An ordered ω-Al4Cr phase synthesized recently by a high-pressure sintering (HPS) approach was calculated to be stable by density function theory (DFT), implying that high pressure can accelerate the disorder-order phase transitions. The structu...
Physical vapor deposition (PVD) coatings could affect the friction performance at the contact interface between Ti2AlNb alloy parts and tool couples. Suitable coating types could improve the friction properties of Ti2AlNb alloy while in contact with...
Cr2AlB2 and Cr4AlB4 are members of the MAB phases that exhibit unique properties of both metals and ceramics. However, despite these unique characteristics, Cr2AlB2 and Cr4AlB4 phase coatings have not been widely investigated. In this study, Cr2AlB2...
AlCr-based hard nitride coatings with different chemical compositions and architectures have been successfully developed and applied over the last few decades. Coating properties are mainly influenced by deposition conditions and the Al/Cr content. T...
In the present work, for the first time, the possibility of formation of CrAl2O4 was shown from the equimolar mixture of co-precipitated Al2O3 and Cr2O3 oxides under a reductive environment. The crystallographic properties of the formed compound were...
The paper presents results of the investigation of the AlCrN and AlCrN + CrCN coatings, deposited by arc evaporation method on the austenitic steel substrate. Topography studies performed with the use of AFM showed that the roughness value was 24 nm...
The high chemical activity, low thermal conductivity, and high strength of titanium alloys lead to severe tool wear during cutting. The coating applied to the tool surface insulates the effect of heat and chemical reactions. TiAlSiN coating and AlCrN...
TiAl alloys are used in high-temperature components such as the turbine blades of aeroengines because of their excellent properties. However, TiAl alloys are prone to thermal corrosion when in near-ocean service. In order to solve this problem, a hot...
A nano-multilayer Ti0.2Al0.55Cr0.2Si0.03Y0.02N/Ti0.25Al0.65Cr0.1N PVD coating was deposited on Kennametal carbide K 313 inserts. These coatings are widely used to protect cutting tools under severe exploitation conditions. Under equilibrium condition...
AlCrN and AlCrSiN coatings were deposited via reactive magnetron sputtering. This study investigates the effects of radio frequency (RF) substrate bias, ranging from 0 V to 200 V, on the chemical composition, microstructure, and mechanical properties...
The FeCrAl alloy system is recognized as one of the candidate materials for accident-tolerant fuel (ATF) cladding in the nuclear power industry due to its high oxidation resistance under irradiation and high-temperature environments. The concentratio...
The impact wear resistance of the hard coating is very important in the high-temperature environment of the nuclear power plant. CrN and CrAlN coatings were prepared using multi-arc ion plating. The impact abrasive wear resistance of the coatings was...
Cavitation resistance in hydraulic machinery requires the turbine and water pump surface to simultaneously possess high hardness and plasticity. To keep the FCC structure of the AlxCoCrFeNi alloy matrix and introduce the particle strengthening effect...
This study employed arc ion plating technology to deposit CrAlN/CrN coatings on stainless steel substrates, adjusting deposition pressures ranging from 1.0 Pa to 4.0 Pa. A detailed analysis of the coatings’ microstructure, wear, and corrosion f...
This study focuses on a comparative analysis of AlCrXN (X = Mo or V) coatings with the reference AlCrN coating via arc ion plating technique (AIP). The XRD and XPS results showed that the AlCrXN coatings were mainly composed of fcc-(Cr,Al)N solid sol...
We investigated arc ion-plated Al70Cr30N and Al80Cr20N thin films deposited with three different bias voltages (50 V, 100 V, and 150 V) to study crystal phase stabilities, residual stresses, and mechanical properties. Commercial compositions of AlxCr...
In this study, the oxidation behavior of Al coated NiCrAlY bondcoat is investigated. It is known that many methods are applied to improve the lifetime of bondcoat in thermal barrier coatings. Herein, the Al sputtering method is selected to increase t...
The oxidation behaviors of Cr, Cr93.4Al6.6, Cr58.1Al41.9, and Cr34.5Al65.5 coatings, deposited by using multi-arc ion plating technology, at high temperature were studied. The weight gain, oxide thickness, morphology, and phase composition of the coa...
The application of 7050 aluminum alloy in high-friction environments is limited due to its insufficient surface wear resistance. This study aims to enhance its wear resistance by depositing Cr/(Zr,Cr)N/(Zr,Cr,Al)N multilayer composite coatings using...
Cutting tools have long been coated with an AlCrN hard coating system that has good mechanical and tribological qualities. Boron (B) and vanadium (V) additions to AlCrN coatings were studied for their mechanical and tribological properties. Cathodic...
The increasing demand for high-performance aircraft engines has led to a greater emphasis being placed on advanced sealing coating technologies. Developing long-life, self-lubricating, and wear-resistant coatings is of significant research value. Thi...
This paper presents the results of corrosion resistance tests of materials (Fe40Al5Cr0.2ZrB alloy and X18CrN28 steel) in a 5% NaCl solution at room temperature using electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization, compl...
The AlCrN and AlCrON coatings were deposited on plasma nitrided H13 steels through ion-source-enhanced arc ion plating, and their structures, mechanical properties, thermal stabilities, and tribological properties were investigated. Structural analys...
Chromium–aluminum nitride (CrAlN) coatings were deposited on polished H13 tool steel substrates using direct current (DC) magnetron sputtering. The Cr/Al composition in the target was varied by inserting either four or eight chromium (Cr) plugs...
High velocity arc spraying was used to prepare FeCrAl/Al composite coating on Q235 steel substrate by simultaneously spraying FeCrAl wire as the anode and Al wire as the cathode. The composite coating was sprayed with varying voltage and current to o...
Al-Cr-N ternary coatings were deposited on the surface of Cr12MoV alloy tool steel via multiarc ion plating technology. The microstructure and mechanical and tribological properties of these coatings were systematically characterized, analyzed, and c...
In this article, the structure formation and phase composition of coatings containing Cr2AlC MAX phase under the conditions of plasma spraying were studied. Mechanical mixtures of commercially available Cr3C2 and Al powders were used as a material fo...
In this paper, a brake cylinder coating comprising composite material of Fe3Al and Cr3C2 mixed powder was prepared by laser cladding onto carbon structural steel. The microstructure of the cladding materials was investigated through X-ray diffraction...
Intermetallic compounds formed during heat treatment of alloy coatings affect the coating structure and properties. In order to determine the phase changes and coating performance, FeCrAl (Fe Bal., Cr 26 wt.%, Al 6 wt.%) and Al (99.9 wt.%) coating wa...
In this study, the microstructure and electrochemical and passive characteristics of NiCr25.2−xMoAlx (x = 0, 1.25, 2.5, and 5 mol.%) alloys were investigated. The results show that Ni-Cr-Mo-Al alloys with varying Cr:Al ratios both had a single...
Cermet coatings with ceramic and metal characteristics will play an increasingly important role in extending the service life of critical components in harsh service environments. In this paper, CoCrAlTaY-30Al2O3 (wt.%) cermet coating was prepared by...
In this study, the CoCrAlYTa-10%Al2O3 coatings were prepared by the high-velocity oxygen-fuel (HVOF) spraying. A series of ball-on-disk sliding wear tests were conducted to evaluate the tribological properties of the coatings at different temperature...
TiAlSiN and AlCrN coatings are two representative coatings with excellent properties in TiN-based and CrN-based coatings, respectively. Multilayering is one of the most important directions for coating performance optimization. In this paper, nanosca...
High-entropy alloys are of interest to many researchers due to the possibility of shaping their functional properties by, among other things, the use of alloying additives. One approach to improving the wear resistance of the AlCoCrFeNi alloy is modi...
A protective oxide film is the key to the corrosion resistance of the FeCrAl alloy. The mechanism of the formation of the multilayer oxide film of the FeCrAl alloy in 700 °C air was explored by studying the structure evolution of the oxide film a...
This article presents a comprehensive study of the mechanical and tribological properties of detonation coatings in the NiCr-Al system. Using the detonation spraying technology, NiCr-Al homogeneous (HC) and gradient coatings (GCs) were produced, and...
Interest in composite thick coatings with an intermetallic matrix stimulates the development of new deposition techniques like the co-milling of pre-alloyed NiAl powder with platelet-shaped substrates. Obtained coatings were up to several micrometers...
A CrN/AlCrN coating was prepared on a carbide substrate and PCB milling cutter by the cathodic arc ion plating technique. The organization, mechanical and tribological properties of the coating were studied. The milling performance of the coated mill...
Seven FeCrAlY-Al2O3 nanoceramic composite coatings are deposited on F/M steel via plasma spraying and laser remelting. A systematic investigation is conducted to examine the dependence of microstructure, mechanical properties, and lead–bismuth...
It is important to improve the liquid lead corrosion resistance of fuel cladding alloy for promoting the development of lead-based reactors. The corrosion behaviors of traditional T91 steel and similar oxide dispersion strengthen ODS-type steels with...
The effects of chromium (Cr) addition ranging 0.1–0.3 wt.% on the microstructure and mechanical properties of Al–7Si–4Cu–0.25Mg (wt.%) alloy have been investigated. The cast Cr-free alloy consisted of α-Al, eutectic Si,...
In the metalworking industry, different processes and applications require the utilisation of custom designed tools. The selection of the appropriated substrate material and its pre-treatment as well as the protective coating are of great importance...
Cr–Al alloys are attracting much attention as heat- and corrosion-resistant coating materials due to their excellent high-temperature properties. In order to investigate the effect of aluminum content on the microstructure and oxidation resista...
In this study, the microstructural evolution of an Fe-Cr-Al system was simulated in two-dimensional (2D) and three-dimensional (3D) systems using the phase-field method. We investigated the effect of Al concentration on the microstructural evolution...
In this study, five AlTiCrN nitride coatings were deposited via high-power impulse magnetron sputtering (HiPIMS). The AlTiCrN coatings were synthesized with high contents of Al or Ti and a lower fraction of Cr, using Ti and Al70Cr30 targets with five...
Three low‐carbon bainitic steels were designed to investigate the effects of Cr and Al addition on bainitic transformation, microstructures, and properties by metallographic method and dilatometry. The results show that compared with the base steel w...
In this paper, an engine piston ring coating comprising composite material of Fe3Al and Cr3C2 mixed powder was prepared by laser cladding onto carbon structural steel. The microstructure and tribological properties of the cladding materials were inve...
The effect of cooling rate on the evolution of AlN inclusions precipitated during solidification in FeCrAl stainless steel was investigated using an experimental study and thermodynamic and kinetic calculations. The number and size of AlN inclusions...
This research focuses on the structural and bonding characteristics of the Al(111)/CrB2(0001) interface, aiming to clarify the adhesion mechanisms of CrB2 coatings on aluminum composites. Utilizing first-principles calculations grounded in density fu...
TiCrAlN hard films based on TiN or CrN show superior properties in terms of hardness, wear resistance, and thermal stability due to the addition of alloying elements. AlCrTiN films based on AlN may have higher thermal shock properties, but the knowle...
of 60