to renewable diesel has been attracting more and more attention. In the current paper, carbon nanotube (CNT)-supported nickel catalysts, namely, 5% Ni/CNTs, were prepared for liquid hydrocarbon production...
Renewable diesels (e.g., biodiesel and green diesel) have emerged as a sustainable alternative to petrodiesel as a means of meeting the growing demand for fuel without damaging the environment. Although renewable diesels are composed of different che...
The extensive release of carbon dioxide (CO2) into the atmosphere is associated with the detrimental impacts of the global environmental crisis. Consequently, the valorization of CO2 from industrial processes holds great significance. Transforming CO...
Microalgae is one of the most important sources of green hydrocarbons because it contains a high percentage of lipids and is likely to reduce reliance on fossil fuels. Several zeolite-based catalysts have a short lifetime due to coke-formation deacti...
To address the greenhouse effect and environmental pollution stemming from fossil fuels, the development of new energy sources is widely regarded as a critical pathway toward achieving carbon neutrality. Microalgae, as a feedstock for third-generatio...
In this work, the deoxygenation of organic liquid products (OLP) obtained through the thermal catalytic cracking of palm oil at 450 °C, 1.0 atmosphere, with 10% (wt.) Na2CO3 as a catalyst, in multistage countercurrent absorber columns using super...
Electrospun poly(acrylonitrile) (PAN) nanofibers are typical precursors of carbon nanofibers. During stabilization and carbonization, however, the morphology of pristine PAN nanofibers is not retained if the as-spun nanofiber mats are treated without...
The significance and challenges of hydrotreatment processes for vegetable oils have recently become apparent, encompassing various reactions like decarbonylation, decarboxylation, and hydrogenation. Heterogeneous noble or transition metal catalysts p...
Hydrodeoxygenation (HDO) is one of the most promising approaches to upgrading pyrolysis oils, but this process normally operates over expensive noble metal catalysts (e.g., Ru/C, Pt/Al2O3) under high-pressure hydrogen gas, which raises processing cos...
This review provides insights into the current research on pyrolytic bio-oil obtained from different feedstock regarding upgrading techniques and applications such as energy, fuels, chemicals, and carbon materials. Raw bio-oil is not appropriate for...
The main objective of the manuscript is to investigate mild hydrotreatment upgrading of hydrothermal liquefaction biocrude to improve its stability and energy content. To that end, biocrude hydrotreatment was performed, exploring three different oper...
The concomitant hydrolysis and dehydration of biomass-derived cellulose and hemicellulose to furfural (FUR) and 5-(hydroxymethyl)furfural (HMF) under acid catalysis allows a dramatic reduction in the oxygen content of the parent sugar molecules with...
Pyrolysis process has been considered to be an efficient approach for valorization of lignocellulosic biomass into bio-oil and value-added chemicals. Bio-oil refers to biomass pyrolysis liquid, which contains alkanes, aromatic compounds, phenol deriv...
In the present study, the protein-extracted grass residue (press cake) was processed through hydrothermal liquefaction under sub and supercritical temperatures (300, 350 and 400 °C) with and without using a potassium carbonate catalyst. The resul...
Waste cooking oil (WCO) from palm oil is one of the most prospective biodiesel feedstock when compared to other oil seeds. Thus, WCO has great potential as a green source of diesel fuel for engines in motor vehicles and machinery. This project aimed...
Biofuels as alternative fuels in today’s world are becoming increasingly important for the reduction of greenhouse gases. Here, we present and evaluate the potential of a new alternative fuel based on the conversion of medium-chain fatty acids...
The products generated from a fixed bed pyrolysis unit of solid waste materials were quantitatively characterized, and their energy potential was determined, in order to evaluate their suitability as energy sources. An elemental analyzer, a bomb calo...
Despite the extensive research into the catalytic uses of zeolite-based catalysts, these catalysts have a limited useful lifetime because of the deactivating effect of coke production. This study looks at the use of Cerium (Ce) loaded HZSM-5 zeolite...
Lignin is considered a renewable source for the production of valuable aromatic chemicals and liquid fuel. Solvent depolymerization of lignin is a fruitful strategy for the valorization of lignin. However, Kraft lignin is highly prone to produce char...
The growing demand for air connectivity, coupled with the forecasted increase in passengers by 2040, implies an exigency in the aviation sector to adopt sustainable approaches for net zero emission by 2050. Sustainable Aviation Fuel (SAF) is currentl...
Meat color is the most intuitive measure of meat quality and has a significant impact on consumer preference. To explore the molecular mechanisms affecting duck pectoralis meat color, the phenotypic traits of Cherry Valley duck (CV, eight males and e...
Abundant studies have been completed about factors on the pyrolysis of coal and biomass. However, few articles laid emphasis on using CO2 as a carrier gas to explore the compositional changes of pyrolysis products in coal and biomass pyrolysis for in...
This study used the subcritical hydrothermal liquefaction technique (SHLT) in the co- liquefaction of process rejects at a wastepaper-based paper mill (PRWPM) and waste soybean oil (WSO) for the production of biofuels and bio-char material. PRWPM emi...
Bio-oil produced via fast pyrolysis, irrespective of the biomass source, faces several limitations, such as high water content, significant oxygenated compound concentration (35–40 wt.%), a low heating value (13–20 MJ/kg), and poor miscib...