2022 June - 125 articles
This work introduces the CoarseAIR™, a novel system utilizing a three-phase fluidized bed and a system of inclined channels to facilitate coarse particle flotation and internal size classification. Internal classification in the CoarseAIR™ was invest...
The porosity distribution law of overlying strata in the goaf has an important guiding role in distinguishing hidden disaster-causing factors in the goaf, such as the gas enrichment area and spontaneous combustion area. Existing research is concentra...
Geoenvironmental models were formulated by the U.S. Geological Survey in the 1990s to describe potential environmental effects of extracting different types of ore deposits in different geologic and climatic regions. This paper presents a geoenvironm...
Lower Cambrian Xiaoerblak Formation is one of the major exploration targets in Cambrian pre-salt Tarim Basin; however, the exploration breakthrough is restricted by insufficient understanding of its sedimentary evolution and reservoir genesis. In thi...
The recovery factor in unconventional reservoirs is typically 5–10%, with extensive hydraulic fracturing and infill drilling to maintain the production rate. Concurrently, the rush towards decarbonization is opening up new possibilities for CO2...
Radiation phenomena are usually observed during fracture of quartz-bearing rocks. Since quartz is a piezoelectric material, the associated electrical processes such as the electrification of fracture surface and the flight of electrons between fractu...
Between 2004 and 2018, NASA’s rover Opportunity found huge numbers of small, hematite-rich spherules (commonly called blueberries) on the Meridiani Planum of Mars. The standard oxide composition distributions of blueberries have remained poorly...
Clinopyroxene and olivine primocrysts in the intrusions of the Ponte Nova mafic–ultramafic alkaline massif (SE Brazil) present several textures and zoning that indicate open-system processes. Important compositional differences were found in th...
Shale reservoirs, the most important unconventional resource, are difficult to characterize. Shale formations require detailed interpretation of geological, petrophysical, and geochemical analyses, and an integration of these disciplines. In terms of...
Semi-autogenous (SAG) mills are widely used grinding equipment, but some ore with critical particle sizes cannot be effectively processed by SAG mills and turned into pebbles. This research aims to analyze and compare the properties of raw ore and pe...
Clogging is inevitable when membranes with 0.45 µm pore size are used for the separation of particulates from dissolved/colloidal forms in river water. This can lead to a shift in water quality assessment and evaluation of geochemical fluxes. W...
Bentonite is a claystone formed by a complex mineralogical mixture, composed of montmorillonite, illite, and accessory minerals like quartz, cristobalite, feldspars, carbonates, and minor amounts of iron oxy-hydroxides. Bentonite presents complexity...
Jinling complex pluton is a key part of the Mesozoic magmatic belt in the eastern North China Craton. However, its petrogenesis is still being debated. The Jinling complex, mainly composed of biotite diorites, hornblende diorite, augite diorites, (qu...
The bedrock used for underground construction has obvious traces of hydrodynamic scouring damage, and the mechanical properties of bedrock especially are severely damaged under a groundwater environment. On this basis, considering the excavated bedro...
The Shangfanggou Mo–Fe deposit is a typical and giant porphyry–skarn deposit located in the East Qinling–Dabie molybdenum (Mo) polymetallic metallogenic belt in the southern margin of the North China Block. In this paper, three-dime...
We studied the mineralization and sulfur isotopic composition of sulfides of gold–palladium ores in olivine clinopyroxenites from the Dzelyatyshor massif made up of a continuous layered series of rocks: olivine-free clinopyroxenite–olivin...
The formation of the Qaidam Basin plays an important role in unraveling the growth history of the Tibetan plateau. An extraordinary thick Cenozoic sedimentary succession of the Qaidam Basin is a great contributor to the study of the basin’s evo...
The zinc in the fayalite slag of copper smelters, in which Zn-containing raw materials are used, is mainly found to be in oxidic phases, such as glassy iron silicate. During the slag water granulation process, the molten slag is heated, whereby the g...
The magnetotelluric (MT) method is widely applied in petroleum, mining, and deep Earth structure exploration but suffers from cultural noise. This noise will distort apparent resistivity and phase, leading to false geological interpretation. Therefor...
The aim of this study is to investigate the oxalic acid activation of bentonites containing different types of smectites, analyse their surface modification as a function of acid concentration and create good quality bleaching earths. In particular,...
The cemented backfill (CB) utilizing coal gangue (CG) and fly ash (FA) is widely applied in coal mines. However, the bleeding and shrinkage of CB leads to insufficient contact with surrounding rock, which is not beneficial for controlling roof subsid...
The cassiterite–sulfide mineralization occurs within quartz veins and greisenized Precambrian Older Granite around the Gindi Akwati region at the Ropp complex’s western boundary, north-central Nigeria. The intrusion of Jurassic Younger gr...
Magmatic processes in the active continental margins are one of the important issues to understand the evolution of the continental crust. The Cretaceous Susuma–Nagaho plutonic complex, southwest Japan, is situated at the continental arc, and m...
Findings of Iron Age metallurgical activities related to tin metal and mining are very rare. In the present work, we present a detailed study of the Outeiro de Baltar hillfort, dated to the Late Iron Age/Early Roman period, located in a place where 2...
Carbon geo-sequestration (CGS), as a well-known procedure, is employed to reduce/store greenhouse gases. Wettability behavior is one of the important parameters in the geological CO2 sequestration process. Few models have been reported for characteri...
In recent years, the extinct nuclide 182Hf-182W system has been developed as an essential tool to date and trace the lunar origin and evolution. Despite a series of achievements, controversies and problems exist. As a review, this paper details the a...
Understanding the temporal effects of organic matter input and water influx on metal lability and translocation is critical to evaluate the success of the phytostabilization of metalliferous mine tailings. Trends of metal lability, e.g., V, Cr, Mn, C...
A complete series of the calcite–otavite solid solutions [(Ca1−xCdx)CO3] were prepared, and their dissolution processes lasting nine months were experimentally investigated. For the dissolution in the N2-degassed water, the Ca concentrati...
The cost, complexity, lack of filling space and time create challenges in the longwall backfill operation, resulting in poor subsidence control and reduced productivity. This paper proposes an automated continuous mining and continuous backfill (CMCB...
Natural minerals and earths with coloring properties have been widely used as artistic pigments since prehistoric times. Despite being extensively studied, the complex chemistry of earth pigments is still unsatisfactory described with respect to thei...
A short-term side-effect of CO2 injection is a developing low-pH front that forms ahead of the bulk water injectant, due to differences in solute diffusivity. Observations of downhole well temperature show a reduction in aqueous-phase temperature wit...
Lithium-ion batteries (LIBs) are dangerous to recycle, as they pose a fire hazard when cut and contain various chemical hazards. If recycled safely, LIBs provide a rich secondary source for metals such as lithium and cobalt, while reducing the enviro...
The Mesozoic Xuefengshan Orogen (XFSO) in South China hosts abundant gold ore deposits. The XFSO records a history of polyphase tectonic deformation and the structural controls on gold mineralization are poorly understood. The recently discovered qua...
Global sensitivity analysis (GSA) is a fundamental tool for identifying input variables that determine the behavior of the mathematical models under uncertainty. Among the methods proposed to perform GSA, those based on the Sobol method are highlight...
The Hetaoping ore district in Baoshan City, Yunnan Province, is one of the major localities of Pb-Zn polymetallic skarn deposits in China, where geophysical and geochemical surveys play an important role in exploring Pb-Zn polymetallic mineral resour...
The problem of spent fluid catalytic cracking (SFCC) catalyst resource utilization, draws more and more attention to system analysis. SFCC was leached in an oxalic solution for comprehensive utilization. The results showed that for a D50 ≤ 17.34 &...
A geoenvironmental assessment methodology was developed to estimate waste quantities and disturbances that could be associated with the extraction of undiscovered uranium resources and identify areas on the landscape where uranium and other constitue...
The stability of surrounding rock is the basic guarantee of underground space engineering safety. The large deformation of a roadway’s surrounding rock is a very common phenomenon during the underground excavation of coal mine roadways or coal...
Considering the shortcomings of the currently used time functions for dynamically predicting surface mining subsidence and calculating its parameters, a novel time function is proposed on the basis of an in-depth analysis on the movement characterist...
The Great Altai region, located at the boundary of Russia, Mongolia, China, and Kazakhstan, belongs to the system of the Central Asian Orogenic Belt. It has undergone a long complex geological and metallogenic history. Extremely rich resources of bas...
The operational conditions, including temperature and gas composition, vary along the radial position in a blast furnace. Nevertheless, very few studies can be found in the literature that discuss how the reduction behavior of the ferrous burden vari...
The presence of aluminum in the weathering crust leaching rare earth ore harms the subsequent extraction and separation of rare earths. High-quality rare earth production processes must reduce the aluminum content in their feed liquid. Groups contain...
Municipal solid waste incineration fly ash (FA) can represent a sustainable supply of supplementary material to the construction industries if it is pre-treated to remove hazardous substances such as chloride, sulfate, and heavy metals. In this paper...
The Uragen giant sandstone-hosted Zn–Pb deposit has a proven reserve of 5.90 Mt metals in the southern ore zone and potentially 10 Mt metals for the whole deposit, and orebodies are strictly confined to the bleached clastic rocks of the Lower C...
Ground Penetrating Radar (GPR) is a geophysical method that uses antennas to transmit and receive high-frequency electromagnetic waves to detect the properties and distribution of materials in media. In this paper, geological observation, UAV detecti...
The closing time of the Paleo-Asian Ocean and the tectonic evolution of the northern margin of the North China Craton are still controversial. The geochronology and geochemistry of the Zhaojinggou monzogranite pluton provide new constraints on the la...
The Mesoproterozoic Kibaran belts host large amounts of mineral resources such as cassiterite, wolframite, gold, and columbite-group minerals (“coltan”), all of them in high demand for new technologies and related industries. Most of thes...
Multiple-input and multiple-output (MIMO) systems can be found in many industrial processes, including mining processes. In practice, these systems are difficult to control due to the interactions of their input variables and the inherent uncertainty...
Fluoride-rich fluid is believed to be able to activate and migrate Ti and other high field-strength elements to the greatest extent. The stability of F-rich titanium complexes can ensure their migration in the fluid, but is inseparable from the physi...
The interpretation of three-dimensional (3-D) magnetotelluric (MT) data is usually based on the isotropic assumption of the subsurface structures, and this assumption could lead to erroneous interpretation in the area with considerable electrical ani...
of 3
